• 한국결정성장학회지
• /
• 제15권6호
• /
• pp.217-221
• /
• 2005

EAF 더스트-점토계 소지에서 혼합비와 열처리 온도에 따른 소지 내의 중금속 총량을 측정하여 높은 증기압을 갖는 Cd, Pb, Zn 등의 중금속 성분의 휘발량을 분석하였으며 TCLP 분석을 통해 소지 내 중금속 성분의 안정화에 대해 평가하였다. 중금속 성분의 휘발은 EAF 더스트-점토의 혼합비와 열처리 온도에 크게 영향을 받으며 점토의 혼합비가 증가할수록 휘발이 효과적으로 억제되었다. 중금속 성분의 용출은 점토의 혼합비와 열처리 온도가 증가할수록 감소하였으며 안정화 효과가 큰 것으로 나타났다. EAF 더스트 20wt%-점토 800 wt%의 혼합비를 갖는 소지의 경우 중금속의 휘발과 용출이 거의 없었으며 XRD 분석 결과에 의하면 점토의 혼합비와 열처리 온도가 증가할수록 EAF 더스트-점토계 소지의 주결정상인 $(Zn{\cdot}Fe)Fe_2O_4$상과 quartz상의 회절강도가 감소하였으며, 이는 중금속의 휘발 억제 및 안정화 기구가 점토의 $SiO_2$ 성분에 의한 유리화 과정에 의한 것임을 나타내는 것으로 보여진다.

• 대한화장품학회지
• /
• 제38권3호
• /
• pp.201-207
• /
• 2012

Oil-in-ethanol (O/E) 마이크로에멀젼을 물에 희석하여 얻은 O/W 나노에멀젼의 성질에 대하여 다른 희석 과정의 영향을 연구하였다. 물/에탄올/비이온성계면활성제/실리콘 오일 계를 모델 계로 선택하였다. 희석과정은 물(또는 마이크로에멀젼)을 마이크로에멀젼(또는 물)에 단계별로 첨가하는 방법으로 구성되었다. O/E 마이크로에멀젼을 물에 첨가하여 혼합하면 30 nm 정도의 입경을 가진 나노에멀젼을 얻을 수 있었다. 반면에 물을 O/E 마이크로에멀젼에 첨가하면 400 nm의 입경을 가진 에멀젼을 얻을 수 있다. 희석 방법이 얻어지는 에멀젼의 성질에 중요한 역할을 하였다. 시간에 따른 나노에멀젼의 입자 변화는 관찰되지 않았으나 입자가 큰 에멀젼은 시간에 따라 입경이 증가하였으며 불안정화 기작은 오스트왈드 라이퍼닝으로 추정되었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.125-130
• /
• 2001

Experimental and analytical researches have been conducted on the twin-fluid atomizers for better droplet breakup during the past decades. But, the studies on the disintegration mechanism still present a great challenge to understand the drop behavior and breakup structure. In an effort to describe the aerodynamic behavior of the sprays issuing from the internal mixing counter-swirling nozzle, the spatial distribution of axial (U) radial (V) and tangential (W) components of droplet velocities are investigated across the radial distance at several axial locations of Z=30, 50, 80, 120 and 170mm, respectively. Experiments were conducted for the liquid flow rates which was kept constant at 7.95 g/s and the air injection pressures were varied from 20 kPa to 140 kPa. Counter-swirling internal mixing nozzles manufactured at angles of $15^{\circ},\;30^{\circ},\;45^{\circ}$ and $60^{\circ}$ the central axis with axi-symmetric tangential-drilled holes was considered. The distributions of velocities and turbulence intensities are comparatively analyzed. PDPA is installed to specify spray flows, which have been conducted along the axial downstream distance from the nozzle exit. Ten thousand of sampling data was collected at each point with time limits of 30 second. 3-D automatic traversing system is used to control the exact measurement. It is observed that the sprays with all swirl angle have the maximum SMD for on air injection pressure of 20 kPa and 140 kPa with centerline, respectively. The nozzle with swirl angle of $60^{\circ}$ has vest performance.

