• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.5
• /
• pp.911-920
• /
• 1989

It this study, beam-type bend specimen is used to evaluate the interlaminar fracture toughness of laminated composite under mixed-mode deformations. The specimen is loaded under three-point bending and hence produced mixed-mode deformations in the vicinity of the crack tip according to the variation of the thickness ratio on delamination plane. Total energy release rate is obtained by elementary beam theory considering the effect of shear deformation. The partitioning of total value into mode-I and mode-II components is also performed. The mixed-mode interlaminar fracture toughness is evaluated by experiments on specimens with several thickness ratios of delamination plane. As the part of delamination plane is thicker, the effect of shear deformation on total energy release rate is increased. Beam-type bend specimen men may be applied to obtain informations on the mixed-mode interlaminar fracture behavior of laminated composites.

• Journal of Chest Surgery
• /
• v.25 no.9
• /
• pp.936-942
• /
• 1992

There are three types of papillary muscle of the left ventricle[finger, tethered and mixed type] according to the morphology of the attachment to the ventricular wall. Especially finger type of the papillary muscle is more vulnerable to the injury than tethered or mixed type, because their blood supply is dependent upon the central artery whose diameter is less than 1mm and the papillary muscle itself is the end organ of the heart anatomically. There are several causes of papillary muscle rupture but few cases have been reported. Recently we have experienced 3 cases of papillary muscle rupture of the left ventricle with successful mitral valve replacement and the causes are postmyocardial infarction, percutaneous mitral valvulotomy and non-penetrating chest trauma. The common finding is the morphology of papillary muscle, that is the finger type and their rupture type is the complete type.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.3
• /
• pp.197-200
• /
• 1999

In order to get abundant germplasm for develop- ing new corn varieties, major morphological characteristics of ear were evaluated with a total of 210 Korean indigenous maize lines collected from various parts of Pusan City and Kyungnam Province, Korea. The ear shape of Korean indigenous maize was mainly cone type or similar to cone type. Cylinder type or similar to cylinder type of corn was collected from the north-west mountainous. region of Kyungnam Province, whereas cone type or similar to cone type was collected from the plain region. In the kernel colors of each ear, ears with mono colored kernels were 55.7% of the total, and ears with two to four mixed colors were 44.3%. Among the mono colored ears, brown was the most abundant at 16.8%. There was an average of 12∼14 rows per ear. Kernal rows per ear varied from 8∼20. Waxy corn was predominant at 67.2%, mixed corn with waxy kernel and common kernel at 11.0%, and common corn at 21.8%.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.10a
• /
• pp.641-646
• /
• 1997

Polymer cement mortar which is used as material for aging concrete structures is generally mixed manually and applied on the job site. but, to secure the required quality of the mortar, pre-mixed polymer cement mortar is favored. This study was initiated to four different pre-mixed polymer cement mortars which are produced in Korea. The for pre-mixed mortars were selected and tested with respect to physical and mechanical properties an proved that their qualities were better than those of common cement concrete mortars.

• Proceedings of the Safety Management and Science Conference
• /
• 2009.11a
• /
• pp.657-665
• /
• 2009

The paper reviews gauge R&R studies by two-factor mixed models including random and fixed factors. The two-factor mixed models include restricted models and unrestricted models considering the interaction of two factors. This study also classifies the models according to the number of factors, and the combination of various factors such as random factor, fixed factor, block factor and repetition type.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.6
• /
• pp.261-264
• /
• 2012

In this paper, we investigated characteristics of etching induced surface morphology variation by wet etching of GaN epilayer were grown on sapphire (0001) substrate by hydride vapor phase epitaxy (HVPE). As a results of scanning electron microscope (SEM) observation, three types of hexagonal etch pits (Edge, Screw, Mixed) were formed by the GaN epilayer thickness variations. A lot of etch pits, attributed to screw and mixed type TD, were observed at thinner epilayer, leading to high etch pit density. On the other hand, the thickness of GaN epilayer increased with the number of etch pits corresponding to edge and mixed dislocations, which are the majority of TDs are observed.

