• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -2
• /
• pp.1009-1012
• /
• 2000

In this paper, we have designed and fabricated power PHEMT’s with an unit gate width of 80$\mu\textrm{m}$ and 4 fingers, and MIMIC power amplifiers using the PHEMT’s as well. The PHEMT’s have a 0.2$\mu\textrm{m}$ gate length and source to drain spacing of 3$\mu\textrm{m}$. The characteristics of the fabricated PHEMT’s are 4.08dB of S$\sub$21/ gain at the 35GHz and 317mS/mm of gm, and 62GHz of f$\sub$T/ and 120GHz of f$\sub$max/. The designed and fabricated MIMIC’s power amplifiers with 6 PHEMT’s and MIN capacitors were fully passivated by 1000 Α of Si$_3$N$_4$ film for higher performance and surface protects. The chips were processed using the MINT processes, and size was 3.25 ${\times}$ 1.8$\textrm{mm}^2$. The fabricated MIMIC power amplifiers have RF characteristics such as 11.25dB of S$\sub$21/ gain, 11.37dB of input return-loss and 12.69dB of output return-loss at the 34.55GHz.

• 비파괴검사학회지
• /
• 제36권1호
• /
• pp.9-17
• /
• 2016

The elastic modulus of a 3D-printed Kelvin foam plate is investigated by measuring the acoustic wave velocity of 1 MHz ultrasound. An isotropic tetrakaidecahedron foam with 3 mm unit cell is designed and printed layer upon layer to fabricate a Kelvin foam plate of 14 mm thickness with a 3D CAD/printer using ABS plastic. The Kelvin foam plate is completely filled with paraffin wax for impedance matching, so that the acoustic wave may propagate through the porous foam plate. The acoustic wave velocity of the foam plate is measured using the time-of-flight (TOF) method and is used to calculate the elastic modulus of the Kelvin foam plate based on acousto-elasticity. Finite element method (FEM) and micromechanics is applied to the Kelvin foam plate to calculate the theoretical elastic modulus using a non-isotropic tetrakaidecahedron model. The predicted elastic modulus of the Kelvin foam plate from FEM and micromechanics model is similar, which is only 3-4% of the bulk material. The experimental value of the elastic modulus from the ultrasonic method is approximately twice as that of the numerical and theoretical methods because of the flexural deformation of the cell edges neglected in the ultrasonic method.

• Current Optics and Photonics
• /
• 제2권2호
• /
• pp.179-184
• /
• 2018

Terahertz (THz) wave generation by periodically poled $BaTiO_3$ (PPBT) with a quasi-phase-matching (QPM) scheme based on cascaded difference-frequency generation (DFG) is theoretically analyzed. The cascaded DFG processes comprise cascaded Stokes and anti-Stokes processes. The calculated results indicate that the cascaded Stokes processes are stronger than the cascaded anti-Stokes processes. Compared to a noncascaded Stokes process, THz intensities from $20^{th}$-order cascaded Stokes processes increase by a factor of 30. THz waves with a maximum intensity of $0.37MW/mm^2$ can be generated by $20^{th}$-order cascaded DFG processes when the optical intensity is $10MW/mm^2$, corresponding to a quantum conversion efficiency of 1033%. The high quantum conversion efficiency of 1033% exceeds the Manley-Rowe limit, which indicates that PPBT is an excellent crystal for THz wave generation via cascaded DFG.

• Journal of the Korean Wood Science and Technology
• /
• 제31권3호
• /
• pp.35-41
• /
• 2003

The mechanical and physical properties of wood are strongly dependent upon the slope of grain. Specially, tensile strength is more severely affected by the slope of grain. Therefore, tension tests were performed on small thin wood samples made from Pinus radiata with varying the slope of grain. Determining the tensile strength for clear thin wood samples the other variabilities associated with material, size, drying, defects, etc were discarded. Slope of grain was measured by the slope of grain indicator and actual slope of grain was also determined by a protractor. Correlation coefficients between machine measured and actual slope of grain for 40 pieces of 2×20 mm, 300 mm long Pinus radiata were 0.84 for wide face measurement. Results also showed that tensile strength and MOE from stress wave tests decreased with increasing the slope of grain. This study did not establish a relationships for tensile strength and MOE from stress wave with slope of grain. However, the trends of MOEs from stress wave test with both slope of grain are agreed well with Hankinson's equation. Predicted tension strength curve by Hankinson's equation was also agreed well with the experimental data over the range from 0 to 13 degrees for slope of grain.

• 한국전자파학회논문지
• /
• 제18권11호
• /
• pp.1224-1230
• /
• 2007

최근, 실내 무선 LAN은 편리함과 용도의 다양성으로 인해 가정이나 사무실 등에서 사용이 증대되고 있으며, IEEE 802.11a와 IEEE 802.11b에 명시되어 있는 바와 같이 5.2 GHz와 2.4 GHz의 주파수 대역을 사용하고 있다. 그러나 실내 공간에서 무선 LAN 기기들을 사용할 경우, 벽 천정 바닥 책상 등에 의해서 반사파가 발생하고, 이들 반사파의 다중 반사는 통신 속도 저하와 데이터 손실과 같은 문제점을 발생시킨다. 이러한 문제점은 전파 흡수체를 사용하여 해결하는 것이 가장 효과적이다. 따라서 본 논문에서는 MnZn-ferrite, sendust, carbon을 이용하여 전파 흡수체를 제작하였으며, 지지 재로는 CPE(Chlorinated Polyethylene)를 이용하였다. 제작된 전파 흡수체 측정 결과, 조성비가 MnZn-ferrite : sendust : CPE=64 : 16 : 20 wt.%일 때, 두께가 3.7 mm인 전파 흡수체가 2.4 GHz에서 17 dB의 전파 흡수 특성을 보였고, 조성비가 MnZn-ferrite : carbon : CPE=40 : 15 : 45 wt.%일 때, 두께가 3.8 mm인 전파 흡수체가 5.2 GHz에서 23 dB의 전파 흡수 특성을 보였다.

