• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.9
• /
• pp.809-815
• /
• 2004

Researches on mobile robots have been mainly focused on the autonomous navigation and a lot of interesting results have been published so far. Most of applications are, however, fancy, unpractical, and very expensive to be used for 'UN-expensive' purpose. Well-known soccer robot may be an example of unpractical application. Un-autonomous mobile robot has, however, potential for a lot of practical applications. Especially, tele-operation of the un-autonomous mobile robot may the central issue of research. Major research topics for the tele-operated un-autonomous mobile robot include development of a force reflecting joystick for tele-operation and development of a sophisticated algorithm for smooth tele-operation. A new concept named fuzzy command smoothing algorithm is proposed in this paper in order to provide smooth motion to a tele-operated mobile robot. It gives smooth motion command to the mobile robot from possibly abrupt quick turn motion command of the joystick using fuzzy logic. Simulation results verify the usefulness of the proposed algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10b
• /
• pp.810-815
• /
• 1988

This paper presents a mobile robot that travels employing visual information. The mobile robot is equipped solely with a TV camera as a sensor, and views from the TV camera are transferred to a separately installed micro computer through an image acquisition device. An acquired image of a view is processed there and the information necessary for travel is yielded. Instructions based on the information are then sent from the micro computer to the mobile robot, which causes the mobile robot next action. Among several application programs that have already been developed for the mobile robot other than the entire control program, this paper focuses its attention on the travelling control of the mobile robot in a model environment with obstructions as well as an overview of the whole system. The behaviour the present mobile robot takes when it travels among obstructions was investigated by an experiment, and satisfactory results were obtained.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.2
• /
• pp.114-120
• /
• 2007

This paper introduces a mobile robotic system being developed for urban search and rescue. In order to search human victims in narrow spaces, we developed two types of serially linked mobile robots, named KAEROT-Centipede and KAEROT-SnakeTV1, that can climb over large vertical steps or travel inside narrow vertical pipes. To send such mobile robots to the disaster areas coping with large obstacles, we also developed a assistant mobile robot, named KAEROT-QuadTrack, that has 4 articulated track modules. This paper describes the mechanical structure and control architecture of the serially linked mobile robots and the supporting configuration for torque reduction of the assistant mobile robot during spinning motion that usually requires large driving torque. The experimental results show that such robotic systems have good mobility over the various terrains in disaster areas.

• Journal of Internet Computing and Services
• /
• v.7 no.4
• /
• pp.79-90
• /
• 2006

Data broadcasting is an efficient method for disseminating data, and is widely accepted in the database applications of mobile computing environments because of its asymmetric communication bandwidth between a server and mobile clients. This requires new types of concurrency control mechanism to support mobile transactions executed in the mobile clients, which have low-bandwidths toward the server. In this paper, we propose an OCC/DTA (Optimistic Concurrency Control with Dynamic Time-stamp Adjustment) protocol that can be efficiently adapted to mobile computing environments. The protocol reduces communication overhead by using client-side validation procedure and enhances transaction throughput by adjusting serialization order without violating transaction semantics. We show that the proposed protocol satisfies data consistency requirements, and simulate that this protocol can improve the performance of mobile transactions in data broadcasting environments.

• Journal of the Korean Society for Railway
• /
• v.16 no.6
• /
• pp.519-527
• /
• 2013

Mobile radio technologies have evolved in the railway industry offering seamless connectivity and various functionalities to improve railway service. Recently, advanced mobile communication technologies have enabled a new level of railway customer services with more efficient railway operation. Since the LTE mobile communication technology offers many benefits and better performance for new railway services, it is considered to be a strong candidate for the future railway mobile telecommunication. However, communication networks in the railway sector are critical for secure operation and have stringent requirements for reliability and safety. In this paper, we explain the requirements for the future railway mobile telecommunication. The LTE, which would be the future railway mobile technology, is analyzed against these requirements. We also introduce the current state of standardization for the future railway mobile telecommunication and its implementation plan.

