• Food Science and Biotechnology
• /
• 제16권6호
• /
• pp.1069-1071
• /
• 2007

The frequency independent critical concentration (Cc) of xanthan and carob (X/C) mixed gel was determined based on the Winter-Chambon's theory. X/C mixed (X/C=1:1 ratio) gels were prepared from 0.1 to 1% of concentration. The linear viscoelastic properties, i.e., storage and loss modulus, of X/C mixed gel at $20^{\circ}C$ were measured by frequency sweep tests. The frequency independence of tangent function of phase angle (tan ${\delta}$) of X/C mixed gels was graphically determined from the intersection of the plot of phase angle against concentration at varied frequencies. The intersection (C=0.43%) was considered to be Cc of X/C mixed gel.

• 해운물류연구
• /
• 제35권1호
• /
• pp.93-109
• /
• 2019

본 연구는 혼합주기모형을 해운경기 예측에 활용하기 위해 기존의 비선형 장기균형관계분석에서 통계적으로 유의한 요인들을 단기모형에 적용하였다. 가장 일반적인 단일변수(univariate) AR(1) 모형과 혼합주기모형으로부터 각각 표본외 예측을 실시하여 예측오차와 비교한 결과 혼합주기모형의 예측력이 AR(1) 모형보다 향상됨을 확인하였다. 이러한 실증분석은 새로운 고차원 혼합주기모형이 해운경기변동 예측에 유용한 모형임을 의미하며, 즉, 최근 다변수 시계열 자료가 주로 장기균형관계(long-run equilibrium)를 대상으로 하고 있는데, 고차주기와 같은 정보를 분석에 포함할 경우 단기 해운경기 분석모형의 예측력이 향상될 수 있음을 의미하는 분석결과이다.

• 응용통계연구
• /
• 제25권6호
• /
• pp.925-932
• /
• 2012

The article introduces a method to estimate a cointegrated vector autoregressive model, using mixed-frequency data, in terms of a state-space representation of the vector error correction(VECM) of the model. The method directly estimates the parameters of the model, in a state-space form of its VECM representation, using the available data in its mixed-frequency form. Then it allows one to compute in-sample smoothed estimates and out-of-sample forecasts at their high-frequency intervals using the estimated model. The method is applied to a mixed-frequency data set that consists of the quarterly real gross domestic product and three monthly coincident indicators. The result shows that the method produces accurate smoothed and forecasted estimates in comparison to a method based on single-frequency data.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권3호
• /
• pp.88-98
• /
• 2000

In this paper, a robust controller using $H_{\infty}$ control theory has been designed for the load frequency control of interconnected 2-area power system. The main advantage of the proposed $H_{\infty}$ controller is that uncertainties of power system can be included at the stage of controller design. Representation of uncertainties is modeled by multiplicative uncertainly. In the mixed sensitivity problems, disturbance attenuation and uncertainty of the system is treated simultaneously. The robust stability and the performance of model uncertainties are represented by frequency weighted transfer function. The design of load frequency controller for each area was based on state-space approach. The comparative computer simulation results for the proposed controller and the conventional techniques such as the optimal control and the PID one were analyzed at the additions of various disturbances. Their deviation magnitude of frequency and tie line power flow at each area were mainly evaluated. Also the testing results of robustness for the cases that the perturbations of the all parameters of power system were amounted to about 20% were introduced. It was approved that the resultant performances of the proposed $H_{\infty}$ controller with mixed sensitivity were more robust and stable than the one of conventional controllers.

• 한국기계가공학회지
• /
• 제14권1호
• /
• pp.78-84
• /
• 2015

The stress state acting on mechanical parts and structures is generally mixed stress. This complex stress state, which is subject to changes in the environment, will produce many. Cars running on roads with different road conditions will subject the automotive parts to combined stress state. In the x direction and the y direction, a different amplitude and frequency of the fatigue load can be present. However, the load amplitude for Mode I and Mode II in a 2-axis fatigue test is limited to a constant ratio; the load frequency is always the same for any mode. In this paper, it is verified how the variation of the load frequency for mode II affects the behavior of fatigue crack propagation under mixed mode.

