• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.243-248
• /
• 2001

A radial artery pulse wave is well known as a good mans to diagnose human body condition in th field of Chinese medical science. Information about constitution as well as organs can be obtained by detecting the artery pulse wave. Recently, the information about the human body constitution may be utilized in accelerating the recovery process of the patient on the basis of comprehensive diagnosis. A radial artery pulse wave is considered as one of promising means in examining the human body constitution. Since the examination has been conducted by the feeling of finger, the diagnosis may occasionally have uncertainty or fatal error. In this paper, a new measuring system is suggested and developed to examine the pattern of a pulse wave correctly. The system is composed of four pressure vessels, pressure sensors and air supplying pumps. One of them is utilized for appropriately pressing the radial artery, three of them for detecting pressure change in several mmHg level. The detected data is shown and discussed.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 후기학술대회논문집
• /
• pp.67-68
• /
• 2005

This thesis is concerned with basic research for development of EM wave absorbers in sheet type for mobile phones. By controlling the sendust ratio, the $Al(OH)_3$ coating, the thickness, the kind of binders, EM wave absorbers were prepared and examined. Centeral frequency shifts toward lower with increasing thickness of the absorber, and absorption ability controlled to adjust Sendust amount. The absorption band of the EM wave absorber coated with $Al(OH)_3$ becomes larger than that of non-coated one. Sendust composite microwave absorbers mixed with CPE were prepared at $70^{\circ}C$ in temperature. The fabricated EM wave absorbers show a reflection coefficient 5.56 dB at 1.8 GHz in thickness of 0.85 mm.

• Journal of information and communication convergence engineering
• /
• 제4권3호
• /
• pp.114-117
• /
• 2006

In this paper, we fabricated the EM wave absorber for 94 GHz radar sensors using Permalloy of magnetic material with chlorinated polyethylene (CPE), and S-parameter was measured. The complex relative permittivity and permeability are calculated by the measured data. Absorption abilities are simulated according to different thickness of the EM wave absorbers, and the EM wave absorber was manufactured based on the simulated design. Simulated and measured results agree very well. As a result, we developed the EM wave absorber with the thickness of 1.15 mm which has an absorption ability of 18 dB at 94 GHz.

• International Journal of Computer Science & Network Security
• /
• 제22권1호
• /
• pp.295-299
• /
• 2022

In this paper, a fast numerical electromagnetic (EM) method based on the transverse wave formulation called-up Advanced Transverse Wave Approach (A-TWA) is presented. An appropriate 5G antenna is designed, simulated and investigated in the context of Millimeter-Wave Wireless Communication Systems. The obtained simulation results are found in good agreement with literature. Such a method can provide for the simulators a great library integrating the most complexly and sensitively geometry elements that can have a huge impact on the applications supported by new wireless technologies.

• 대한전자공학회논문지SD
• /
• 제45권8호
• /
• pp.48-53
• /
• 2008

본 논문에서는 100 nm InGaAs/InAlAs/GaAs metamorphic HEMT (high electron mobility transistor)를 이용하여 94 GHz 대역 응용에 적용 가능한 MMIC (millimeter-wave monolithic integrated circuit) 저잡음 증폭기를 구현하였다. 94 GHz MMIC 저잡음 증폭기 구현을 위하여 제작된 $100nm\times60{\mu}m$ MHEMT의 측정결과, 655 mA/mm의 드레인 전류 밀도, 720 mS/mm의 최대전달컨덕턴스를 얻었으며, RF 특성으로 전류이득차단주파수는 195 GHz, 최대공진주파수는 305 GHz의 양호한 성능을 나타내었다. 구축된 MHEMT와 CPW 라이브러리를 이용하여 구현된 MMIC 저잡음 증폭기의 측정결과, 94 GHz에서 $S_{21}$ 이득은 14.8 dB, 잡음지수는 4.6 dB의 우수한 특성을 얻었다. 전체 칩의 크기는 $1.8mm\times1.48mm$이다.

• Progress in Superconductivity
• /
• 제10권1호
• /
• pp.1-5
• /
• 2008

Magnetocardiography (MCG) is a non-contact, non-invasive, and harmless diagnostic tool to detect the abnormal electrical conductivities of the heart caused by the various coronary artery disease or cardiac muscular disease. The purpose of this study is to identify whether MCG signals and MCG parameter values vary depending on the location of sensor assembly. It will be an important reference for the standard measurement. Four healthy male subjects (33.3$\pm$6.3 years) participated in this study. Basal recording was made at 20 mm apart from the chest surface. All subjects were requested to take a regular breathe while MCG was taken. The gap between the chest surface and the bottom of the sensor assembly was 20, 40, 60, and 80 mm. Recording was made using 64 channel MCG system (Axial type, first order gradiometer) developed by Korea Research Institute of Standards and Science (KRISS). After resting for two minutes in a supine position on the bed in magnetically shielded room, MCG were recorded for 30 s. As the sensor location is getting away from the chest surface signal, the amplitude of R and T wave peak decreases to 70% (at 40 mm gap), 50% (at 60 mm), and 37% (at 80 mm) of the reference strength measured (y = $1.3903e^{-0.0169x}$, $R^2$ = 0.99; where y=amplitude remained after reduction, x=distance between chest surface and sensor location). The regression equations may be used as a good reference to calculate how much strength will be decreased by the distance. In MCG parameters, most values of parameters were decreased as the gap was increased. As an example, the current moment at T-wave peak reduced to 52% (at 40 mm gap), 33% (at 60 mm), and 19% (at 80 mm). However, the difference caused by the gap could be reduced by considering the distance when the MCG parameters were calculated. The study results can be used as a useful reference to design the baseline and the sensor location.

