• Journal of Korean Neurosurgical Society
• /
• v.56 no.2
• /
• pp.130-134
• /
• 2014

Objective : A groove technique for securing an electrode connector was described as an alternative surgical technique in deep brain stimulation (DBS) surgery to avoid electrode connector-related complications, such as skin erosion, infection, and migration. Methods : We retrospectively reviewed 109 patients undergoing one of two techniques; the standard technique (52 patients using 104 electrodes) and the groove technique (57 patients using 109 electrodes) for securing the electrode connector in DBS surgery, regardless of patient disease. In the standard percutaneous tunneling technique, the connector was placed on the vertex of the cranial surface. The other technique, so called the groove technique, created a groove (about 4 cm long, 8 mm wide) in the cranial bone at the posterior parietal area. Wound erosion and migration related to the connectors were compared between the two techniques. Results : The mean follow-up period was 73 months for the standard method and 46 months for the groove technique. Connector-related complications were observed in three patients with the groove technique and in seven patients with the standard technique. Wound erosion at the connector sites per electrode was one (0.9%) with the groove technique and six (5.8%) with the standard technique. This difference was statistically significant. The electrode connector was migrated in two patients with the groove technique and in one patient with the standard technique. Conclusions : The groove technique, which involves securing an electrode using a groove in the cranial bone at the posterior parietal area, offers an effective and safe method to avoid electrode connector-related complications during DBS surgery.

• Archives of Plastic Surgery
• /
• v.38 no.6
• /
• pp.740-746
• /
• 2011

Purpose: In the treatment of the unilateral cleft lip nasal deformities, the correction of the low-nostril height and short-columella are very difficult problems. We report the treatment outcomes of web uni-limb Z-plasty used for correction of unilateral cleft lip nasal deformities by using photographic analysis. Methods: A total of 36 patients with unilateral cleft lip nasal deformities were enrolled in this study, who underwent web uni-limb Z-plasty and were followed up for at least 6 months. First, a triangular flap was made on the medial side of alar-columella web. The nostril apex of cleft side was corrected to a higher point compared to noncleft side by 2 mm. The flap was transposed into the defect of the vestibule. To reduce the bulging of the flap, horizontal cinching sutures were added. Postoperative outcomes were evaluated by using photographic analysis. 2 indices and 1 angle were measured on their photographs taken before and after the surgery. Symmetry was also evaluated by means of the noncleft side to cleft side index. For anthropologic assessment, observers described postoperative outcomes, using Ordinary Scale Method. Results: The postoperative values obtained in photographic analysis improved compared to preoperative ones. More improving anthropologic assessment was shown in post-than pre-operative. Conclusion: Although, further long term follow up is needed, we found this technique to be an effective procedure to the symmetry of nostril apex level and the lengthening of columella in the unilateral cleft lip nasal deformities.

• International Journal of Highway Engineering
• /
• v.18 no.3
• /
• pp.67-74
• /
• 2016

PURPOSES : This study evaluated the field applicability and laboratory performance of glass fiber-reinforced asphalt (GFRA) mixtures. METHODS : The general hot-mix asphalt (HMA) and GFRA mixtures were paved in five sites, including three national highways, one express highway, and an arterial road, to evaluate field applicability and durability. The plant mixing and construction method for the GFRA were similar to those for the general HMA. The lab performances of the field samples were relatively compared through the mechanical measures from the Marshall stability, indirect tensile strength, and dynamic stability. The field performance was surveyed after a year. RESULTS : The lab tests verified the superior lab performances of the GFRA compared to the general HMA. The Marshall stability of the GFRA increased for about 128% of the general HMA. The indirect tensile strength of the GFRA was 115% greater than that of the general HMA. The dynamic stability of the GFRA resulted in 16,180 reps/mm, which indicated that high rut resistance may be expected. No noticeable defects, such as cracks or deformation, were observed for the GFRA sections after a year. CONCLUSIONS : The lab tests and field survey for the five GFRA sites resulted in superior performances compared to the general HMA. The relatively low-cost GFRA, which required no pre-processing procedures, such as polymer modification, may be a promising alternative to the polymer-modified asphalt mixtures. The long-term performance will be verified by the superior field durability of the GFRA in the near future.

