• 한국추진공학회지
• /
• 제25권2호
• /
• pp.1-11
• /
• 2021

연소기 내부의 공동은 낮은 속도의 재순환영역과 유동의 진동을 일으켜 연료와 공기의 혼합 효율을 증대시키고, 화염을 유지함으로써 지속적인 연소를 가능하게 한다. 본 연구에서는 공동의 형상 인자에 따른 내부 유동의 특성을 실험과 2차원 전산해석을 통해 관찰하였다. 초음속 연소기 내 유동은 단순히 L/D 이외에도 다양한 공동 형상인자에 따라 크게 영향을 받는 것이 관찰되었다. 동일 L/D에서도 공동의 깊이에 따라 open과 closed 형태가 나타남을 확인하였고, 공동의 후방 경사각, 연소기 높이도 유동 특성이 달라지며, 이는 전압력 손실에 큰 영향을 미치는 것을 확인하였다.

• Tribology and Lubricants
• /
• 제39권2호
• /
• pp.72-75
• /
• 2023

Silicon carbide (SiC) is used as a substrate material for power semiconductors; however, SiC chemical mechanical polishing (CMP) requires considerable time owing to its chemical stability and high hardness. Therefore, researchers are attempting to increase the material removal rate (MRR) of SiC CMP using various methods. Mixed-abrasive CMP (MAS CMP) is one method of increasing the material removal efficiency of CMP by mixing two or more particles. The aim of this research is to study the mathematical modeling of the MRR of MAS CMP of SiC with SiO₂ and TiO₂ particles. With a total particle concentration of 32 wt, using 80-nm SiO₂ particles and 25-nm TiO₂ particles maximizes the MRR at 8 wt of the TiO₂ particle concentration. In the case of 5 nm TiO₂ particles, the MRR tends to increase with an increase in TiO₂ concentration. In the case of particle size 10-25 nm TiO₂, as the particle concentration increases, the MRR increases to a certain level and then decreases again. TiO₂ particles of 25 nm or more continuously decreased MRR as the particle concentration increased. In the model proposed in this study, the MRR of MAS CMP of SiC increases linearly with changes in pressure and relative speed, which shows the same result as the Preston's equation. These results can contribute to the future design of MAS; however, the model needs to be verified and improved in future experiments.

• 한국지반공학회논문집
• /
• 제39권11호
• /
• pp.23-31
• /
• 2023

콘크리트 궤도의 침하는 고속열차의 안전한 운행을 크게 저해할 수 있으며 복구에 상당한 비용이 소요되므로 최근 큰 문제로 대두되고 있다. 침하의 가장 큰 원인 중 하나는 터널공사의 부산물로 발생하는 암석재료를 적정한 입도분를 가진 토사 혼합 없이 하부노반 성토에 사용하기 때문으로 보고되고 있다. 본 논문에서는 암석재료로 성토된 하부노반의 부분 보강으로 인한 침하억제 효과를 수치해석으로 평가하였다. 하부노반에 일정하게 배치된 기둥 형태의 보강 영역은 상부노반에 지반아칭을 유발하게 되며 성토하중이 보강된 영역에 집중하게 되어 침하가 억제되는 효과가 있다. 유한요소해석을 통하여 보강된 영역의 크기, 강성, 간격이 하부노반의 침하억제에 미치는 효과를 평가하였으며, 해석 결과를 토대로 침하를 허용치 이내로 억제하기 위한 최소 보강 간격을 결정하는 설계 방법을 제안하였다.

• 응용통계연구
• /
• 제37권1호
• /
• pp.103-118
• /
• 2024

Horseshoe 사전분포는 희박 회귀 분석에서 가장 자주 사용되는 사전분포 중 하나이다. Horseshoe 사전분포는 탐험해야 할 모수공간이 spike and slab 사전분포보다 작다는 장점이 있으나 MCMC 단계 당 시간이 오래 걸린다는 단점이 있다. 이로 인해 horseshoe 사전분포를 고차원 데이터 분석으로 확장하는 것은 한계가 존재한다. 이러한 한계를 극복하기 위해 horseshoe 사전분포에 대한 MCMC 알고리듬들이 많이 제안되었으며, 특히 최근 Johndrow 등 (2020)은 빠른 계산을 위한 근사 알고리듬을 제안하였다. 본 논문에서는 horseshoe 사전분포에 대한 (1) 전통적인 MCMC 알고리듬, (2) 근사 알고리듬 그리고 (3) 근사 알고리듬의 변형 알고리듬의 성능을 다양한 모의실험을 통해 비교하려 한다. 성능은 계산 시간, 회귀계수 추정 및 변수선택을 중심으로 비교한다. 이때 변수선택을 위해 Li와 Pati (2017)에서 제안한 horseshoe 사전분포 기반 변수선택법을 고려한다.