• 대한기계학회논문집B
• /
• 제24권1호
• /
• pp.132-142
• /
• 2000

The objective of this study is to experimentally investigate the noise propagating characteristics, the noise reduction mechanism and the performance of a slotted tube attached at the exit plane of a circular convergent nozzle. The experiment is performed through the systematic change of the jet pressure ratio and the slot length under the condition of two kinds of open area ratios, 25% and 51%. The open area ratio calculated by the tube length equivalent for the slot length is defined as the ratio of the total slot area to the surface area of a slotted tube. The experimental results for the near and far field sound, the visualization of jet structures and the static pressure distributions in the jet passing through a slotted tube are presented and explained in comparison with those for a simple tube. The propagating characteristics of supersonic jet noises from the slotted tube is closely connected with the slot length rather than the open area ratio, and its propagating pattern is similar to the simple tube. It is shown that the slotted tube has a good performance to suppress the shock-associated noise as well as the turbulent mixing noise in the range of a limited jet pressure and slot dimension. The considerable suppression of the shock‘associated noise is mainly due to the pressure relief caused by the high-speed jets passing through the slots on the tube. Both the strength of shock waves and the interval between them in a jet plume are decreased by the pressure relief. Moreover, the pressure relief is divided into the gradual and the sudden relief depending upon the open area ratio of the slotted tube. Consequently, the shock waves in a jet plume are also changed by the type of pressure relief. The gradual pressure relief caused by the slotted tube with the open area ratio 25% generates the weak oblique shock waves. On the contrary, the weak normal shock waves appear due to the sudden pressure relief caused by the slotted tube with the open area ratio 51%.

• 한국세라믹학회지
• /
• 제16권4호
• /
• pp.213-224
• /
• 1979

The present work was undertaken: (1) to determine if CaO-partially stabilized $ZrO_2$ prepared by Hot Petroleum Drying Method would show better ionic conductor as an oxygen sensor in molten metals than that prepared by Oxide Wet Mixing Method and than CaO-fully stabilized $ZrO_2$, and (2) to understand the nature of conduction mechanism of CaO-partially stabilized $ZrO_2$ by a comparison of measured electrical conductivity data with theory on defect structure of pure monoclinic $ZrO_2$ and fully stabilized cubic $ZrO_2$. The DC electrical conductivity was measured by 3-probe technique and the AC electrical conductivity by 2-probe technique as a function of temperature in the range 973-1373 K and oxygen partial pressure in the range 10-1-10-25Mpa. The results of the experiments were as follows: 1. CaO-partially stabilized $ZrO_2$ prepared by Hot petroleum Drying Method showed at T=1094-1285 K and $Po_2$=10-7-10-25 MPa a nearly ionic conduction with 4 times higher conductivity than that prepared by Oxide Wet Mixing Method. 2. High-oxygen pressure conductivity tends toward a Po_2^{+1/5}-Po_2^{+1/6}$dependence. An analysis of possible defect structures suggests that CaO-partially stabilized $ZrO_2$ has an anti-Frenkel defect in which singly or doubly ionized oxygen interstitials and defect electrons predominate at T=1094-1285 K and $Po_2$=10-1-10-7MPa. 3. The activation energy for pure electron hole-conduction and ionic conduction of CaO-partially stabilized $ZrO_2$ was found to be 130 KJ/mol at T=973-1373 K, $Po_2$=2, 127 10-2 MPa(air) and 153KJ/mol at T=1094-1285 K respectively.

• 한국염색가공학회지
• /
• 제11권5호
• /
• pp.44-54
• /
• 1999

Poly(ethylene 2,6-naphthalate), PEN, is a relatively well-known polymer used for engineering purposes. Naphthalene ring provides rigidity to the polymer backbone, thus, it elevated the glass transition temperature and enhanced mechanical properties. The structure and properties of PEN affect a processing conditions severely, and the high-thermal stability have been had a poor thermal processibility. Hence, the basic mechanism of solvent drawing, is very much the same as that of thermal drawing from glassy state since both involve the inducement of segmental mobility. The former achieves the goal by use of chemical energy, and the latter does so by use of thermal energy. Generally, the sorption of the solvent by the polymer has a plasticizing effect, and leads to a lowering of the glass transition temperature, $T_g$. In this paper, the dynamic viscoelasticity behavior in liquid-drawing process of an unoriented amorphous PEN films were investigated using Rheovibron. The results are as follows ： (1) For the drawing in silicone oil, the drawing below $T_g$. had $\alpha{2}$-dispersion due to an inhomogeneous taut structure. (2) For the drawing in water, the inhomogeneous taut structure reduced by the effect of plasticization even below $T_g$. (3) For the drawing in butanol, the only aliphatic segment in PEN have some molecular mobility but the mobility of the aromatic segment having naphthalene ring is nearly impossible. (4) For the drawing in dioxane/water mixing solvent, the solvent effect is complementary each other and accordingly the entire molecular conformation have stable state. (5) For the drawing in dioxane/butanol mixing solvent, the inhomogeneity of the taut structure and the aromatic segment increase with increasing the temperature and this tendencies correspond with that of the draw ratio.

