• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.2
• /
• pp.38-45
• /
• 2009

In this paper, we propose an efficient cooperative diversity technique, which partition the codewords of each mobile and transmit portions of each codeword through independent fading channels using duo-binary turbo codes. A coded diversity technique can achieve high cooperative diversity gain by decoding and transmitting of the re-encoded signal, while this can also cause high performance degradation due to failure of the decoding. In this paper, we introduce various coded diversity technique using duo-binary turbo codes which are defined as channel coding schemes in the IEEE WiMax specification, and also demonstrate performance simulation results with the analysis. We also propose a cooperative diversity technique using rate-compatible duo-binary turbo codes, where user terminals with different parity symbols cooperate each other. Simulation results investigated in this paper reveal that the proposed scheme show high diversity gain at a reasonal SNR range.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.1
• /
• pp.155-161
• /
• 2007

This paper presents the design simulation, implementation, and measurement of a miniaturized PCS / Satellite DMB dual-band stacked mompole antenna with a parasitic patch for mobile communication terminals. A stacked helix is realized by using a via hole with height of 0.4 mm and a diameter of 0.35 mm to connect upper- and lower-layer helix sections for a reduction of the dimensions of the antenna. In addition the stacked helix chip antenna is interleaved with a parasitic patch to achieve two different radiation modes. The ratio of the first frequency and the second frequency vary with the geometrical parameter of the parasitic patch. The fabricated antenna uses FR-4 substrate with a relative permittivity of 4.2. Its dimensions are $15.5{\times}7.6{\times}0.4 mm^3$. The measured impedance bandwidths (VSWR<2) are 240 and 250 MHz at the operating frequencies, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.9
• /
• pp.2227-2235
• /
• 2009

This paper describes the system configuration and measured performances of a wireless power transmission system which utilizes microwave. The technically final target of this system is to provide DC power to various mobile terminals within limited spaces such as buildings, conference rooms, and so on. The prototype system is built using in-house designed and fabricated circuits such as microwave oscillator, high power amplifier, microstrip patch antenna, low pass filter, and detector/rectifier. The fixed RF power of 29.3dBm at 2.4GHz is produced from the high power amplifier and transmitted through the transmitting antenna, while the received RF power at the receiving antenna is transformed into DC power through the detector/rectifier. The measured change of DC voltage according to the distance between transmitting and receiving antenna is described.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.7
• /
• pp.15-21
• /
• 2015

Due to the appearance of various mobile terminals like smartphone, smartpad, and smartwatch and tremendous development of WiFi technology, data utilization rate on WiFi network is significantly increasing. As a result, users are wanting to use WiFi network using only a simple identification at a visited place as if they are at their home institute. In this paper, we review the domestic status of eduroam service which supports global extension of wireless network access environment and present the future development perspective of the service in Korea. Besides, we shed light on the current status of WiFi sharing service between domestic universities and propose some methods to facilitate the join of domestic universities in eduroam service.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.628-631
• /
• 2014

Recently, the proliferation of new applications, e.g., mobile TV, Internet gaming, large file transfer, and the various of user terminals, e.g., smart phones and notebooks, has dramatically increased user traffic and network load. In order to meet this traffic growth, vendors and cellular operators are working on the development of new technologies and cellular standards. Within them, small cell deployment has been heralded as one of most promising way to increase both coverage and capacity of future cellular network. Small cell technology enables to improve capacity of cellular radio network by tight cooperation between small cell and macro cell in multi-tier network where small cells are densely deployed within macro cell coverage. In this paper, we describe the deployment scenarios for cooperation between macro cell and small cells and state-of-the-art technologies related to dense small cell deployment. Then, we also provide design principles and standardization trends for small cell enhancement in 3GPP.