• Journal of Microbiology and Biotechnology
• /
• 제34권4호
• /
• pp.969-977
• /
• 2024

Indigo is a valuable, natural blue dye that has been used for centuries in the textile industry. The large-scale commercial production of indigo relies on its extraction from plants and chemical synthesis. Studies are being conducted to develop methods for environment-friendly and sustainable production of indigo using genetically engineered microbes. Here, to enhance the yield of bioindigo from an E. coli whole-cell system containing tryptophanase (TnaA) and flavin-containing monooxygenase (FMO), we evaluated tryptophan transporters to improve the transport of aromatic compounds, such as indole and tryptophan, which are not easily soluble and passable through cell walls. Among the three transporters, Mtr, AroP, and TnaB, AroP enhanced indigo production the most. The combination of each transporter with AroP was also evaluated, and the combination of AroP and TnaB showed the best performance compared to the single transporters and two transporters. Bioindigo production was then optimized by examining the culture medium, temperature, isopropyl β-D-1-thiogalactopyranoside concentration, shaking speed (rpm), and pH. The novel strain containing aroP and tnaB plasmid with tnaA and FMO produced 8.77 mM (2.3 g/l) of bioindigo after 66 h of culture. The produced bioindigo was further recovered using a simple method and used as a watercolor dye, showing good mixing with other colors and color retention for a relatively long time. This study presents an effective strategy for enhancing indigo production using a combination of transporters.

• Design & Manufacturing
• /
• 제18권3호
• /
• pp.1-8
• /
• 2024

Macular degeneration is a disease that damages the macula, the center of the retina, and is one of the three major eye diseases along with glaucoma and diabetic retinopathy. The optic nerve and most of the photoreceptor cells are located here, and since this is where images of objects are formed, it is the most important area for vision. The main symptom of macular degeneration is the inability to clearly distinguish the shape of objects or the inability to distinguish colors and light and dark. It is also a serious eye disease that causes black spots in the center of the field of vision. However, it is difficult to distinguish it from the form of vision loss due to presbyopia, so early diagnosis is often missed. The most common treatment for macular degeneration is antibody injection therapy. This treatment requires regular injections once every 1-2 months. When receiving antibody injection therapy, the fear of having to inject directly into the eye and the cost of long-term repeated procedures are a great burden to patients. To overcome these problems, special sustained-release formulations using drug delivery systems are being developed. Since the release speed and release time of the drug can be controlled, the number of times the drug is administered can be drastically reduced. However, the implant (Ø 0.46×6.0mm), which is a sustained-release agent, is manufactured by mixing biodegradable resin (PLGA) and therapeutic agent in a ratio of 4:6, so it is very brittle and there is a high risk of implant damage during handling. In order to safely insert the implant into the eye, a transport device that can be driven with controlled force is required. Therefore, in this study, the lever operating force was measured and analyzed to determine the influence of factors according to the cross-sectional thickness and shape of the linkage produced through injection molding as well as the post-process.

• 공업화학
• /
• 제8권5호
• /
• pp.763-770
• /
• 1997

(O/W)/O 에멀젼형 액막을 이용하여 비점이 비슷한 벤젠-싸이클로헥산 혼합물을 분리하였다. 액막 제조 조건이 선택도, 회수율 및 에멀젼 액적의 크기에 주는 영향을 고찰하였으며, 다단 맥동 추출탑을 이용한 연속 추출 실험을 통하여 비정상상태와 정상상태에서의 추출거동을 검토하였다. 추출실험결과 유화 교반 속도 4000rpm, Tween 80 농도 0.4%, 내유상에 대한 막상의 부피비 0.75, 연속상에 대한 분산상의 부피비 0.5, 투과시간10 분에서 선택도 및 벤젠의 회수율이 가장 좋았다. 에멀젼 액적의 크기 분포 측정 결과, 교반속도가 커질수록 또는 분산상의 microdrop holdup이 작을수록 분산상 액적의 평균크기가 작았으며, 분산상 microdrop holdup의 영향을 고려한 modified Calabrese의 식을 적용한 결과 turbulence damping constant의 값은 2.28이었다. 연속 추출 실험 결과 탑내 교반속도 300 rpm, 맥동 횟수 2 times/sec, 연속상 유속 30ml/min, 에멀젼상 유속 12.0ml/min에서 가장 좋은 추출 효과를 얻을 수 있었다.

