• 복식
• /
• 제60권1호
• /
• pp.91-100
• /
• 2010

In the rapid development of science, technology, information, cultural industry during the 21st century, hybridity is consistently shown in which different techniques, systems, and sorts in society, industry, culture, and art are combined. The purpose of this study is to analyze the formative characteristics of hybrid make-up that is shown in the field of make-up as a practical art reflecting society and culture of a specific period, to understand the tendencies of modern make-up, and to present data for predicting changes in the future. According to the results of this study, the hybrid characteristics of make-up indicate as follows. First, hybrid make-up at a timely aspect in which senses transcending times by mixed expression of traditional classicism and modernism coexist and mingled, Characteristics of hybrid make-up at a local aspect are shown in one make-up by expressing modern tendencies that break from homogeneity, uniformity, and concentration as interests in other cultures and borrowing them in modern images. Also in modern period, characteristics of hybrid make-up at a cultural aspect are shown by mixed expression of conflicting cultural factors such as modern beauty of cutting-edge technology, female & male, and elegance & activeness in one makeup. Within the multiplex, modern social system in this period of cutting-edge technology, "tendency of hybrid design" as a social, cultural phenomenon is shown to be a complex, new designing tendency due to mixture and deconstruction of various genres. Hybrid make-up, seeking diversification and open-mindedness, is predicted to be consistently developed owing to infinite materials of design, being expected to be stronger and newer in the future.

• Tribology and Lubricants
• /
• 제31권3호
• /
• pp.125-140
• /
• 2015

In this paper, we present the results of the wear analysis of journal bearings on a stripped-down single-cylinder engine during start-up and coast-down by motoring. We calculate journal bearing wear by using a modified specific wear rate considering the fractional film defect coefficient and load-sharing ratio for the asperity portion of a mixed elastohydrodynamic lubrication (EHL) regime coupled with previously presented graphical data of experimental lifetime linear wear in radial journal bearings. Based on the calculated wear depth, we obtain a new oil film thickness for every crank angle. By examination of the oil film thickness, we determine whether the oil film thickness at the wear scar region is in a mixed lubrication regime by comparing dimensionless oil film thickness, h/σ, to 3.0 at every crank angle. We present the lift-off speed and the crank angles involved with the wear calculation for bearings #1 and #2. The dimensionless oil film thickness, h/σ, illustrates whether the lubrication region between the two surfaces is still within the bounds of the mixed lubrication regime after scarring of the surface by wear. In addition, we present in tables the asperity contact pressure, the real minimum film thickness at the wear scar region, the modified specific wear rate, and the wear angle, α, for bearings #1 & #2. To show the real shape of the oil film at wear scar region, we depict the actual oil film thickness in graphs. We also tabulated the ranges of bearing angles related with wear scar. We present the wear volume for bearings #1 and #2 after one turn-on and turn-off of the engine ignition switch for five kinds of equivalent surface roughness. We show that the accumulated wear volume after a single turn-on and turn-off of an ignition switch normally increases with increasing surface roughness, with a few exceptions.

• Journal of the Korean Wood Science and Technology
• /
• 제27권4호
• /
• pp.57-64
• /
• 1999

This research was carried out to investigate the effects of density, resin and particle types on the physical and mechanical properties of the composites made from various wood particles mixed with coating paper. The experiment was designed to apply with three particles (flake, chip, and fiber) and three resin types (urea, phenol and PMDI resin). The mixed ratio of coating paper to wood particle was fixed on 50 to 50% in each board making. And also it was designed to apply for four density levels (0.6, 0.7, 0.8 and 0.9 g/$cm^3$) and four mixed formulations of coating paper to wood particle (10:90, 20:80, 30:70, and 40:60 %) to analyze clearly the effects of PMDI resin. Coating paper-wood particle composites have acceptable bending strength (MOR, MOE) though the mixed ratio of coating paper was increased, but have low internal bond strength and poor dimensional stability (WA, TS, LE). Composites with high density had higher mechanical properties but showed lower physical properties than composites with low density. In conclusion, at least up to 20% mixed ratios, coating paper-wood particle composites have acceptable physical and mechanical properties, and PMDI resin has possibility for coating paper-wood particle composite manufacture.

• 한국염색가공학회지
• /
• 제13권2호
• /
• pp.18-18
• /
• 2001

This study has examined the removal of mixed soil of protein and fat by protease. Cotton and PET fabrics were soiled by spotting of hemoglobin and triolein, respectively. The soiling order and soil concentration were changed in this procedure. The soiled fabrics were aged at 130℃ for 20 minutes. Protease was added in the alcohol ethoxylate(AE) detergent solution. The removal effciency was evaluated by analysis of protein and/or fat on the fabrics before and after washing, respectively. The detergency of PET fabrics was higher than that of cotton fabrics. The removal efficiency of hemoglobin was improved by protease from cotton and PET fabrics. Especially the removal efficiency of hemoglobin was remarkably improved from cotton fabrics. With the increase of hemoglobin and triolein (1:1) mixed soil, the removal of mixed soil was increased in proportion to mixed soil content up to a certain point. but it began to decrease above the point from cotton fabrics, while it was generally increased from PET fabrics. The detergency of total mixed soil from cotton fabrics was higher in case of soiling order with triolein after hemoglobin than in case of soiling order with triolein before hemoglobin. But the soiling order was not greatly effected in the detergency of total mixed soil from PET fabrics.

