• ETRI Journal
• /
• v.35 no.1
• /
• pp.120-130
• /
• 2013

This paper presents an analysis of resource assignment for multihop communications in millimeter-wave (mm-wave) wireless personal area networks. The purpose of this paper is to figure out the effect of using directional antennas and relaying devices (DEVs) in communications. The analysis is performed based on a grouping algorithm, categorization of the flows, and the relaying DEV selection policy. Three schemes are compared: direct and relaying concurrent transmission (DRCT), direct concurrent transmission (DCT), and direct nonconcurrent transmission (DNCT). Numerical results show that DRCT is better than DCT and DCT is better than DNCT for any antenna beamwidths under the proposed algorithm and policy. The results also show that using relaying DEVs increases the throughput up to 30% and that there is an optimal beamwidth that maximizes spatial reuse and depends on parameters such as the number of flows in the networks. This analysis can provide guidelines for improving the performance of mm-wave band communications with relaying DEVs.

• Journal of Communications and Networks
• /
• v.18 no.3
• /
• pp.364-374
• /
• 2016

With vast amounts of spectrum available in the millimeter wave (mmWave) band, small cells at mmWave frequencies densely deployed underlying the conventional homogeneous macrocell network have gained considerable interest from academia, industry, and standards bodies. Due to high propagation loss at higher frequencies, mmWave communications are inherently directional, and concurrent transmissions (spatial reuse) under low inter-link interference can be enabled to significantly improve network capacity. On the other hand, mmWave links are easily blocked by obstacles such as human body and furniture. In this paper, we develop a multi-hop relaying transmission (MHRT) scheme to steer blocked flows around obstacles by establishing multi-hop relay paths. In MHRT, a relay path selection algorithm is proposed to establish relay paths for blocked flows for better use of concurrent transmissions. After relay path selection, we use a multi-hop transmission scheduling algorithm to compute near-optimal schedules by fully exploiting the spatial reuse. Through extensive simulations under various traffic patterns and channel conditions, we demonstrate MHRT achieves superior performance in terms of network throughput and connection robustness compared with other existing protocols, especially under serious blockage conditions. The performance ofMHRT with different hop limitations is also simulated and analyzed for a better choice of the maximum hop number in practice.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.8
• /
• pp.3-10
• /
• 2014

Millimeter wave (mmWave) has attracted great interest recently and the necessity of Millimeter Mobile Broadband (MMB) system has appeared based on the 4 Generation Long Term Evolution-Advanced (LTE-A) Specification. Currently, there are many studies about the mmWave communication channel. And it is subject of interest to analyze the performance in MMB channel environments. In this paper, we design the MMB system for 5th Generation mobile communication and propose channel models through the analysis of the mmWave propagation characteristics. Also, we have analyzed the performance of the MMB system of 28 GHz band in MMB channel environments.

• ETRI Journal
• /
• v.36 no.3
• /
• pp.374-384
• /
• 2014

To achieve high-speed (giga-bit) connectivity for short-range wireless multimedia applications, the millimeter-wave (mmWave) wireless personal area networks with directional antennas are gaining increased interest. Due to the use of directional antennas and mmWave communications, the probability of non-interfering transmissions increases in a localized region. Network throughput can be increased immensely by the concurrent time allocation of non-interfering transmissions. The problem of finding optimum time allocation for concurrent transmissions is an NP-hard problem. In this paper, we propose two enhanced versions of previously proposed multi-hop concurrent transmission (MHCT) schemes. To increase network capacity, the proposed schemes efficiently make use of the free holes in the time-allocation map of the MHCT scheme; thus, making it more compact.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.11
• /
• pp.1074-1077
• /
• 2013

This paper analyzes the benefit of using directional antennas against eavesdropping attack in millimeter wave (mmWave)-based networks. All devices are equipped with a directional antenna or an omni-directional antenna in a single-hop communications. The probability of a device being detected by an eavesdropper is analyzed based on the exposure region of a device. The relative detection rate is introduced to represent the benefit of using directional antenna. Numerical results show that there exists an optimal number of devices that maximizes the detection probability and it varies according to the parameters such as antenna beamwidth. It shows that the use of directional antenna enables to protect the devices from the detection by an eavesdropper for almost the whole situation in mmWave band communication.