• Restorative Dentistry and Endodontics
• /
• 제25권3호
• /
• pp.421-434
• /
• 2000

The purpose of this study was to evaluate the influences of incorporation of zirconium-silicate on diametral tensile strength, shear bond strength to the enamel, and depth of cure of 7 experimental composites. One group contained no filler(group 1 or control group), and the other 6 composites contain 75% filler in which zirconium-silicate(Zr-Si) were 0%, 2%, 4%, 6%, 8%, 10% with reduced contents of silica filler, respectively. Both of fillers were treated with 1% silane (${\gamma}$-methacryloxypropyltrimethoxy silane). Light curable monomers were prepared by mixing Bis-GMA and TEGDMA with 3:1 ratio and adding camphoroquinone(CQ) 0.6% with tertiary amine 0.3%. Diametral tensile strengths of specimens with $3mm{\times}6mm$ were measured with Instron (No.4467, USA) with 1mm/min crosshead speed. Shear bond strengths of composites which bonded to bovine enamel etched with 37% phosphoric acid were measured at Instron Testing Machine with as same speed as in diametral tensile strengths. Depth of cure were measured by a method that composite was filled in cylinder mold, illuminated at one side. and uncured composite was removed with acetone, and the residual thickness of composite was measured. Following results were obtained ; 1. Composites containing 0%, 2%, or 4% zirconium-silicate filler(group 2, 3 and 4) showed the statistically higher diametral tensile strength than the others. (p<0.05) 2. Increase of zirconium-silicate filler contents reduced the diametral tensile strength of experimental composites. ($r^2$=0.8721, p=0.0002) 3. Increase of zirconium-silicate filler contents did not affect the shear bond strength of experimental composites. ($r^2$=0.2815, p=0.4067) 4. Increase of zirconium-silicate filler contents reduced significantly the depth of cure of experimental composites. ($r^2$=0.9700, p<0.0001) These results mean that the mechanical properties of composites could not be improved by incorporation of small amount of zirconium-silicate filler. Also, the increased contents of zirconium-silicates fillers was found to reduce the diametral tensile strength and depth of cure.

• 한국환경과학회지
• /
• 제16권10호
• /
• pp.1179-1187
• /
• 2007

This paper represents the statistical characteristics of sources and receptors for road traffic noise in apartment complex. Also we suggested that the site-specific characteristics of vertical and horizontal distributions in the complex apartment have been derived using a different analysis for evaluating levels of Leq1h by the apartment floor at a given distance from a road in terms of the flow rate, the mean speed of the traffic, and the percentage of the type vehicles in the day and night periods. As a result, the contribution orders of traffic quantity by the type of vehicles showed as followed: light vehicle>medium vehicle>heavy vehicle>motorcycle. Especially, the mixing ratio of entering the road on the heavy vehicle in the daytime was two times higher than that of in the night. The speed in all types of vehicle is in the range of 41 and 81 km/hr and noise level was not significantly different in day and night-time. The sources of road traffic noise had different variations and uncertainties using a random variable and probability distribution. The sound distribution to receptors by the apartment floor showed S curve between 1st floor and $15^{th}$ floor With the normality test, the normal distributions using Anderson-Darling Test followed $1^{st},\;3^{th},\;13^{th}$ and $15^{th}$, floor in the daytime and all floors except $7^{th}$ floor in the night (p>0.05). And also, the value of the pearson correlation coefficient (r) obtained in this study have significantly different at the range of floor. In conclusion, the results suggested that the distribution characteristics of levels of $Leq_{1h}$ on the sources and receptors of road traffic noise in apartment complex must be improved and developed on the guideline of regulation of road traffic noise.

• 공업화학
• /
• 제30권5호
• /
• pp.606-614
• /
• 2019

본 연구에서는 palm oil과 서로 다른 HLB (hydrophile-lipophilie balance) value를 갖는 Tween-Span계 비이온성 계면활성제를 혼합하여 O/W (oil in water) 유화액을 제조하고, 유화액의 유화안정성을 향상시키기 위한 최적 유화조건을 결정하였다. 이를 위해 CCD-RSM (central composite design model-response surface methodology)을 이용하여 각 계량인자의 주효과 및 교호효과를 해석하였으며, 두 가지 반응치를 동시에 만족하는 최적조건을 결정하였다. CCD-RSM의 계량인자로는 유화시간, 유화속도, HLB value, 계면활성제의 첨가량 등을 설정하고, 반응치로는 O/W 유화액의 점도와 평균액적크기를 설정하였다. CCD-RSM 최적화 분석결과 반응치인 O/W 유화액이 점도와 평균액적크기의 목표치를 동시에 부합하는 최적조건은 유화시간(12.7 min), 유화속도(5,551 rpm), HLB value (8.0), 계면활성제의 첨가량(5.7 wt.%)으로 산출되었으며, 이 조건에서의 CCD-RSM 예측결과는 점도(1,551 cP)와 평균액적크기(432 nm)이었다. 이 조건의 실제 실험 결과 오차율은 2.5% 이하로 나타나 O/W 유화액 제조과정에 CCD-RSM 최적화 분석을 적용할 경우 비교적 높은 유의수준의 만족하는 결과를 얻을 수 있었다.