• Structural Engineering and Mechanics
• /
• 제55권1호
• /
• pp.229-244
• /
• 2015

H-infinity norm relates to the maximum in the frequency response function and H-infinity control method focuses on the case that the vibration is excited at the fundamental frequency, while 2-norm relates to the output energy of systems with the input of pulses or white noises and 2-norm control method weighs the overall vibration performance of systems. The trade-off between the performance in frequency-domain and that in time-domain may be achieved by integrating two indices in the mixed vibration control method. Based on the linear fractional state space representation in the modal space for a piezoelectric flexible structure with uncertain modal parameters and un-modeled residual high-frequency modes, a mixed dynamic output feedback control design method is proposed to suppress the structural vibration. Using the linear matrix inequality (LMI) technique, the initial populations are generated by the designing of robust control laws with different H-infinity performance indices before the robust 2-norm performance index of the closed-loop system is included in the fitness function of optimization. A flexible beam structure with a piezoelectric sensor and a piezoelectric actuator are used as the subject for numerical studies. Compared with the velocity feedback control method, the numerical simulation results show the effectiveness of the proposed method.

• 한국전자통신학회논문지
• /
• 제14권5호
• /
• pp.811-816
• /
• 2019

본 논문에서는 잡음이 포함된 4채널의 음원신호를 주파수 대역의 독립벡터분석 알고리즘에 의하여 깨끗한 음성신호와 혼합잡음신호를 분리하는 기법을 먼저 제안한다. 제안한 독립벡터분석 알고리즘에 의하여 분리된 음원신호를 주파수대역 지연합 빔형성기로부터 출력되는 신호와 독립벡터분석으로부터 분리된 출력신호 간의 상호 상관성을 이용하여 향상된 출력음성신호를 구한다. 본 실험에서는 백색잡음이 포함된 0dB, -5dB의 SNR의 입력 혼합잡음음성에 대하여, 본 논문에서 제안하고 있는 알고리즘이 주파수대역 지연합 빔형성기 알고리즘만을 사용하였을 때 보다 최대 10.90dB의 SNR 및 10.02dB의 Segmental SNR이 개선되었음을 확인하였다. 따라서 본 논문의 알고리즘 기법이 주파수대역 지연합 빔형성기와 비교하여 음성품질이 향상된 것을 실험 및 고찰을 통하여 확인할 수 있었다.

• 전기학회논문지P
• /
• 제66권4호
• /
• pp.200-205
• /
• 2017

In this paper, we propose a technique to determine the normal and arc of an alternating current using a mixed filter composed of an average filter and a band-pass filter and a frequency analysis. The proposed method uses the moving average filter of the FIR filter structure for noise removal and the band-pass filter of the IIR filter structure for detecting only specific frequency components after normalizing the measured current signal based on the maximum value. After performing Fast Fourier Transform (FFT) using the band-pass filtered signal, the total energy is calculated using the magnitude component of the frequency, and the arc is detected using the magnitude of the calculated energy. In order to show the validity of the proposed method, we experimented with various data and found that arc and steady state can be easily discriminated by calculating spectral energy. Therefore, it is considered that the proposed method can be applied to arc diagnosis of low voltage electric wire.

• 한국세라믹학회지
• /
• 제48권3호
• /
• pp.205-210
• /
• 2011

The dependence of sulfur redox behavior and its diffusivity on temperature and composition was studied in mixed alkali silicate melts by means of square wave voltammetry (SWV) at different frequencies in a temperature range of $1000^{\circ}C$ to $1400^{\circ}C$. The voltammograms showed two reduction peaks at high frequency but only one peak at low frequency. Irrespective of $K_2O/(Na_2O+K_2O)$, each peak potential due to reduction of $S^{6+}$ to $S^{4+}$ and $S^{4+}$ to $S^0$ moved toward a negative direction with temperature decrease, and the peak current showed a strong dependence on frequency at a constant temperature. However, the compositional dependence of the peak potential showed an inconsistent behavior with an increase of $K_2O$. The mixed alkali effect was not observed in sulfur diffusion. This inconsistency of both peak potential and diffusion for compositional dependence may be derived from the strong volatilization of sulfur in melts.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.528-531
• /
• 2000

ZnS:Cu phosphor used on powder electroluminescent device has a green emission in low frequency and a blue emission in high frequency. In this paper, to obtain the powder electroluminescent device of the blue emission in low frequency, the emission properties with mixed the ratio between phosphor and dye was investigated. The mixed ratio of the dye was from 0 to 5 weight percent. To inquire into the blue emission, the emission spectrum, the CIE coordinate system and the brightness were measured.