• 한국안전학회지
• /
• 제27권1호
• /
• pp.20-25
• /
• 2012

The purpose of the study is to assess the extinguishing concentration of inert gases in engine nacelle fire. The experiment was performed with a two dimensional rectangular bluff body stabilized flames, where the fuel was ejected to counter flow and co-flow against an oxidizer stream. Two inert gases, $CO_2$ and $N_2$, were used for extinguishing agent in the oxidizer and methane was used for fuel. The main experimental parameters were the direction of injecting fuel, the kinds of agent and the velocity ratio between air and fuel streams, which controlled the mixing characteristic near bluff body and the strength of recirculation zone in the downstream. The result shows the flame structure and the mode were strongly dependent with fuel/air ratio and the fuel jet direction. For both flow configurations, the extinguishing concentration of $CO_2$ was smaller than the $N_2$ because of the large heat capacity of $CO_2$. However, the concentration of inert gasesat blowout was much smaller than those in the cup burner and coflow jet diffusion flames, which implies that the extinction mechanism of bluff body stabilized flames was mainly due to the aerodynamic aspect. Compared to co-flow fuel injection, the extinguishing concentration of inert gases under counter flow configuration was lower. The effect of direction might result from the mixing characteristic and strength of recirculation zonearound a bluff body. More details should be investigated for the characteristic of recirculation zone in the wake of bluff body using the LES(Large Eddy Simulation).

• 대한기계학회논문집
• /
• 제10권6호
• /
• pp.823-829
• /
• 1986

본 연구에서는 와동의 대류속도를 H.H. Brunn의 방법과 달리 측정하였으며, 또 이를 이용하여 와동의 중심들 사이의 간격을 구하고자 한다. 이를 위하여 먼저 포텐셜코어영역(potential core region)과 혼합층영역(mixing layer region)의 경계 및 천이영역(transition region)과 난류영역(turbulent region)경계를 구하여야 한다. 각 영역들의 대체적인 구분은 Fig.1과 같다.

• 한국환경과학회지
• /
• 제27권2호
• /
• pp.109-122
• /
• 2018

This study was conducted to investigate the removal characteristics of heavy metals and sulfate ion from acid mine drainage by porous zeolite-slag ceramics (ZS ceramics) that was prepared by adding wood flour as pore-foaming agent while calcining the mixtures of natural zeolite and converter slag. The batch test showed that the removal efficiency of heavy metals by pellet-type porous ZS ceramics increased as the particle size of wood flour was decreased and as the weight mixing ratio of wood flour to ZS ceramics was increased. The optimal particle size and weight mixing ratio of wood flour were measured to be $75{\mu}m$ and 7~10%, respectively. The removal test with the porous ZS ceramics prepared in these optimal condition showed very high removal efficiencies: more than 98.4% for all heavy metals and 73.9% for sulfate ion. Relative to nonporous ZS ceramics, the increment of removal efficiency of heavy metals by porous ZS ceramics with $75{\mu}m$ and 10% wood flour was 5.8%, 60.5%, 36.9%, 87.7%, 10.3%, and 57.4% for Al, Cd, Cu, Mn, Pb, and Zn, respectively. The mechanism analysis of removal by the porous ZS ceramics suggested that the heavy metals and sulfate ion from acid mine drainage are eliminated by multiple reactions such as adsorption and/or ion exchange as well as precipitation and/or co-precipitation.

• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 1996년도 춘계학술대회
• /
• pp.254-254
• /
• 1996

Eosinophils are known to be important effector cells in pathogenesis of asthma. The elucidation of mechanism by which eosinophil survival is regulated in vivo at sites of inflammation is critical tn our understanding of asthma pathogenesis. The maintenance of these cells at site of inflammation depends upon tile balance between its tendency to undergo apoptosis and tile local eosinophil-viability enhancing activity, Qualitative and quantative phenotypic differences have been observed between bronchoalveolar lavage (BAL) and peripheral blood (PB) eosinophils (EOS). We hypothesize that BAL EOS Possess altered functional feature compared to PB EOS. BAL and PB EOS were obtained from ragweed allergic asthmatics after segmental antigen challenge (SAC) at 24 hour or one week, and purified over percoll and CDl6 negative selection. Cells were cultured in duplicate in RPMI, 15% FCS and 1% penicillin/streptomycin without exogenous cytokines. Eosinophil purity and viability was >92%. BAL. EOS viability was 69${\pm}$4.4% versus 39${\pm}$1.6% for PB EOS (p<0.005) at 48 hour time point, and this difference was maintained through day 5 (32${\pm}$7.6% vs. 3.0${\pm}$ 1.4%, p<0.05), Among BAL EOS, those harvested one week after SAC appeared to have an prolonged survival compared to those harvested at 24 hour. Coculture of BAL and PB EOS resulted in significant viability enhancement than expecteed. Direct neutralization of GM-CSF activity, not IL-3 and EL-5, markedly decreased tile survival of BAL EOS in culture, and abrogated tile viability enhancing activity of their culture supernatants in a dose dependent manner. We conclude that BAL EOS activated in vivo possess enhanced viability compared to PB EOS. Mixing and neutralization experiments suggest a role for autocrine production of GM-CSF.