• 한국식품조리과학회지
• /
• 제12권2호
• /
• pp.146-152
• /
• 1996

1. 호박죽의 최적 배합비율, 호박죽 제조시 호박:물:찹쌀가루:팥:강낭콩:소금:설탕의 최적 재료배합 비율은 호박 400g, 물 600cc, 찹쌀가루 40g, 팥 30g, 강낭콩 30g, 소금 4g, 설탕 10g 이었다.

• 자원리싸이클링
• /
• 제30권1호
• /
• pp.53-59
• /
• 2021

생활계에서 발생되는 폐비닐은 토사, 금속, 유리 등의 이물질로 인해 고형연료(SRF, Solid Refuse Fuel)로 사용되었지만 최근 환경문제로 인해 고형연료의 사용량이 감소하고 있어 재활용이 필요한 실정이다. 본 연구에서는 폐비닐 재활용을 위해 우선 생활계 폐비닐로 생산된 복합 재생원료와 영농폐비닐로 생산된 PE 단일 재생원료에 대해 분석을 진행하였다. 원료 분석 결과, 폐비닐은 주로 폴리에틸렌으로 이루어져 있고 복합 재생원료는 약 2%의 회분이 잔존하고 있으며 PE 단일 재생원료의 경우는 회분이 없는 것을 확인하였다. 또한 두 재생원료의 배합비율에 따른 인장강도를 측정한 결과 열처리 온도 200 ℃, 압착 압력 30 MPa, 배합비율 3:7 (복합:PE 단일) 조건에서 인장강도가 최대 약 16 MPa임을 확인하였다. 굽힘강도는 열처리 온도 200 ℃, 압착 압력 30 MPa, 배합비율 3:7 (복합:PE 단일) 조건에서 최대 약 39 MPa임을 확인하였다. 따라서 재생원료들의 배합비율에 따른 강도 특성 변화를 확인함으로써 폐비닐의 재활용 가능성을 제시하고자 하였다.

• 보존과학회지
• /
• 제36권6호
• /
• pp.456-474
• /
• 2020

본 연구는 문화재 보수에 사용되는 소괴 소석회, 분말 소석회, 시판 소석회를 대상으로 배합비에 따른 석회 모르타르의 유동성, 응결시간 및 수축율을 비교하였다. 유동성 시험 결과, 문화재 조적용 석회 모르타르의 최적 배합수 비율은 소괴 소석회 8~10%, 분말 소석회 10~18%, 시판 소석회 17~40%의 범위로 나타났다. 응결시간과 수축율 분석 결과, 문화재수리표준품셈에 기술된 전돌벽쌓기(습식) 대비 종결시간비는 시판 소석회(0.4) < 분말 소석회(5.6) < 소괴 소석회(5.7)의 순으로, 수축율비는 소괴 소석회(1.1) < 분말 소석회(1.2) < 시판 소석회(3.0)의 순으로 나타났다. 물리·화학적 특성 분석 결과, 소석회의 입자크기가 커질수록 최적 배합수 함량은 낮아졌고 응결시간은 지연되며 수축율은 감소하였다. 이와 같은 결과는 향후 건축문화재의 수리·복원 현장에 사용되는 석회 모르타르의 초기거동과 수축특성을 예측하는데 기여할 것으로 판단된다.

• Korean Chemical Engineering Research
• /
• 제54권4호
• /
• pp.533-542
• /
• 2016

Lab-scale 기포유동층 반응기(D=0.1 m, H=1.5 m)에서 왕겨와 모래를 혼합하여 가스화를 통해 합성가스를 얻고 남은 왕겨 회재는 고부가가치 물질로 사용하기 위한 연구의 선행연구로서 왕겨/유동사/왕겨 회재(실리카)의 혼합 및 유동 특성을 규명하였다. 왕겨/유동사를 5:95, 10:90, 20:80, 30:70의 부피비로 유속 범위(0~0.63 m/s)조건으로 수행하였으며, 또한 왕겨 회재는 왕겨를 기준으로 부피비 6%로 결정하였다. 왕겨/유동사, 왕겨/유동사/왕겨 회재의 혼합실험을 통해 왕겨 부피비 0%, 5%, 10%에서는 최소유동화속도가 0.19~0.21m/s임을 확인하였고, 20%일때는 0.3m/s로 증가하였으며, 30%일때는 분리현상이 나타나 최소유동화속도가 측정 되지 않았다. 또한, 실험데이터에 따라 Brereton과 Grace의 mixing index를 이용하여 각 조건 별로 mixing index값을 도출한 결과 왕겨/유동사의 혼합은 0.8~1, 왕겨/유동사/왕겨 회재의 혼합은 0.88~1 사이임을 확인하였다. 이를 통하여 왕겨/유동사의 혼합과 왕겨/유동사/왕겨 회재 혼합의 최적 조업조건을 도출할 수 있었으며, 운전조건을 결정할 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권7호
• /
• pp.899-906
• /
• 2011