• 한국전자파학회논문지
• /
• 제19권6호
• /
• pp.640-646
• /
• 2008

밀리미터파 대역에서 동작하는 컬러게이트 혼 안테나의 설계법을 나타낸다. 컬러게이트 혼 설계에 있어서 가장 중요한 하이브리드 조건을 계산한다. 본 논문에서는 파장이 짧은 밀리미터파에서 평형 하이브리드 모드의 변환과 제작이 가능한 크기의 컬러게이트 프로파일을 구한다. 모드 이론을 적용하여 혼 내부 및 컬러게이트 내 전자계를 유도한다. 혼의 전파 특성은 모드 임피던스 정합과 경계 조건으로부터 계산하고, 혼 개구면 전자계로부터 Kirchhoff-Hyugen 원리를 적용하여 방사 전자계를 구한다. $85{\sim}115GHz$ 대역에서 동작하는 밀리미터파 컬러게이트 혼 안테나를 설계하고, 전기 포밍 방식으로 제작한다. 측정 결과, 동작 주파수 대역에서 1.3:1 이하의 VSWR과 주파수 85, 100 및 110 GHz에서 각각 9.2, 9.16 및 9.02도의 반치각이 측정됨으로써 이론적 결과와 잘 부합되고 있음을 보인다.

• 한국통신학회논문지
• /
• 제42권2호
• /
• pp.323-330
• /
• 2017

밀리미터파 대역은 주파수가 30GHz-300GHz이고, 파장이 10mm-1mm인 EHF (Extremely High Frequency) 대역이다. 밀리미터파 대역에서는 장애물이 있는 경우 전파 감쇠가 심하기 때문에 Line-of-Sight (LoS)가 아닌 경우 신호가 잘 잡히지 않는다. 그렇기 때문에 밀리미터파 대역에서 신호 감쇠 측정을 할 경우에 측정 장비가 noise와 구별할 수 없는 신호들이 관찰된다. 이와 같이 감쇠가 심한 환경에서 신호 감쇠 data를 보면 특정한 값에서 제한을 받는 것이 관찰된다. 특정한 값에서 제한 받는 것을 그대로 두고 일반적인 Least square로 추정을 하는 경우에는 감쇠 exponent를 과소평가 할 수도 있다. 본 논문에서는 특정한 값에서 제한을 받아도 정확한 추정이 가능한 Tobit Maximum Likelihood Estimation, Heckman Two-stage Model 그리고 Truncation Regression model의 성능 비교를 하였다.

• 비파괴검사학회지
• /
• 제21권1호
• /
• pp.32-38
• /
• 2001

재료의 손상을 평가하기 위하여 초음파법에 대한 많은 연구가 진행되었고 널리 사용되고 있으나 대부분 균열의 성장 또는 두께의 감소와 같은 문제에 집중되고 있다. 본 연구에서는 2.25Cr-1Mo 강을 이용하여 반복하중에 의해 재료내부에 발생하는 미시균열을 조기에 감지하고, 피로에 의한 파괴를 미연에 방지할 수 있도록 초음파 표면파의 감쇠와 속도변화를 이용하여 균열길이 측정의 정량적인 평가방법을 제시하였다. 중심주파수 5MHz의 탐촉자를 이용하여 파단수명비 약 60%, 균열길이 약 2mm 정도에서 표면파의 속도 및 감쇠 변화를 탐지할 수 있었다. 고주파 탐촉자를 이용함으로써 미시균열의 발생을 조기에 탐지할 수 있으며, 파단수명을 예측하는 기초자료로 활용할 수 있다.

• Restorative Dentistry and Endodontics
• /
• 제23권1호
• /
• pp.346-356
• /
• 1998

The purpose of this study was to evaluate the sealing ability of various canal filling methods. Palatal roots of ninety extracted human maxillary molar teeth were resected at cementoenamel junction. Eighty of them were randomly assigned to four experimental groups, ten were served as positive and negative controls. All canals were prepared to # 40 using Profile. Experimental groups were obturated by lateral condensation technique, Thermafil technique, Continuous Wave of Condensation Technique, and down-pack & back-fill technique of Obtura-II, each with root canal sealer. Control groups were not obturated. Teeth were immersed in resorcinol-formaldehyde resin for 5 days at $4^{\circ}C$, and the resin was allowed to polymerize completely for 4 days at room temperature. Teeth were then ground horizontally at 1.5mm(level 1), 2.5mm(level 2), 3.5 mm(level 3) from the anatomical apex and examined with a stereomicroscope at ${\times}40$ magnification. The gap between the canal wall and the filling material, which was filled with the resin, was measured at each of the three levels. Each ratio of leakage was obtained by calculating the ratio of the area of the resin to the total area of the canal and was analyzed statistically (Rank-sum test). The results were as follows : 1. At the level 1, there was the greatest leakage in the Thermafil group and Obtura-II group, and the difference between the Obtura-II group and Continuous Wave of Condensation Technique group was statistically significant(p<0.05). 2. At the level 2, there was the least leakage in the Continuous Wave of Condensation Technique group, but there was no statistically significant difference between each group (p>0.05). 3. At the level 3, there was no statistically significant difference between each group(p>0.05).