• 한국염색가공학회지
• /
• 제13권2호
• /
• pp.104-113
• /
• 2001

This study has examined the removal of mixed soil of protein and fat by protease. Cotton and PET fabrics were soiled by spotting of hemoglobin and triolein, respectively. The soiling order and soil concentration were changed in this procedure. The soiled fabrics were aged at $130^\circ{C}$ for 20 minutes. Protease was added in the alcohol ethoxylate(AE) detergent solution. The removal effciency was evaluated by analysis of protein and/or fat on the fabrics before and after washing, respectively. The detergency of PET fabrics was higher than that of cotton fabrics. The removal efficiency of hemoglobin was improved by protease from cotton and PET fabrics. Especially the removal efficiency of hemoglobin was remarkably improved from cotton fabrics. With the increase of hemoglobin and triolein (1:1) mixed soil, the removal of mixed soil was increased in proportion to mixed soil content up to a certain point. but it began to decrease above the point from cotton fabrics, while it was generally increased from PET fabrics. The detergency of total mixed soil from cotton fabrics was higher in case of soiling order with triolein after hemoglobin than in case of soiling order with triolein before hemoglobin. But the soiling order was not greatly effected in the detergency of total mixed soil from PET fabrics.

• 토지주택연구
• /
• 제2권3호
• /
• pp.217-226
• /
• 2011

The Seoul Metropolitan Government is striving to minimize the amount of traffic according to the supply of apartment houses along with the solution of housing shortage for the low income people through high density development near the subway area. Therefore, a stronger policy is necessary to control the traffic of the passenger cars in a subway area for the successful high density development focusing on public transportation, and especially, the estimation of the demand of cars with high reliability is necessary to control the demand of parking such as the limited supply of parking lot. Accordingly, this study developed car ownership forecasting model using Look-up Table among category analyses which are easy to be applied and have high reliability. The estimation method using Look-up-Table is possible to be applied to both measurable and immeasurable types, easy to accumulate data, and features the flexible responding depending on the changes of conditions. This study established Look-up-Table model through the survey of geographical location, the scale of housing, the accessible distance to a subway station and to a bus station, the number of bus routes, and the number of car owned with data regarding 242 blocks in Seoul City as subjects.

• KSBB Journal
• /
• 제14권6호
• /
• pp.707-712
• /
• 1999

Dextransucrse와 ${\alpha}$-amylase의 혼합효소반응 통하여 새로운 구조의 올리고당을 생산하였고, 그 특성을 조사하였다. 기질인 설탕과 녹말의 농도를 10%(w/v), 5%(w/v)로 하였을 때 dextransucrase와 ${\alpha}$-amylase의 활성비가 100U대 1000U일 경우 올리고당의 종류와 생산수율이 66.4%로 가장 높았다. 녹말의 분해산물이 dextransucrase의 수용체 반응을 활성화시켜 dextransucrase 활성을 증가시켰다. 혼합효소의 활성이 증가할수록 올리고당보다는 다당을 생산하였다. 5%(w/v)의 녹말을 1시간동안 반응시켜 수용체로 이용될 수 있는 산물의 양을 증가시킨 후 설탕의 농도가 10%(w/v)가 되도록 반응시킨 방법이 녹말과 설탕을 반응초기부터 모두 반응시킨 방법보다 올리고당 생산수율이 12% 더 증가하였다. 새로운 구조의 올리고당은 pH 3에서는 10.6, pH 4에서는 7.8%의 분해를 보였다. 새로운 구조의 올리고당은 pH 6과 140$^{\circ}C$ 고온에서 89.3%까지 안정하였다.

• 정보학연구
• /
• 제4권4호
• /
• pp.51-63
• /
• 2001

잉여수계(Residue Number System)는 각 모듈러스에 자리올림수의 전달이 필요 없고, 병렬 구조를 이루므로, 디지털 신호처리 및 신경망 처리기와 같은 전용 프로세서 설계에서 사용된다. 그러나, 크기 비교 및 부호 검출시에 혼합기수변환(Mixed Radix Conversion)이 요구되며, 이는 전체 연산 속도를 저해하는 요인이 된다. 그러므로 본 논문에서는 혼합기수 변환의 속도를 향상시키기 위하여 잉여수 분할 방법을 개선한 혼합기수변환기를 설계하였다. 설계된 변환기는 기존의 변환기에 비하여 연산기의 크기는 증가하지만 연산시간은 최대 2배가 향상되었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.979-984
• /
• 2003

Quality control of ready-mixed concrete is most important in the production step because, the performance of hardened concrete is revealed due to ready-mixed concrete. Hardened concrete has several properties physically. Above all things compressive strength of concrete has a greate effect in the design of structures, analysis, and durability. Compressive strength is simple predicted by w/c up to date, but there are some limits because different compressive strengths can be revealed in the same w/c. Therefore this study contributes to the quality control of ready-mixed concrete through statistical analysis for the relation between mix factors in mix design and compressive strength, predictable equation for compressive strength.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2005년도 Proceedings of The 6th korea-china joint workshop on nuclear waste management
• /
• pp.300-315
• /
• 2005

Recently plasma surface-cleaning or surface-etching techniques have been focused in the respect of decontamination of spent or used nuclear parts and equipment. In this study decontamination rate of metallic cobalt surface was experimentally investigated via its surface etching rate with a $CF_4-O_2$ mixed gas plasma and metallic surface wastes of cobalt oxides were simulated and decontaminated with $NF_3$ - Ar mixed gas plasma. Experimental results revealed that a mixed etchant gas with about $80{\%}\;CF_4-20{\%}\;O_2$ gives the highest reaction rate of cobalt disk and the rate reaches with a negative 300 DC bias voltage up to $0.43\;{\mu}m$/min at $380^{\circ}C$ and $20{\%}\;NF_3-80\%$ Ar mixed gas gives $0.2\;{\mu}m$/min of reaction rate of cobalt oxide film.