Generally, load conditions of machine or structure in fatigue destruction is occurred not under single load conditions but under mixed load conditions. However, the experiment under mixing mode is insufficient because of no having test standard to the behavior of crack under mixing mode and variety of test methods, and many tests are required. In this paper measured crack direction path by created figure capture system when a experiment. Also, we studied by comparison the behavior of crack giving the change of stress ratio and inserting beach mark. Through the test under mixing mode, advancing path of crack is indicated that advancing inclined angle ${\Theta}$ (direction of specimen length) has increased depending on the increase of mixed mode impaction. It is indicated that according to the increase of mixed mode loading condition impaction under mixing mode, advancing speed of crack gets slow. Also, we found that inner crack(cross section of specimen) is progressed more rapidly than outer crack based on data through beach mark.

• KCI Concrete Journal
• /
• 제11권3호
• /
• pp.79-88
• /
• 1999

Most difficulties of inducing high fluidity on the concrete mixing design with a strength range of 210 to 240kg/$\textrm{cm}^2$ result from the segregation of aggregates due to the shortage of cementitious binders. To solve the problem, this study concentrated on finding the optimized amount of binder material which does not affect the concrete strength and is also economical. Also there were studies on the use of intermediate sized aggregates to avoid the gap-grading between coarse and fine aggregates so that the material segregation in high flowing concrete was and minimalized the fluidity and penetration capacity of the reinforcing bars was enhanced. Throughout the parametric study with respect to water/binder ratio. superplasticizer. replaceable mineral admixture, the size of coarse aggregate and mixing methods, the effect of each constituent on the characteristics of high flowing concrete could be observed. As a result or partially using stone powder or an intermediate class of aggregate (max. diameter 13mm) . it was fund that the fluidity of concrete significantly increased without material segregation and any change of compressive strengths. It was also proved in this study that proper mixing time and speed are significant factors influence the performence of high flowing concrete.

• 한국환경농학회지
• /
• 제39권1호
• /
• pp.50-57
• /
• 2020

BACKGROUND: Biochar is used in various environmental fields, such as water quality and soil restoration, and affects soil fertility and nutrient cycling. Also, when crops are grown on biochar-applied soil, their characteristics may be affected. Biochar is used especially with commercial vegetable seedlings. METHODS AND RESULTS: The objective of this study was to determine the effects of biochar content in seeding mixes on early growth of lettuce (Lactuca sativa L.), Chinese cabbage (Brassica rapa L.), and red pepper (Capsicum annuum L.). Treatments consisted of a control (0: 10, ratio of biochar to seeding mixes (w/w)), 1: 9 (biochar 10%), 3: 7 (biochar 30%), 5: 5 (biochar 50%), and 7: 3 (biochar 70%). The biochar was made from risk husk and had a C/N ratio of 104. As the mixing ratio of biochar increased, pH increased whereas EC and nitrogen content decreased. The highest phosphorus content was with the treatment of 30% biochar, while there were significant increases in the weight of lettuce seedlings and concentrations of T-N, P₂O₅, K₂O, MgO, and Na with the treatments of 30% and 50% biochar. Although the weight of Chinese cabbage seedlings increased with the treatment of 10% biochar, the increase was not statistically significant. Also, there was an increase in the weight of red pepper seedlings with the treatment of 30% biochar, but the increase was not statistically significant. With increases in the biochar mixing ratio, the K₂O concentration of red pepper seedlings increased, but the concentrations of P₂O₅, CaO, MgO, and Na decreased. It was believed that this was because of absorption inhibition by calcium-phosphate formation in the seeding mixes owing to increased pH. CONCLUSION: In conclusion, adding biochar to seeding mixes is considered to be an important mean for growing healthy vegetable seedlings. More field experiments are needed to verify the effect of biochar on vegetable crop growth over the entire growing season.