• Journal of Advanced Navigation Technology
• /
• v.24 no.6
• /
• pp.521-526
• /
• 2020

In this paper, we propose a design method and process for hybrid V2X communication platform that combines WAVE communication and LTE-V2X communication which are C-ITS communication protocols for vehicle environments and Legacy LTE communication which is a commercial mobile communication for evaluating the autonomous platooning platform of commercial vehicles. For a safe and efficient autonomous platooning platform, an low-latency communication function based on C-ITS communication is required, and to control it, commercial communication functions such as Legacy LTE, which can be connected at all times, are required. In order to evaluate such a system, the evaluation equipment must have the same level of communication performance or higher. The main design contents presented in this paper will be applied to the implementation of hybrid V2X terminals for functional evaluation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.9
• /
• pp.1305-1311
• /
• 2022

With the recent rapid development of mobile terminals and personal computers and the advent of neural network technology, real-time face swapping using images has become possible. In particular, the cycle generative adversarial network made it possible to replace faces using uncorrelated image data. In this paper, we propose an input data processing scheme that can improve the quality of face swapping with less training data and time. The proposed scheme can improve the image quality while preserving facial structure and expression information by combining facial landmarks extracted through a pre-trained neural network with major information that affects the structure and expression of the face. Using the blind/referenceless image spatial quality evaluator (BRISQUE) score, which is one of the AI-based non-reference quality metrics, we quantitatively analyze the performance of the proposed scheme and compare it to the conventional schemes. According to the numerical results, the proposed scheme obtained BRISQUE scores improved by about 4.6% to 14.6%, compared to the conventional schemes.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.4D
• /
• pp.535-544
• /
• 2009

Even though Korea's national project - NGIS(National Geographic Information System) has been built since 1995 and the GIS database for underground facilities has also been built, not so many systems are utilizing those databases currently. Also, the waterworks GIS developed and operated by K-Water is not used effectively in supporting field works. In order to manage and operate the waterworks pipelines effectively, systematic supporting strategy must be established by adopting the state-of-the-art technology. In this research, a ubiquitous-based strategy for managing waterworks facilities is proposed to increase the usability of the existing related databases and to ensure the systematic way of distributing information. The current status of the existing waterworks GIS and GIS database were analyzed to achieve the goal. By studying the state-of-the-art technology, we found that importing the LBS technology to the databases is necessary. The results of these efforts are exclusive waterworks-mobile-terminals and LBS system supporting them. Furthermore, the applicability of the ubiquitous technology to waterworks has been examined to realize the real-time waterworks management.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.585-587
• /
• 2022

The visual motivation between AP devices is NTP-based visual motivation through the access of the Internet through the internal wired LAN, but this has several seconds of visual difference in hundreds of milliseconds (msec) depending on the network. The frame for the output of the video will vary depending on the application, but usually 24 (image) frames are output to the screen in one second. Therefore, the visual synchronization between peripheral devices can be performed through the adjacent moving camera device, not the wired method. The programming method of generating API for synchronization command when creating an application for visual synchronization and delivering it to AP through MAC may differ from the time in synchronization command according to the environment of the operating system at the transmission side and the situation of the buffer queue of the MAC. Therefore, as a method to solve this problem, the renewal of visual information in the device driver terminal controlling MAC can be much more effective.

• Journal of Satellite, Information and Communications
• /
• v.2 no.2
• /
• pp.22-28
• /
• 2007

Spectrum spreading, in its general form, can be conceived as an artificial expansion of the signal bandwidth with respect to the minimum Nyquist band required to transmit the desired information. Spreading can be functional to several objectives, including resilience to interference and jammers and reduction of power spectral density levels. In the paper, signal spreading is manly used for increasing the received energy, thus satisfying link budget constraints, for terminals with low aperture antennas, without increasing the transmitted EIRP. As a matter of fact, in many mobile scenarios, even when MODCOD configurations with very low spectral efficiency (i.e. QPSK-1/4) in DVB-S2 standard, are used, the link budget cannot be closed. Spectrum spreading has been recently proposed as a technique to improve system performance without introducing additional MODCOD configurations under the constraint of fixed power spectrum density level at the transmitter side. To this aim, the design of spectrum spreading techniques shall keep into consideration requirements such as spectrum mask, physical layer performance, link budget, hardware reuse, robustness, complexity, and backward compliance with existing commercial equipments. The proposed implementation allows to fully reuse the standard DVB-S2 circuitry and is inserted as an 'inner layer' in the standard DVB-S2 chain.