• 펄프종이기술
• /
• 제40권1호
• /
• pp.47-54
• /
• 2008

As the demands of environment protection increases, the pulp mold container is developed to substitute for EPS (expanded polystyrene) as a shock absorbing packaging material. The water-absorbing ratio and mechanical properties such as tensile strength and compressive strength of pulp mold are important factors to evaluate its shock absorbing characteristics. Influences of mixing ratios of ONP (old newspaper) and OCC (old corrugated container) on physical properties of pulp mold were investigated at various conditions of temperature and relative humidity. The optimum mixing ratio of ONP and OCC was also searched based on physical properties. The results showed that when relative humidity was increased from 60% to 90%, the water absorption ratio of pulp mold increased significantly, tensile strength decreased 20$\sim$30%, and compressive strength decreased 10$\sim$20%. In addition, the optimum mixing ratio of ONP and OCC was found to be 50%:50%.

• 한국환경복원기술학회지
• /
• 제5권6호
• /
• pp.9-13
• /
• 2002

This study has been performed to investigate the physical and mechanical characteristics of compaction, volume change and compressive strength for reinforced soil mixed with cement. And confirm the reinforcing effects with admixture such as cement. To this end, a series of compaction test and compression test was conducted for clayey soil(CL) and cement reinforced soil. In order to determine proper moisture content and mixing ratio, pilot test was carried out for soil and cement reinforced soil. And the mixing ratio of cement admixture was fixed 3%, 6%, 9% and 12% by the weight of dry soil. As the experimental results, the maximum dry unit weight(${\gamma}_{dmax}$) was increased with the mixing ratio and then shown the peak at 10% reinforced soil, but the optimum moisture content(OMC) and the volume change was decreased with the ratio increase. And the compressive strength volume change was decreased with mixing ratio increased.

• 동아시아식생활학회지
• /
• 제18권1호
• /
• pp.29-40
• /
• 2008

The primary objective of this study was to determine the optimal mixing ratio in preparing Omi-Galsu concentrate. By varying the amounts of Omija extract, mung bean juice, and sugar in the concentrate mixture, we found that pH increased with greater amounts of Omija extract and sugar. According to sensory evaluations, sugar and total free sugar contents were highest when the mixing ratio was 1:1:20%(Omija extract, mung bean juice, and sugar respectively). This ratio also presented the most attractive color and highest overall acceptability.

• International Journal of Aeronautical and Space Sciences
• /
• 제2권1호
• /
• pp.12-19
• /
• 2001

Study of turbulent mixing layers has been a popular subject from the point of view of both practical application and phenomenological importance in engineering field. Turbulent mixing layers can be applied in many fields where rapid transition to turbulence is desirable in order to prevent boundary layer separation or to enhance mixing. The ability to control mixing, structure and growth of the shear flow would obviously have a considerable impact on many engineering applications. In addition to practical applications, free shear flows are one of the simplest flows to understand the fundamental mechanism in the transition process to turbulence. After the discovery of large-scale vortical structure in free shear flows many researchers have investigated the physical mechanism of generation and dissipation processes of the vortical structure. This study investigated the role of the large-scale vortical structures in the turbulent mixing layer using LES(Large-Eddy Simulation). The result shows that the pairing interaction of the vortical structure plays an important role in the growth rate of a mixing layer. It is found that the turbulence quantities depend strongly on the velocity ratio. It is also found that the vorticity in the high-velocity-side can extract energy from the mean flow, while the vorticity in the low-velocity-side lose energy by the viscous dissipation. Finally the results suggest the guideline to obtain the desired flow by control of the velocity ratio.

• 한국해안·해양공학회논문집
• /
• 제30권5호
• /
• pp.201-206
• /
• 2018

본 연구에서는 석탄회 조립물의 혼합비율에 따른 오염 퇴적물의 간극수 수질 변화를 조사하였다. 석탄회 조립물의 혼합비율을 각각 퇴적물 체적비의 0%, 10%, 30%, 50%로 구성하여 메조코즘 실험을 수행하였다. 하계 및 동계에 퇴적물의 성상 변화를 분석한 결과에 따르면, 혼합 비율이 증가함에 따라 pH가 증가하는 것으로 나타나 석탄회 조립물은 산성화된 퇴적물을 중화시키는데 기여할 수 있을 것으로 판단된다. 인산염 및 암모니아 농도는 혼합비 30%, 50%에서 대조구 대비 유의하게 감소하였다(p < 0.05). 황화수소 농도는 혼합비 10%에서 72% 감소되었으며, 혼합비 30%, 50%에서는 황화수소가 검출되지 않았다. 퇴적물의 산소소비속도를 측정한 결과 혼합비 30%, 50%에서 산소소비속도가 가장 느린 것으로 나타났다. 본 연구를 통해 석탄회 조립물은 사용량에 비례하여 오염 퇴적물의 간극수 수질을 변화시킬 수 있는 재료임을 확인하였다. 그러나 혼합비 30%와 50% 간의 효과가 크게 다르지 않은 것으로 나타나 경제적인 측면을 고려했을 때 퇴적물 체적의 30%만큼 혼합하는 것이 적합한 것으로 결론지을 수 있다.

