• 수산해양기술연구
• /
• 제26권1호
• /
• pp.26-33
• /
• 1990

연안해역에 저밀도 Froude수의 액체를 방류할 때 인근해역에 미치는 영향을 저감하기 위해서, 중력분류의 혼합\ulcorner희석특성을 알아보았다. 연직방향방류시 밀도 Froude수가 작은 것이 분류의 퍼짐폭이 증대하여 방류수의 혼합\ulcorner희석이 활발해진다. 수평방향방류시 밀도 Froude수가 클수록 혼합\ulcorner희석효과가 증대된다. 수평방향방류가 연직수평방류보다 혼합희석효과가 뛰어나다. 수평방향방류시 다공관으로 방류하는 것이 단공관의 경우 보다 효과적이다. 이는 방류수를 분산시켜 방류함으로서 주위수와 접하는 표면적이 증대되기 때문이다.

• Macromolecular Research
• /
• 제17권6호
• /
• pp.411-416
• /
• 2009

The color stabilization of antimicrobial blends was studied by using poly(hexamethylene guanidine) phosphate (PHMG) as a highly efficient biocidal and nontoxic agent. The Taguchi method was used to determine the optimum conditions for the blending of PHMG in polypropylene (PP) matrix. To improve the yellowing phenomena, two kinds of stabilizer were used together: tetrakis[methylene(3,5-di-t-butyl-4-hydroxyhydrocinnamate)](IN1010) from phenol and tris(2,4-di-t-butylphenylphosphite) (IF168) from phosphorus. According to blend composition and mixing condition, six factors were chosen, with five levels being set for each factor. The orthogonal array was selected as the most suitable for fabricating the experimental design, L25, with 6 columns and 25 variations. The-smaller-the-better was used as an optimization criterion. The optimum conditions for these parameters were 10 phr for PHMG, 2 phr for IN1010, 1 phr for IF168, 10 min for mixing time, $210^{\circ}C$ for mixing temperature, and 30 rpm for rotation speed. Under these conditions, the yellowness index of the blend was 1.52. The processibility of the blends was investigated by Advanced Rheometric Expansion System (ARES). The blend with 0.5 w% PHMG content, diluted with PP, exhibited an antimicrobial characteristic in the shake flask method.

• 한국토양비료학회지
• /
• 제49권3호
• /
• pp.227-234
• /
• 2016

The influence of mixing on biogas production and organic material removal performance of solid state anaerobic digestion of dairy manure and sawdust bedding mixtures was evaluated using 22 L volume lab-scale digesters. After 45 days of anaerobic digestion at $37^{\circ}C$, cumulative methane yield of unmixed test unit ($73.1N{\cdot}mL/g-VS$) was almost 1.3 times of that of mixed one ($56.3N{\cdot}mL/g-VS$). The biodegradable volatile solids removal rate of unmixed test unit was 67%, which was almost 28% greater than mixed one. Our results reveal that unmixed condition is better than mixed one in terms of biogas production and organic material reduction.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제34회 춘계학술대회논문집
• /
• pp.353-356
• /
• 2010

평행 초음속-아음속 후류유동에서 혼합증대에 관한 수치적인 연구를 실험결과와의 비교를 통하여 수행하였다. 이번 연구의 첫 번째 목적은 실험에서 사용된 조건으로 정확하게 수치적으로 모사하는데 있다. Pitot 압력을 이용하여 수치계산결과와 실험치와 비교하였을 때 서로 일치된 결과를 얻었으며, 그 중에서 압축성 수정을 가미한 $k-{\omega}$ SST 난류모델의 계산결과가 가장 좋은 것으로 나타났다. 게다가 기존의 유동조건에서 공동의 위치, 배열수에 변화를 주면서 혼합특성을 비교/연구하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.320-329
• /
• 2008

The influence of thermodynamic transition associated with transcritical nitrogen injection upon the flow structure was investigated to explore numerical simulation of the injectant dynamics of oxygen/hydrogen coaxial jet in liquid rocket engines. Single and coaxial nitrogen jets were treated by comparing the transcritical and perfect-gaseous conditions, wherein the numerical model was accommodative to the real-fluid thermodynamics and transport properties at supercritical pressures. The model was in the first place validated by comparing the results of transcritical nitrogen injection between calculations and available experiments. For a single jet under the transcritical condition, the nitrogen kept a relatively high density up to its pseudo-critical temperature inside the mixing layer, since it remains less expanding until heated up to its pseudo-critical temperature. Numerical analysis revealed that cryogenic jets exhibit strong dependence of specific enthalpy profile upon the associated density profile that are both dominated by turbulent thermal diffusion. In the numerical model, therefore, exact evaluation of turbulent heat fluxes becomes very important for simulating turbulent cryogenic jets under supercritical pressures. Concerning the coaxial jets due to transcritical/gaseous nitrogen injections, the density profile inside the mixing layer was again affected by the thermodynamic transition of nitrogen. However, hydrodynamic instability modes of the inner jet did not show significant differences by this thermodynamic transition, so that further study is needed for the mixing process downstream of the near injection position.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제36회 춘계학술대회논문집
• /
• pp.103-108
• /
• 2011

초임계환경에서 작동하는 케로신/액체산소 동축와류형 분사기의 혼합특성을 수치적으로 연구하였다. 케로신 물성치를 계산하기 위하여 써로게이트 모델이 적용되었다. 난류모델은 LES를 기반으로 하였고, 초임계영역의 상태량을 계산하기위해 SRK 상태방정식, 점성계수와 열전도도에 대하여 Chung이 제안한 고압상태 혼합물에 대한 방정식, 확산계수에 대하여 Fuller 이론에 Takahashi가 제안한 고압상태의 특징을 고려한 식을 적용하였다. 연소실 압력변화에 따른 분사기와 연소실에서의 열역학적 물성치와 혼합특성을 관찰하였다. 또한 분사기의 압력섭동 스펙트럼밀도를 분석하였다.

