• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.19 no.1
• /
• pp.20-30
• /
• 1993

Liquid Chromatographic behavior of Pd(II) in Isonitosoethylacetoacetate imine IEAA-NR: R=H, CH3, C2H5, n-C3H7, n-C4H9, C6H5-CH2) Chelates were investigated by reversed phase high performance 1iquid chromatography on Micropak MCH-5 Column using Methanol /water as mobile phase. The optimum condition for the separation of Pd-Isonitrosoethylacetoacetate imine chelates were examined with respect to the flow rate, mobile phase strength. It was found that Pd(IEAA-NR)2 chelates were eluted in an acceptable range of the capacity factor value (0 $\leq$ log k' $\leq$ 1), The dependence of the logarithm of capacity factor(k') on the volume fraction of water in mixture with in the binary mobile phase was examined. Also, the dependence of k'on the liquid-liquid extraction distribution constant in methanol-water / n-alkane extraction system was on system was invert tigated for Pd(IEAA-NR)2. Both kinds of dependence are linear, which suggests that the retention of the electroneutral metal chelates be largely due to the solvophobic effect.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.136-141
• /
• 2007

The frequency accuracy and phase alignment is necessary for ensuring the quality of service (QoS) for applications such as voice, real-time video, wireless hand-off, and data over a converged access medium at the telecom network. As telecom networks evolve from circuit to packet switching, proper synchronization algorithm should be meditated for IP networks to achieve performance quality comparable to that of legacy circuit-switched networks. The Time of Packet (ToP) specified in IEEE 1588 is able to synchronize distributed clocks with an accuracy of less than one microsecond in packet networks. But, The ToP can be affected by impairments of a network such as packet delay variation. This paper proposes the efficient method to minimize the expectable delay variation when ToP synchronizes the distributed clocks. The simulation results are presented to demonstrate the improved performance case when the efficient ToP transmit algorithm is applied.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.230-235
• /
• 2008

With the advent of the telecommunication era, a mobile phone becomes a necessary communication device in modern society. For silent tactile signal, vibration motors have become one of the generic components in most mobile phones. Conventional vibration motors employ three-phase windings with mechanical brushes for commutation. However, mechanical commutation in these prior arts greatly deteriorates its life span, reliability, and productivity due to structural intricacy. This paper introduces a novel design of solenoid-type vibrators using electromagnetic and mechanical analysis. The proposed vibrators have a simpler structure and longer life span by eliminating wear-prone commutation parts in vibration motors.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.123.1-123
• /
• 2001

For Autonomous navigation of the mobile robots, the robots' capability to recognize 3D environment is necessary. In this paper, an on-line 3D map building method for autonomous mobile robots is proposed. To get range data on the environment, we use an sensor system which is composed of a structured light and a CCD camera based on optimal triangulation. The structured laser is projected as a horizontal strip on the scene. The sensor system can rotate $\pm$ $30{\Circ}$ with a goniometer. Scanning the system, we get the laser strip image for the environments and update planes composing the environment by some image processing steps. From the laser strip on the captured image, we find a center point of each column, and make line segments through blobbing these center poings. Then, the planes of the environments are updated. These steps are done on-line in scanning phase. With the proposed method, we can efficiently get a 3D map about the structured environment.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.123.5-123
• /
• 2001

For autonomous navigation of the mobile robots, the robots' capability to recognize 3D environment is necessary. In this paper, an on-line 3D map building method for autonomous mobile robots is proposed. To get range data on the environment, we use a sensor system which is composed of a structured light and a CCD camera based on optimal triangulation. The structured laser is projected as a horizontal strip on the scene. The sensor system can rotate$\pm$30$^{\circ}$ with a goniometer. Scanning the system, we get the laser strip image for the environments and update planes composing the environment by some image processing steps. From the laser strip on the captured image, we find a center point of each column, and make line segments through blobbing these center points. Then, the planes of the environments are updated. These steps are done on-line in scanning phase. With the proposed method, we can efficiently get a 3D map about the structured environment.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.1049-1052
• /
• 1999

We present a use. interface(UI) simulator for developing a mobile phone. This simulator consists of 3 major modules: Graphic Tool Editor, User Interface Software(UI), and Network Command Processor(NCP). The Graphic Tool Editor can design a virtual mobile terminal. The NCP sends a command to the phone and then receives its status from the phone after completion of the command. We can add or modify lots of features easily to the phone using the UI module. These modules can interact each other by sharing the common area in the memory. By doing so, these modules can exchange their status and data to operate in real-time. We have designed and tested a virtual prototyping phone for the LGP 3200 manufactured by LGIC by using the simulator. Through a series of experiment, we have believed that our virtual prototyping interactive simulator can do shorten its development and testing cycle by applying it in the early design phase.

• Journal of Korean Association for Spatial Structures
• /
• v.15 no.4
• /
• pp.99-105
• /
• 2015

The serviceability design of the high-rise building is affected by the wind response vibration such as the acceleration, at this time it is important to calculate the natural frequency correctly. Since the suggestion equation of the natural frequency being used in the design phase is not the regression equation obtained from the vibration measurement of the high-rise building, the verification to use for the serviceability design of the high-rise building is necessary. This thesis conducted an ambient vibration measuring on the high-rise building through the mobile-phone application to calculate the natural frequency and suggested a natural frequency approximate expression following the building's height, and compared with the domestic/foreign standard and the result of the eigen-value analysis.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04b
• /
• pp.490-496
• /
• 1995

A four-legged mobile robot can move on the plain terrain with mobility and stability, but if there exist any obstacles on the terrain of the motion direction, it takes extra times for a mobile robot to cross those obstacles and the stability should be considered during motion. The main objevtive is the study of a quadruped which can cross obstacles with better mobility, stability and fuel economy than any other wheeled or tracked vehicles. Vertical step, isolated wall and ditch are the basic obstacles and by understanding those three cases perfectly, a quadruped can move on any mixed rough terrain as 4-legged animal moves. Each leg of a determine the crossing capability in a static analysis. A quadruped can be simplified with links and joints. By applying the research method, a quadruped can determine the control procedures as soon as it receives the terrain informations from scanner and finally can be moved as animals move with mobility and stability.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.5A
• /
• pp.537-544
• /
• 2004

In this paper, we p개pose DS-CDM-SQAM(Superposed Quadrature Amplitude Modulation) which is characterized by its smooth phase transition and small envelope fluctuation, and improves the power efficiency as compared to DS-CDM-QPSK of satellited-based DMB system(ITR-R BO.1130-4 System E) in a nonlinearly amplified channel. Computer simulation results show that the proposed DS-CDM-SQAM improves Eb/No by 1.7㏈ to maintain BER=1${\times}$$10^{-3}$ in nonlinearly amplified multipath mobile radio environments. Therefore, the proposed DS-CDM-SQAM system significantly improves the power efficiency in nonlinear land mobile satellite DMB environments.

• Electronics and Telecommunications Trends
• /
• v.33 no.5
• /
• pp.1-12
• /
• 2018

One of the most remarkable aspects of the recently completed 3GPP release-15 (5G new radio phase 1) is the fact that some millimeter-wave bands have been officially approved for 5G mobile communications. Because the demand for higher transmission capacity has only grown, other millimeter-wave or even higher-frequency terahertz-wave bands have attracted more attention over time. Based on this effort, this paper reviews and discusses the existing technologies and their trends in high-frequency circuits and systems at the millimeter and terahertz-wave bands, particularly for future mobile communications.