• 펄프종이기술
• /
• 제34권3호
• /
• pp.25-31
• /
• 2002

The purpose of this study was to analyze how the fiber properties and mixing ratio of softwood and hardwood pulp affect on roundness of printed image. Softwood pulp and hardwood pulp were refined to 400 and 600ml CSF by Valley beater and handsheets of 70 g/$m^2$ basis weight were made at different mixing ratios of hardwood and softwood pulp. The roundness, dot area, and shape of the printed dot were measured by Image Analyzer. The depths and shapes of the acridine orange penetration into paper were measured by CLSM. With higher mixing ratio of hardwood pulp, the paper showed higher air-permeability and better formation, especially at lower freeness. The roundness of the printed image became better and the dot size became smaller when the amount of hardwood pulp increased. Penetration depth of acridine orange by CLSM became greater and roundness increased to real circle when the amount of hardwood pulp increased. It was thought that higher mixing ratio of hardwood fibers resulted in efficient penetration by better formation with uniform micro-pore distribution and it increased roundness. It was thought that fiber properties and mixing ratio affected the structure of paper and the shape of the printed dot. This study showed that the measurement of depth of the liquid penetration into paper without destruction and contact was feasible. Moreover, this method showed that the shape of the liquid penetration was measurable.

• Bulletin of the Korean Chemical Society
• /
• 제29권8호
• /
• pp.1533-1538
• /
• 2008

Porphyrins generally bind DNA in two different ways with respect to the mixing ratio; monomeric binding at a low mixing ratio and outside stacking at a high mixing ratio. In the present study, CTDNA binding property of a planar structured porphyrin, 5,10,15,20-tetrakis(N-methyl-4-pyridin-4-yl-phenyl)porphyrin (referred to as B-TMPyP) was investigated using absorption, CD, LD, and $LD^r$ spectroscopies. B-TMPyP produced a bisignate CD band, even at the lowest mixing ratio, indicating that B-TMPyP may not have a monomeric binding mode. From the observations of the spectral changes to the absorption, CD, and LD spectra in mixing ratio dependent titrations, B-TMPyP seems to have a quite different stacking type compared to that for the binding of $H_2$TMPyP. Moreover, B-TMPyP produced a CD band of opposite shape in the Soret band region. A qualitative explanation for the observed optical differences is also given.

• 중소기업융합학회논문지
• /
• 제6권4호
• /
• pp.99-106
• /
• 2016

본 논문에서는 White 색상을 달성하기 위한 R, G, B 혼합비율 Type을 기반으로 상대적으로 열화된 BER성능을 달성하는 파장 대역에 Forward Error Correction (FEC) 기법을 적용하여, 전체 시스템의 BER성능을 향상 시킬 수 있는 가시광 통신 시스템을 제안한다. FEC기법으로 Low Density Parity Check (LDPC) 코드를 적용하였으며, LDPC 부호는 Shannon의 한계치에 가장 근접하는 오류정정 부호로 평가되고 있으며, 오류마루(error floor) 현상이 나타나지 않고, 완전 병렬처리가 가능하여 고속 복호가 가능한 장점을 가지고 있다. 이와 같은 시스템에서 LDPC채널 코딩을 각 파장 대역에 부분적으로 적용함으로써, 주파수 효율 감소 및 데이터 전송률 감소를 완화 할 수 있다.

• 한국농공학회논문집
• /
• 제55권3호
• /
• pp.129-140
• /
• 2013

Bottom Ash is industrial by-product from a thermoelectric power plant. An immense quantities of bottom ash have increased each year, but most of them is reclaimed in ash landfill. In this study, in order to raise recycling rate of Bottom Ash, it is suggested to cure Bottom Ash (BA) mixtures mixed with cement, lime, Fly Ash (FA), and oyster shell (OS). Mixtures of 5~20 % mixing ratio had been cured for 1, 3, 7, 14, and 28 days using sealed curing and air-dry curing method. Unconfined compressive strength test was conducted to determine strength and deformation modulus ($E_{50}$) change for mixtures as mixing ratio and curing day, water contents of mixtures were measured after test. As a result, strength and $E_{50}$ were increased as mixing ratio and curing days, but values and tendencies of them appeared in different as kind of mixture, mixing ratio, curing method, and curing days. The results showed the addition of cement, lime, Fly Ash, and oyster soil in Bottom Ash could improved strength and $E_{50}$ and enlarge its field of being used.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.119-122
• /
• 2009

The gravel compaction pile method has been used as a soft foundation improvement method because bearing capacity and discharge capacity is excellent. But the discharge capacity decreased when the clogging was generated because the clay penetrate into a void of gravel compaction pile. Accordingly, the purpose of this study is to reduce the clogging generation in gravel compaction pile constructing in the soft ground and take a step to minimize a void of gravel compaction pile. And the proper mixing ratio was determined with the large scale direct shear test performed to get strength and permeability with mixing ratio of crushed stone and sand(100:0, 90:10, 85:15, 80:20, 75:25). As a result of the test, it was showed that internal friction angle was the highest at 85:15 mixing ratio of crushed stone and sand and we can make sure a tendency of internal friction angle's decrease when the mixing ratio of crushed stone and sand passed 15%.