• 한국기계가공학회지
• /
• 제19권12호
• /
• pp.34-41
• /
• 2020

Ready-mixed concrete is unconsolidated concrete typically transported to construction sites by using mixer trucks. A proper rotation of concrete is necessary to prevent its solidification in mixer trucks during transport: in accordance with the manufacturing method and quality inspection prescribed in KSF4009, this movement is maintained after the manufacturing of concrete in professional production plants and the addition of water, solid materials, and admixtures. Unfortunately, mixer truck parts wear out over long periods of time. In order to improve the wear resistance of the main part of mixer trucks, we used a steel plate with good wear resistance or partially added a reinforcement plate. In this study, we first tested the properties of concrete (as required for the DEM), and then carried out mixing and discharge simulations to define the actual operating conditions of mixer trucks. For each condition, we calculated the amount and location of wear. The reliability of our results was finally verified by comparing them with the measurement values. Overall, this study provided basic data for an optimal design of mixer trucks: one that would reduce the vehicles' weight and production costs.

• Nuclear Engineering and Technology
• /
• 제56권3호
• /
• pp.1052-1065
• /
• 2024

Advanced Pressurized Water Reactors (APWRs) and Boiling Water Reactors (BWRs) employ a suppression pool as a heat sink to prevent containment overpressure. Steam can be discharged into the pool through multi-hole spargers or blowdown pipes in both normal and accident conditions. Direct Contact Condensation (DCC) creates sources of momentum and heat. The competition between these two sources determines the development of thermal stratification or mixing of the pool. Thermal stratification is of safety concern as it reduces the cooling capability compared to a completely mixed pool condition. In this work we develop a scaling approach to prediction of the thermal stratification in a water pool induced by steam injection through spargers. Experimental data obtained from large-scale pool tests conducted in the PPOOLEX and PANDA facilities, as well as simulation results obtained using validated codes are used to develop the scaling. Two injection orientations, namely radial injection through multi-hole Sparger Head (SH) and vertical injection through Load Reduction Ring (LRR), are considered. We show that the erosion rate of the cold layer can be estimated using the Richardson number. In this work, scaling laws are proposed to estimate both the (i) transient erosion velocity and (ii) the stable position of the thermocline. These scaling laws are then implemented into a 1D model to simulate the thermal behavior of the pool during steam injection through the sparger.

• 한국식생활문화학회지
• /
• 제20권4호
• /
• pp.433-437
• /
• 2005

쌀식빵의 부피는 대조구(밀가루 빵)와 RF 3 조건(쌀가루와 밀가루 혼합조건) 및 RF 1(쌀가루, 글루텐 및 변성전분 혼합조건)에서 높게 나타났다. 쌀식빵의 crust와 crumb의 색도를 색 차계를 이용하여 측정한 결과, 쌀식빵 crust의 명도 L값은 RF 5과 RF 6 조건에서 가장 높았지만, 쌀식빵 crumb의 명도 L값은 RF 1이 가장 낮았다. 쌀식빵의 경도(hardness), 탄력성 (springiness), 씹힘성(chewiness) 및 응집성(cohesiveness)등은 texture analyzer를 이용하여 측정하였다. 쌀식빵의 경도는 RF 1과 RF 2 조건이 대조구에 비해 낮았으며, 탄력성, 씹힘성은 대조구에 비해 쌀가루가 첨가된 RF 1, RF 2 와 RF 3조건에서 높은 수치를 나타냈고, 응집성은 대조구와 RF 3조건에서 낮게 나타났다. 전체적인 기호도는 쌀 고유의 향과 부드러운 조직감을 갖는 RF 1 조건 즉 쌀가루 85%, 글루텐 5% 그리고 변성전분 10% 첨가된 식빵의 선호도가 높았다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2372-2377
• /
• 2007

Characteristics of turbulent lifted flames in coflow jets with the varying initial temperature have recently been investigated about only propane case diluted by nitrogen. The investigation has firstly improved a premixed flame model and a large scale mixing model among competing theories on the stabilization mechanism of turbulent flame to be suitable for a high temperature condition. In this research, about methane with good availability to apply for a practical combustor as clean fuel, its characteristics of turbulent nonpremixed flame have been studied experimentally. The results have shown an effectiveness of the premixed flame model and the large scale mixing model considered initial temperature variation. Additionally, considering the axial distance where the mean fuel concentration falls below the stoichiometric level along the center line of the jet according to diluting nitrogen, the premixed flame model have more accurately been improved.