• Information and Communications Magazine
• /
• v.34 no.6
• /
• pp.3-10
• /
• 2017

최근 운전자의 편의성과 안전성 향상을 위한 커넥티드 카 및 자율주행 차량에 대한 관심과 연구가 집중되고 있다. 이러한 커넥티드 카와 자율주행 차량의 경우 대용량의 멀티미디어 전송 및 센서 데이터 공유 등 다양한 서비스를 위해 높은 전송용량과 신뢰성을 보장할 수 있는 vehicle-to-vehicle (V2V) 통신과 vehicle-to- infrastructure (V2I) 통신에 대한 기본적인 연구와 구현이 필수적이다. 이러한 요구사항을 만족시키기 위해서 최근 mmWave 기반의 V2V, V2I에 대한 연구가 큰 주목을 받고 있다. 본고에서는 mmWave 대역 V2V 및 V2I 기술의 필요성과 채널에 관련된 기존 연구를 살펴보고, 이를 기반으로 현재까지 연구된 mmWave 대역 V2V, V2I 관련 연구에 대해 살펴보고자 한다. 또한 기존 연구의 한계점을 확인하고, 향후 연구방향과 주제에 대해 논의하고자 한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.7
• /
• pp.2010-2026
• /
• 2024

This work investigates the hybrid precoder scheme in a millimeter wave (mmWave) multi-user MIMO system. We study a sum rate maximization scheme by jointly designing the digital precoder and the analog precoder. To handle the non-convex problem, a block coordinate descent (BCD) method is formulated, where the digital precoder is solved by a bisection search and the analog precoder is addressed by the penalty dual decomposition (PDD) alternately. Then, we extend the proposed algorithm to the sub-connected schemes. Besides, the proposed algorithm enjoys lower computational complexity when compared with other benchmarks. Simulation results verify the performance of the proposed scheme and provide some meaningful insight.

• Journal of Communications and Networks
• /
• v.16 no.5
• /
• pp.512-522
• /
• 2014

This paper proposes fast millimeter-wave (mm-wave) beam training protocols with receive beamforming. Both IEEE standards and the academic literature have generally considered beam training protocols involving exhaustive search over all possible beam directions for both the beamforming initiator and responder. However, this operation requires a long time (and thus overhead) when the beamwidth is quite narrow such as for mm-wave beams ($1^{\circ}$ in the worst case). To alleviate this problem, we propose two types of adaptive beam training protocols for fixed and adaptive modulation, respectively, which take into account the unique propagation characteristics of millimeter waves. For fixed modulation, the proposed protocol allows for interactive beam training, stopping the search when a local maximum of the power angular spectrum is found that is sufficient to support the chosen modulation/coding scheme. We furthermore suggest approaches to prioritize certain directions determined from the propagation geometry, long-term statistics, etc. For adaptive modulation, the proposed protocol uses iterative multi-level beam training concepts for fast link configuration that provide an exhaustive search with significantly lower complexity. Our simulation results verify that the proposed protocol performs better than traditional exhaustive search in terms of the link configuration speed for mobile wireless service applications.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.10a
• /
• pp.125-127
• /
• 2012

With the progress of electronics and radio communication technology, human enjoys greater freedom in communication. However, EMW (Electro-Magnetic wave) environments have became complicate and more difficult to control. Thus, international organizations, such as the American National Standard Institution (ANSI), Federal Communications Commission (FCC), the Comite Internationale Special des Perturbations Radio electrique (CISPR), etc, have provided standard for controlling the EM wave environments and for the countermeasure of the electromagnetic compatibility (EMC). In this paper, the status of EMW absorber and the goal of smart EMW absorber ifor the future were described. Furthermore, design method of the smart EM wave Absorber with heat radiating function was suggested. The designed smart EM wave Absorber has the absoption ability of more than 5 dB from 2 GHz to 2.45 GHz band, one optimum aperture (hole) size of which was 6 mm, 9 mm in adjacent hole space, and 6.5 mm in thickness, respectivly. Thus, it is repected that these results can be applied to various EMC devices in electronic, communication, and controlling systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.1
• /
• pp.25-30
• /
• 2017

Millimeter wave (mmWave) bands are expected to improve date rate of 5G systems due to the wide available bandwidth. While severe path loss in those bands has impeded the utilization, short wavelength enables a large number of antennas packed in a compact form, which can mitigate the path loss. However, estimating the channel with a conventional scheme requires a huge training overhead, hence an efficient estimation scheme operating with a small overhead needs to be developed. The sparsity of mmWave channels caused by the limited scatterers can be exploited to reduce the overhead by utilizing compressed sensing. In this paper, we introduce compressed sensing techniques for mmWave channel estimation. First, we formulate wideband channel estimation into a sparse recovery problem. We also analyze the characteristics of random measurement matrix constructed using quantized phase shifters in terms of mutual incoherence.