• Journal of Communications and Networks
• /
• v.18 no.3
• /
• pp.460-475
• /
• 2016

The existing Proxy Mobile IPv6 suffers from a long handover latency which in turn causes significant packet loss that is unacceptable for seamless realtime services such as multimedia streaming. This paper proposes an OpenFlow-enabled proxy mobile IPv6 (OF-PMIPv6) in which the control of access gateways is centralized at an OpenFlow controller of a foreign network. The proposed OF-PMIPv6 separates the control path from the data path by performing the mobility control at the controller, whereas the data path remains direct between a mobile access gateway and a local mobility anchor in an IP tunnel form. A group of simple OpenFlow-enabled access gateways performs link-layer control and monitoring activities to support a comprehensive mobility of mobile nodes, and communicates with the controller through the standard OpenFlow protocol. The controller performs network-layer mobility control on behalf of mobile access gateways and communicates with the local mobility anchor in the Proxy Mobile IPv6 domain. Benefiting from the centralized view and information, the controller caches the authentication and configuration information and reuses it to significantly reduce the handover latency. An analytical analysis of the proposed OF-PMIPv6 reactive and proactive handover schemes shows 43% and 121% reduction in the handover latency, respectively, for highly utilized network. The results gathered from the OF-PMIPv6 testbed suggest similar performance improvements.

• Journal of Korea Game Society
• /
• v.16 no.6
• /
• pp.49-58
• /
• 2016

This paper proposes three schemes of one-hand control that can be used in the First-Person Viewpoint mobile games and evaluates them. Displaying virtual controllers on the screen, the existing mobile games use schema that allows users use both hands. In the First-Person Viewpoint mobile games, however, one-hand control is possible because smaller number of functions for viewpoint movement is required. This research proposes three one-hand control schemes for First-Person Viewpoint movement and rotation, and evaluates them using AHP. The experiment results prove that one-hand control schemes are more useful than both-hands control schemes for the mobile game users.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.734-739
• /
• 2003

A new method of estimating the pose of a mobile-task robot is developed based upon an active calibration scheme. The utility of a mobile-task robot is widely recognized, which is formed by the serial connection of a mobile robot and a task robot. For the control of the mobile robot, an absolute position sensor is necessary. This paper proposes an active calibration scheme to estimate the pose of a mobile robot that carries a task robot on the top. The active calibration scheme is to estimate a pose of the mobile robot using the relative position/orientation to a known object whose location, size, and shape are known a priori. Through the homogeneous transformation, the absolute position/orientation of the camera is calculated and that is propagated to getting the pose of a mobile robot. With the experiments in the corridor, the proposed active calibration scheme is verified experimentally.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.5
• /
• pp.713-721
• /
• 2008

This paper presents the robust velocity estimation of an omnidirectional mobile robot using a polygonal array of optical mice that are installed at the bottom of the mobile robot. First, the velocity kinematics from a mobile robot to an array of optical mice is derived as an overdetermined linear system. The least squares velocity estimate of a mobile robot is then obtained, which becomes the same as the simple average for a regular polygonal arrangement of optical mice. Next, several practical issues that need be addressed for the use of the least squares mobile robot velocity estimation using optical mice are investigated, which include measurement noises, partial malfunctions, and imperfect installation. Finally, experimental results with different number of optical mice and under different floor surface conditions are given to demonstrate the validity and performance of the proposed least squares mobile robot velocity estimation method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.10
• /
• pp.881-889
• /
• 2002

Mobility analysis for various mobile mechanisms including mechanisms with lack of geometric generality is performed. Joint screws are employed to find the sire of feasible joint motion space or each of independent loops of mobile mechanisms. Particularly, the concept of "representative screws" is introduced to represent the feasible motion spaces for subsets of joints belonging to either a loop or a sub-system consisting of several closed loops. Firstly. simplified joint model for each of low different typical wheels popularly employed in mobile robots is described. Then. mobility analysis fir various types of planar mobile robots and the Mars Rover mobile robot for navigation on the rocky road on Mars arc performed. It is confirmed that the obtained results in this study coincide with the previous ones which were obtained by suing imaginary Joints approach(1)pproach(1)