• Journal of the Korean Ceramic Society
• /
• v.42 no.11 s.282
• /
• pp.729-736
• /
• 2005

HTGR (High Temperature Gas-cooled Reactor) is spotlighted to next generation nuclear power plant for producing the clean hydrogen gas and the electricity. In this study, the spherical $UO_3$ gel particles were prepared by the external gelation process, and the characteristics of these particles were analyzed the particle shape, composition of precipitate, and thermal decomposition characteristics with the Streoscope, FT-IR, and X-ray diffractometer. Raw material of the ADUN (Acid Deficient Uranyl Nitrate) solution, which has [$NO_3$]/[U] mole ratio = 1.75, was obtained from dissolution of the $U_{3}O_{8}$ powder with concentrated $HNO_3$, and its concentration is 3.5 M-U/l. The broth solution is prepared with the ADUN, urea, PVA, and THFA solution. The droplets of the broth solution was made through a nozzle system. From this study, we obtained the following results; 1) an externel chemical gelation process is a suitable method in the spherical $UO_3$ particle production, 2) the particle shape are changed by an urea mixing time, THFA volume, and the viscosity of the broth solution, 3) the amorphous $UO_3$ particles obtained from these experiments was converted to $U_{3}O_{8}$ and then $UO_2$ by heat treatment in hydrogen atmosphere at $600^{\circ}C$.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.5
• /
• pp.65-72
• /
• 2014

In this paper, the water-based Ag nanofluids are synthesized by the chemical reduction method and their extinction coefficients are measured by an in-house developed measurement device. The Ag nanofluids are manufactured by the chemical reduction method with the mixing of silver nitrate ($AgNO_3$) and sodium borohydride ($NaBH_4$) in an aqueous solution of polyvinyl pyrrolidone (PVP). The extinction coefficients of Ag nanofluids are measured by means of the in-house developed apparatus at a wavelength of 632.8nm according to the particle volume fractions. The results show that the extinction coefficient of water-based Ag nanofluids increases with the increase of nanoparticle concentrations. Finally, the temperature field and efficiency of direct absorption solar collector (DASC) are analytically estimated based on the measured extinction coefficient of water-based Ag nanofluids. The results indicate that the direct absorption solar collectors using nanofluids have the feasibility to improve the efficiency of conventional flat-plate solar collectors without using an absorber plate.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1053-1058
• /
• 2008

Porous medium was considered in the present study for the heat transfer enhancement. This was attributed to its high surface area to volume ratio as well as intensive flow mixing by tortuous flow passages. But when the air or water flow through in the porous medium, it is occurred the pressure drop between inlet and outlet. So in the present study investigated simulation result about the pressure drop in the porous medium before apply to heat exchanger. In this simulation, the thickness of the solid inside the porous medium region was varied 0.2 mm to 0.4 mm. And then the simulation result were compared the pressure drop in the same unit cell ($0.5\;mm{\times}0.5\;mm{\times}0.5\;mm$). To make the analysis model, it was assumed the 14-sided tetrakaidecahedron cell which has long been considered the optimal packing cell first proposed by the Lord Kelvin in 1887. And then the simulation is carried out using by STAR-CCM+ which is commercial software. The simulation result can be showed quantified pressure drop by solid effect in the porous medium.

• Safety and Health at Work
• /
• v.11 no.1
• /
• pp.109-117
• /
• 2020

Background: Ammonia and hydrogen sulfide are harmful gases generated during aerobic/anaerobic bacterial decomposition of livestock manure. We evaluated ammonia and hydrogen sulfide concentrations generated from workplaces at livestock farms and determined environmental factors influencing the gas concentrations. Methods: Five commercial swine farms and five poultry farms were selected for monitoring. Real-time monitors were used to measure the ammonia and hydrogen sulfide concentrations and environmental conditions during the manure-handling processes. Monitoring was conducted in the manure storage facility and composting facility. Information on the farm conditions was also collected through interview and walk-through survey. Results: The ammonia concentrations were significantly higher at the swine composting facilities (9.5-43.2 ppm) than at other manure-handling facilities at the swine and poultry farms, and high concentrations of hydrogen sulfide were identified during the manure agitation and mixing process at the swine manure storage facilities (6.9-19.5 ppm). At the poultry manure-handling facilities, the ammonia concentration was higher during the manure-handling processes (2.6-57.9 ppm), and very low hydrogen sulfide concentrations (0-3.4 ppm) were detected. The air temperature and relative humidity, volume of the facility, duration of manure storage, and the number of animals influenced the gas concentrations. Conclusion: A high level of hazardous gases was generated during manure handling, and some levels increased up to risk levels that can threaten workers' health and safety. Some of the farm operational factors were also found to influence the gas levels. By controlling and improving these factors, it would be possible to protect workers' safety and health from occupational risks.

• Korean journal of food and cookery science
• /
• v.33 no.1
• /
• pp.94-103
• /
• 2017

Purpose: This study developed sourdough bread according to consumers' preferencesby shortening the sourdough fermentation process time through addition of makgeolli to sourdough. Methods: Fermentation time was measured by adding makgeolli and water to wheat flour. Results: Fermentation time was shorter than that of starter made with only water and flour, with 5 hours of primary fermentation and 3 hours of secondary fermentation. The optimum mixing ratio was 400 g of flour, 192 mL of water, and 48 mL of makgeolli. An increase in makgeolli sourdough content decreased crude protein and moisture contents of white bread. Crude fat and ash contents increased, and volume of bread was decreased as sourdough increased. The height of bread prepared with makgeolli sourdough was lower than that of bread without makgeolli sourdough. According to the results of the texture measurement, hardness, gumminess, and chewiness of sourdough group were lower as the addition of sourdough increased. Addition of makgeolli sourdough to white bread resulted in decreased lightness, but increased yellowness of white bread. Preparation of white bread with addition of sourdough improved taste and flavor compared to bread prepared only with wheat flour. Conclusion: The highest sensory preference was observed for white bread prepared whit 5 g of sourdough.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.6
• /
• pp.60-65
• /
• 2004