• Progress in Superconductivity
• /
• v.13 no.2
• /
• pp.105-110
• /
• 2011

SQUID sensor-based ultra low-field magnetic resonance apparatus with ${\mu}T$-level measurement field requires a strong prepolarization magnetic field ($B_p$) to magnetize its sample and obtain magnetic resonance signal with a high signal-to-noise ratio. This $B_p$ needs to be ramped down very quickly so that it does not interfere with signal acquisition which must take place before the sample magnetization relaxes off. A MOSFET switch-based $B_p$ coil driver has current ramp-down time ($t_{rd}$) that increases with $B_p$ current, which makes it unsuitable for driving high-field $B_p$ coil made of superconducting material. An energy cycling-type current driver has been developed for such a coil. This driver contains a storage capacitor inside a switch in IGBT-diode bridge configuration, which can manipulate how the capacitor is connected between the $B_p$ coil and its current source. The implemented circuit with 1.2 kV-tolerant devices was capable of driving 32 A current into a thick copper-wire solenoid $B_p$ coil with a 182 mm inner diameter, 0.23 H inductance, and 5.4 mT/A magnetic field-to-current ratio. The measured trd was 7.6 ms with a 160 ${\mu}F$ storage capacitor. trd was dependent only on the inductance of the coil and the capacitance of the driver capacitor. This driver is scalable to significantly higher current of superconducting $B_p$ coils without the $t_{rd}$ becoming unacceptably long with higher $B_p$ current.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.1
• /
• pp.17-29
• /
• 2013

Long-Term Hydrologic Impact Assessment (L-THIA) model which is a distributed watershed model was applied to analyze the spatial distribution of surface runoff and nonpoint source pollutant loading from Imha watershed during 2001~2010. L-THIA CN Calibration Tool linked with SCE-UA was developed to calibrate surface runoff automatically. Calibration (2001~2005) and validation (2006~2010) of monthly surface runoff were represented as 'very good' model performance showing 0.91 for calibration and 0.89 for validation as Nash-Sutcliffe (NS) values. Average annual surface runoff from Imha watershed was 218.4 mm and Banbyun subwatershed was much more than other watersheds due to poor hydrologic condition. Average annual nonpoint source pollutant loading from Imha wateshed were 2,295 ton/year for $BOD_5$, 14,752 ton/year for SS, 358 ton/year for T-N, and 79 ton/year for T-P. Amount of pollutant loading and pollutant loading rates from Banbyun watershed were much higher than other watersheds. As results of analysis of loading rate from grid size ($30m{\times}30m$), most of high 10 % of loading rate were generated from upland. Therefore, major hot spot area to manage nonpoint source pollution in Imha watershed is the combination of upland and Banbyun subwatershed. L-THIA model is easy to use and prepare input file and useful tool to manage nonpoint source pollution at screening level.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.6
• /
• pp.111-119
• /
• 2018

The air-void is known to be one of the influencing factors for estimating long-term performance of asphalt concrete. Most of all, confirming air void or density of pavement layer is important for quality control of field compaction level of asphalt concrete pavement. In this study, a non-nuclear type non-destructive density gage (NDDG) was used to estimate compacted air-voids of asphalt pavement as a non-destructive test method. Asphalt concrete slab specimens were prepared using 6 types of asphalt mixes in laboratory (lab) for lab NDDG test. Four different base structure materials were used to find out if there were any differences due to the type of base structure materials. The actual air-voids and NDDG air-voids were measured from 6 asphalt concrete slabs. Four sections of field asphalt pavements were tested using the NDDG, and actual air voids were also measured from field cores taken from the site where the NDDG air-void was measured. From lab and field experimental tests, it was found that the air-voids obtained by NDDG were not the same as the actual air-voids measured from the asphalt concrete specimen. However, it was possible to estimate air voids based on the relationship obtained from regression analysis between actual and NDDG air voids. The predicted air-voids based on the NDDG air-voids obtained from 50mm depth were found to be reliable levels with $R^2{\fallingdotseq}0.9$. Therefore, it was concluded that the air-voids obtained from NDDG could be used to estimate actual air-voids in the field asphalt pavement with a relatively high coefficient of determination.

• Reproductive and Developmental Biology
• /
• v.36 no.3
• /
• pp.141-145
• /
• 2012

The present study was conducted to develop a simple method for porcine oocyte maturation without $CO_2$ regulation. In experiment 1, we evaluated that the effect of $CO_2$ non-supplement on porcine oocyte maturation. Cumulusoocyte complexes (COCs) were collected from 2~6 mm follicles and divided into three groups (Control, tube-$CO_2$, and tube-non-$CO_2$). For control, COCs were cultured in 4-well multidish in a $CO_2$ incubator. For tube-$CO_2$, COCs were cultured in a round-bottom tube in a $CO_2$ incubator, and for tube-non-$CO_2$, COCs were cultured in a round-bottom tube sealed tightly without $CO_2$ supplement in a dry incubator. The proportion of oocytes reached to metaphase II (M-II) was not significantly different among three groups (87.9% to 91.4%). In experiment 2, we evaluated the effect of $CO_2$ non-supplement during oocyte maturation on development of embryos. Oocytes with a polar body were divided into two groups (Control and tube-non-$CO_2$) and applied 1.1 kV/cm or 1.2 kV/cm voltages for parthenogenetic activation. After activation, embryos were cultured for 6 days and examined the development. The proportion of embryos cleaved was not significantly different among treatment (86.3% to 91.5%). The proportion of embryo reached to blastocyst stage was not significantly different among treatment (13.9% to 25.2%). The cell number of blastocysts was not significantly different among treatment (29.0 to 32.4). In conclusion, oocytes cultured in a dry incubator without $CO_2$ supplement have enough competence to development after parthenogenetic activation. These results would be useful for transporting oocytes or embryos a long distance.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.19 no.4
• /
• pp.4533-4543
• /
• 1977