• 한국주조공학회지
• /
• 제22권1호
• /
• pp.42-48
• /
• 2002

Effects of coating treatment of metallic Cu, Ni-P film on $SiC_p$, for $SiC_p$/iron aluminide composites were studied. Porous hybrid preforms were fabricated by reactive sintering after mixing the coated $SiC_p$, Fe and Al powders. Then the final composites were manufactured by squeeze casting after pouring AC4C Al alloy melts in preforms. The change of reactive temperature, density, microstructure of the preforms and microstructure of the composites were investigated. The exprimental results were summarized as follows. The thickness of Cu and Ni-P metallic layer formed on $SiC_p$ by electroless plating method were about $0.5{\mu}m$ and coated uniformly. There was no remakable change in the ignition temperature with variation of the mixing ratio of Fe and Al powder while in the case of coated $SiC_p$ it was lower about $20^{\circ}C$ than in the non-coated $SiC_p$. The maximum reaction temperature increased with increasing Al contents, but decreased with increasing $SiC_p$ contents. Expansion ratio of preform after reactive sintering increased with amount of Cu coated $SiC_p$. In the case of Fe-70at.%Al, the expansion ratio was about 7% up to 8wt.% of $SiC_p$, addition but further addition of $SiC_p$, increased the ratio significantly. And in the case of Fe-50 and 60at.%Al, it was about 20% up to 16wt.% of $SiC_p$ addition and about 28% in 24wt.% of $SiC_p$, addition. The microstructures of compounds showed that the grains became finer as amount of $SiC_p$, and mixing ratio of iron powder increased and the shape of compounds was changed gradually from irregular to spheroidal.

• 대기
• /
• 제21권3호
• /
• pp.229-241
• /
• 2011

The continuous urbanizations by a rapid economic growth and a steady increase in population are expected to have a possible impact on meteorology in the downwind region. Long-term (1972~2007) trends of precipitation have been examined in the mid-Korean peninsula for the westerly condition only, along with the sensitivity simulations for a golden day (11 February 2009). During the long-term period, both precipitation amount (PA) and frequency (PF) in the downwind region (Chuncheon, Wonju, Hongcheon) of urban area significantly increased for the westerly and light precipitation ($PA{\leq}1mm\;d^{-1}$) cases, whereas PA and PF in the mountainous region (Daegwallyeong) decreased. The enhancement ratio of PA and PF for the downwind region vs. urban region remarkably increased, which implies a possible urbanization effect on downwind precipitation. In addition, the WRF simulation applied for one golden day demonstrates enhanced updraft and its associated convergence in the downwind area (about 60 km), leading to an increase in the cloud mixing ratio. The sensitivity experiments with the change in surface roughness demonstrates a slight increase in cloud water mixing ratio but a negligible effect on precipitation in the upwind region, whereas those with the change in heat source represents the distinctive convergence and its associated updraft in the downwind region but a decrease in liquid water, which may be attributable to the evaporation of cloud droplet by atmospheric heating induced by an increase in an anthropogenic heat. In spite of limitations in the observation-based analysis and one-day simulation, the current result could provide an evidence of the effect of urbanization on the light precipitation in the downwind region.

• 대한기계학회논문집B
• /
• 제24권1호
• /
• pp.132-142
• /
• 2000

The objective of this study is to experimentally investigate the noise propagating characteristics, the noise reduction mechanism and the performance of a slotted tube attached at the exit plane of a circular convergent nozzle. The experiment is performed through the systematic change of the jet pressure ratio and the slot length under the condition of two kinds of open area ratios, 25% and 51%. The open area ratio calculated by the tube length equivalent for the slot length is defined as the ratio of the total slot area to the surface area of a slotted tube. The experimental results for the near and far field sound, the visualization of jet structures and the static pressure distributions in the jet passing through a slotted tube are presented and explained in comparison with those for a simple tube. The propagating characteristics of supersonic jet noises from the slotted tube is closely connected with the slot length rather than the open area ratio, and its propagating pattern is similar to the simple tube. It is shown that the slotted tube has a good performance to suppress the shock-associated noise as well as the turbulent mixing noise in the range of a limited jet pressure and slot dimension. The considerable suppression of the shock‘associated noise is mainly due to the pressure relief caused by the high-speed jets passing through the slots on the tube. Both the strength of shock waves and the interval between them in a jet plume are decreased by the pressure relief. Moreover, the pressure relief is divided into the gradual and the sudden relief depending upon the open area ratio of the slotted tube. Consequently, the shock waves in a jet plume are also changed by the type of pressure relief. The gradual pressure relief caused by the slotted tube with the open area ratio 25% generates the weak oblique shock waves. On the contrary, the weak normal shock waves appear due to the sudden pressure relief caused by the slotted tube with the open area ratio 51%.