Numerical simulations and experiments have been carried out to investigate the effect of fuel injection nozzles on the combustion and NOx formation processes in a medium-speed marine diesel engine. Spray visualization experiment was performed in the constant-volume high-pressure chamber to verify the numerical results on the spray characteristics such as spray angle and spray tip penetration. Time-resolved spray behaviors were captured by high-speed digital camera and analyzed to extract the information on the spray parameters. Spray and combustion phenomena were examined numerically using FIRE code. Wave breakup and Zeldovich models were adopted to describe the atomization characteristics and NOx formation processes. Numerical results were verified with experimental data such as cylinder pressure, heat release rate and NOx emission. Finally, the effects of fuel injection nozzles on the engine performance were investigated numerically to find the optimum nozzle parameters such as fuel injection angle, nozzle hole diameter and number of nozzle holes. From this study, the optimum fuel injection nozzle (nozzle hole diameter, 0.32 mm, number of nozzle holes, 8 and fuel injection angle, $148^{\circ}$) was selected to reduce both the fuel consumption and NOx emission. The reason for this selection could be explained from the highest fuel-air mixing in the early phase of injection due to the longest spray tip penetration and the highest heat release rate after $19^{\circ}$ ATDC due to the increased injection duration.

• Microbiology and Biotechnology Letters
• /
• v.19 no.5
• /
• pp.444-449
• /
• 1991

Synthesis of maltosyl-$\beta$-cyclodextrin using maltose ($G_2$) and $\beta$-cyclodextrin ($\beta$-CD) as substrates through the reverse reaction of pullulanase was investigated. The optimal conditions for the condensation reaction were as below: mixing ratio of maltose to $\beta$-CD of 12.7, mixed substrate concentration of 70% (w/w, 70 g/100 ml $H_2O$), and amount of pullulanse of 350 units/100 ml. The concentration of synthesized maltosyl-P-CD concentration was reached up to 2.31 g/100 rnl at above reaction conditions, which corresponded the conversion yield of 43% (w/w, g of branched-CD/g of CD). The synthesis of maltosyl-$\alpha >\gamma >\beta$-CD was also attempted, and conversion yield was in the order of a>y>J3-CDs. Condensation reaction between various maltooligosaccharides ($G-1\sim G_6$ showed that maltose was the most effective oligorner for condensation reaction with $\beta$-CD. To increase the conversion yield various alcohols were added into the reaction mixture, amyl alcohol was found to be the most acceptable alcohol for increasement of convesion yield which increased from 43.0 to 83.0% upon addition of same volume of amyl alcohol into the reaction mixture.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.4
• /
• pp.101-108
• /
• 2015

The quantities of heavy weight waste glass have been progressively increased because of the rapid industrialization and the change of quality of life. And, the most of them are not recycled. The heavy weight waste glass have been treated by illegal dumping or being buried in landfills. Meanwhile, in order to ensure the safety of nuclear power plant structure, the excellent construction materials are socially required for shielding performance. Concrete is the most widely used construction material, the huge amounts of natural resources are required to make concrete. So, it is needed to investigate the possibility of recycling of heavy weight waste glass as concrete material ingredient. In this study, the heavy weight waste glass was evaluated for the applicability as fine aggregate of shielding concrete. From the results, when heavy weight waste glass was replaced as fine aggregate of mortar, shielding performance can be improved due to increasing in unit weight of mortar. It showed that the strength decreased according to mixing of heavy weight waste glass, Non-Washed heavy weight waste glass is more advantageous in the strength development than Washed case.

• Korean Journal of Food Science and Technology
• /
• v.8 no.4
• /
• pp.236-241
• /
• 1976

A barley (20-30%)-wheat (80-70%) flour gave generally acceptable noodle-making characteristics, in which naked barley flour showed somewhat better results than covered barley flour. And also for over 40% barley flour in the barley-wheat flour, the addition of xanthan gum improved the noodle-making characteristics. A naked barley-defatted soy flour could make dried noodles with only high NSI (Nitrogen Solubility Index) defatted soy flour, however this mixture was not considered to be feasible for noodle-making. In cooking characteristics of barley-wheat flour noodles, naked barley flour was more acceptable than covered barley flour and xanthan gum influenced the water absorption and volume expansion of noodles during cooking. The firmness, cohesiveness and gumminess in cooked noodles made of the barley-wheat flour increased and then decreased as the amounts of barley increased. The mixing of defatted soy flour (high NSI) to naked barley flour increased the firmness and gumminess of cooked noodles.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.28 no.2
• /
• pp.81-88
• /
• 2016

There are many types of national and international standards for low temperature tests depending on the products. This study conducted CFD analysis and estimation of the energy efficiency of the chamber both with and without a test object by considering variations of COP and specific volume according to temperature. The supply air was located in the upper area to compare the cooling performance for each location using various outlets in mixed ventilated conditions. For cases without the test object, the air temperature of the upper supply and center extract on the opposite side type chamber cooled faster than other areas by 4.3~29.8%. However, for cases with the test object, the object temperature of the upper supply and lower extract type chamber cooled faster than the other areas by 7.2~31.5%. The cooling efficiency of the air inside the chamber and the test object did not show the same pattern, which indicates the need to consider the cooling performance by not only the air but also the test object in the cryogenic chamber design for testing.