The purpose of this study was to investigate and compare flow discharges of rectangular, V-notch and trapezoidal type of cutthrooat flumes, and the published data for trapezoidal parshall flumes. And the trapezoidal cutthroat flumes were also compared in their accuracy of discharge measurements for various convergence ratios in the inlet section and divergence ratios in the outlet section. Five flumes were studied, and all the flumes were 45cm long with flat-bottom and were made of well-finished transparent acryl plate of 3mm thickness. One rectangular, one V-notch and three trapezoidal types were numbered 1 to 5 as shown in Fig. III-1. The measured depth of water was ranged from 5 to 20cm. The results obtained in this study are summarized as follows: 1. The general discharge equations for tested prototypes are listed for free flow in Table IV-1 and for submergence flow in Table IV-4. 2. In both free and submerged flow, the accuracy of the discharge formula obtained by this test is highly significant at 1% level as shown in Table IV-2 and Table IV-6. The accuracy of disharges measured depends upon the convergence and divergence ratios in the trapezoidal types: the less the ratios of convergence as well as divergence, the lower the accuracy. 3. Submergence ratios tend to increase in the order of flume number except flume No. 4. This implies that trapezoidal cutthroat flumes are more acceptable than rectangular or V-notch ones for free flow. 4. The transition submergence for the trapezoidal Parshall flumes ranges from 80-85 percent, which is slightly higher than the tested flume. However, the trapezoidal cutthroat flume No. 5 has higher transition submergence ratio, ranging from 73-78 percent, than other trapezoidal ones. The difference between the trapezoidal Parshall flumes and the trapezoidal cutthroat flumes in transition submergence seems small enough to be ignored in their field use. 5. Trapezoidal cutthroat flume is simple and economical to construct in existing openchannels whose shapes are generally trapezoidal. In order to obtain the best rating accuracy, flume No. 3 among the tested trapezoidal types is recommended, because it shows the highest accuracy for both free and submerged flow.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.1
• /
• pp.47-54
• /
• 2012

Agriculture is dependable to weather condition and its change so that it is necessary to understand the impacts of climatic change. The aim of this study is to analyze the change of consumptive use of water and rice yield due to climate change using CERES-Rice. In this study, the weather data of three emission scenario of A1B, A2 and B1 created from CGCM (Coupled General Circulation Model) were used from 2011 to 2100, and downscaled daily weather data were simulated using LARS-WG (Long Ashton Research Station Weather Generator). The input data for cultivated condition for simulating CERSE (Crop-Environment Resource Synthesis)-Rice were created referring to standard cultivation method of paddy rice in Korea. The results showed that consumptive uses of water for paddy rice were projected decreasing to 4.8 % (2025s), 9.1 % (2055s), 12.6 % (2085s) comparing to the baseline value of 403.5 mm in A2 scenario. The rice yield of baseline was 450.7 kg/10a and projected increasing to -0.4 % (2025s), 3.9 % (2055s), 17.5 % (2085s) in A1B scenario. The results demonstrated relationships between consumptive use of water and rice yields due to climate change and can be used for the agricultural water resources development planning and cultivation method of paddy rice for the future.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.4
• /
• pp.465-481
• /
• 2004

We determined Asian dust days by constructing the standard of Asian dust using PM$_{10}$ concentrations ($\geq$150 $\mu\textrm{g}$m$^{-3}$ , 24-hr average) and TOMS aerosol index ($\geq$0.7) for 5 years (1998-2002), and grouped Into long-lasted cases (LLCs, $\geq$4 days) and short-lasted cases (SLCs, $\leq$2 days) concerning the mean lasting time (about 3 days) of Asian dust. Further we performed the specific analyses associated with concentration variations and synoptic conditions by using PM$_{10}$ and TOMS data, weather maps during the dusty cases (LLCs and SLCs). As a result, the LLCs (9 cates) had large variations of PM$_{10}$ concentration as the mean of 131.1$\mu\textrm{g}$m$^{-3}$ and the maximum mean of 379.8$\mu\textrm{g}$m$^{-3}$ , and showed dominant features the continuous passage of deep trough caused by blocking effect and weak trough (56%, 5 cases) over Korea. The SLCs (11 cases) had relatively small variations of PM$_{10}$ concentration as the mean of 133.3$\mu\textrm{g}$m$^{-3}$ and the maximum mean of 247.2$\mu\textrm{g}$m$^{-3}$ , and showed passage of one weak trough (64%, 7 cases) over Korea. Thereafter, the case studies (April 7-13, 2002 of LLC and March 23-24, 2000 of SLC) performed by the simulation of MM5 with meteorological variables of the horizontal wind, potential temperature, isentropic potential vorticity, and helped to better understand the features of synoptic conditions in connection with the concentration variations for each case.