• 고신대학교 의과대학 학술지
• /
• 제33권3호
• /
• pp.328-336
• /
• 2018

Objectives: Electrocardiograhy (ECG) is the first step in hypertrophic cardiomyopathy (HCMP) diagnosis. For various reasons, the T wave inversion (TWI) and ECG change with time and HCMP is not easy to diagnosis. The aim of this retrospective study was to investigate the association between TWI on ECG and apical HCMP. Methods: A total of 4,730 ECGs presenting TWI from January 2011 to March 2013 in Pusan National University Hospital were enrolled. 133 patients who were examined by both echocardiography and coronary angiogram were analyzed. Patients were divided into two groups: Group A (TWI ${\geq}$ 10 mm) and Group B (5 mm ${\leq}$ TWI < 10 mm). HCMP is defined by a wall thickness ${\geq}15mm$ in one or more LV myocardial segments. Apical HCMP is defined to be hypertrophy that is confined to LV apex. The patients who had ECGs with at least one month interval were divided 3 groups: Normal T wave, Abnormal T wave, and Persistent TWI. The prevalence of Apical HCMP and coronary artery disease (CAD) was reviewed among the three groups. Results: In this study there were a total 133 patients, with patients divided into Group A which had 15 patients and Group B which had 118 patients. Among the 23 patients with apical HCMP, three patients were Group A and twenty patients were Group B (P = 0.769). Regarding constancy of TWI, persistent TWI group was higher in apical HCMP than in other groups (P = 0.038). CAD had no difference between groups (P = 0.889). Conclusions: T wave negativity was not associated with incidence of apical HCMP. However, apical HCMP was diagnosed more frequently in patients with persistent TWI. Further follow up echocardiographic study is needed to evaluate the progression of apical HCMP in patients with TWI.

• 한국통신학회논문지
• /
• 제22권8호
• /
• pp.1733-1739
• /
• 1997

An ultra-compact milimeter-wave broadband MMIC amplifier was designed using a direct-coupled topology combined with optimum feedback design. Significant reductionin the chip size was possible by employing the direct-coupled topology. Bias resistors required for the direct-coupled topology were also used as feedback elements. Feedback was optimized for millimeter-wave frequencies using reactive elements. The fabricated MMIC amplifier was realized in a chip size of 0.8mm$^{[-992]}$ and showed gains higher than 8 dB from 12 to 44 GHz. An output power of 30mW was achieved at 44 GHz with a drain efficiency of 10%.

• 한국항해항만학회지
• /
• 제35권9호
• /
• pp.717-720
• /
• 2011

In this paper, we designed and fabricated the Electromagnetic(EM) wave absorber for an Electronic Toll Collection(ETC or Hi-pass) system by using Amorphous metal powder and CPE. The material properties and the absorption properties of the samples containing 50 wt.%, 60 wt.%, 70 wt.%, and 80 wt.% of Amorphous. Moreover, the EM wave absorption abilities were simulated for the different thicknesses of the EM absorbers by adopting the measured permittivity and permeability, and then the EM wave absorber was fabricated based on the simulated design values. As a result, the EM wave absorber with the composition of Amorphous metal powder : CPE = 50 : 50 wt.% with the thickness of 2.6 mm has excellent absorption ability more than 40 dB at 5.8 GHz.

• Journal of electromagnetic engineering and science
• /
• 제8권3호
• /
• pp.110-113
• /
• 2008

In this paper, we designed and fabricated an electromagnetic(EM) wave absorber for automotive radar in cars using $TiO_2$ as a dielectric material and chlorinated polyethylene(CPE) as a binder. First of all, we confirmed that the optimum composition ratio of $TiO_2$ was about 70 wt.%. The complex relative permittivity of a sample containing $TiO_2$: CPE=70:30 wt.% was calculated from S-parameter. The EM wave absorption abilities were simulated for the EM wave absorbers of different thickness using the calculated relative permittivity, and the EM wave absorber was manufactured based on the simulated design. A comparison of simulated and measured results is in good agreement. Measurement shows that a 1.85 mm thick absorber has absorption ability higher than 20 dB in the frequency range of $76{\sim}77$ GHz for automotive radars.

• Nuclear Engineering and Technology
• /
• 제28권4호
• /
• pp.379-389
• /
• 1996

To experimentally investigate the several wave patterns for the horizontal countercurrent stratified air-water flow, a series of systematic experimental studies have been performed. The experiments are carried out in a horizontal pipe with 4m in length and 102mm in inner diameter. The oater and air superficial velocities vary from 0.0004 to 0.0204 and from 0 to 6m/s, respectively. The instantaneous water thickness is measured by parallel-wire conductance probes, and the wave field is recorded by high speed video camera. Also, to evaluate the wave effect on interfacial friction factor, the pressure drop is measured. Statistical data anal)sis is accomplished in order to obtain the fundamental wave parameters such as un amplitude, length and velocity, and spatial growth factor. By using these statistical parameters, the wave regime boundaries can be verified.