• Fashion & Textile Research Journal
• /
• v.7 no.2
• /
• pp.135-142
• /
• 2005

Through the formative analysis of the traditional jokakbo, we have composed surface composition that was made by a perfect square, triangle, a weather vane type, vertical type, cint$\tilde{a}$mani type, and a mixed rectangular. And we have composed that was made by vivid tone, pale tone, and so on, and finally analyzed image, preference rate of them. First, the cause of composition for the image of stimulant was composed by the cause of simplicity characteristics, interesting characteristics, rigid-flexibility characteristics, and modern characteristics. Secondly, the image of clothes was revealed as a simple image of perfect square, a feminine image of cint$\tilde{a}$mani type, a modern image of mixed rectangular in the case of large pattern. And in the case of small pattern, perfect square was revealed as a simple image, cint$\tilde{a}$mani type was revealed as a feminine image, triangle with achromatic colored weather vane type and pale tone was revealed as an interesting image, achromatic colored and pale toned a weather vane type, vivid toned vertical type was revealed as a modern image. Lastly, it revealed that the preference rate against clothes is related with the cause of simplicity characteristics, interesting characteristics, and rigid-flexibility characteristics in the case of large patterns, and especially in the case of large patterns and small patterns, the clothes of pale tone are more preferred. And achromatic colored mixed rectangular and chromatic colored cint$\tilde{a}$mani type are more preferred by the large patterns, and chromatic colored and pale toned weather vane type is more preferred by the small patterns.

• Journal of Aquaculture
• /
• v.7 no.3
• /
• pp.135-150
• /
• 1994

For the effective seedling production of the sweetfish, Plecoglossus altivelis, dietary value of live food in the growth and survival rate of the larvae was examined. To investigate dietary value of three types of rotifers (L-type, S-type, Us-type rotifer) for the sweetfish larvae, the larvae were fed with alone or mixed with each type and with mixtures of two or three types. Although the survival rates of the larvae fed different types of rotifers were not significantly different among them, the larvae fed a mixture of three types of rotifers showed the highest growth significantly. A feeding trial was conducted to determine the effect of the dietary values of rotifer and Artemia nauplius enriched with Chlorella ellipsoidea, $\omega-yeast$, spray-dried Spirulina platensis, and Super Selco for the sweetfish larvae. The dietary values of rotifer and Artemia nauplius enriched with Super Selco mixed with spray-dried S. platens is were distinctly improved for the survival rate and growth of the larvae. With regard to effect of the green water with Chlorella ellipsoidea, spray-dried Spirulina platensis, and the addition of photosynthetic bacteria (Rhodopseudomonas capsulatus), the green water with Spirulina platens is mixed with photosynthetic bacteria also enhanced the growth and survival rate of the larvae.

• Science of Emotion and Sensibility
• /
• v.19 no.4
• /
• pp.3-12
• /
• 2016

The aim of this study is to find the optimal combination dyeing condition for the enhancement of dye uptake and union dyeing of the composite material fabric made of triacetate and quick drying PET blended yarn. For the experiment, fabrics were one-bath combination dyed using the mixed dye of E-type disperse dye(C.I Disperse red 50) and S-type disperse dye(C.I. Disperse red 92) to measure dyed fabric's dye exhaustion, dye uptake, color and color difference according to the diverse conditions including dying temperature, time and mixed ratio of the dye. Dye equilibrium of combination dyeing occurred in $100^{\circ}C$, but by comparing dyed fabrics' K/S value and surface color, it was found that $120^{\circ}C$ was where the manifestation of color of triacetate and quick drying PET was identical. Mixed dye exhaustion and dye uptake merely changed as dyeing time increased, but color became more uniform. Therefore, it can be concluded that by using combination dyeing method, and by using the mixed dye which the mixing ratio of S-type dye and E-type dye is appropriately controlled, dye uptake can be improved compared to using single dyeing regardless of the color of E-type dye.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.9
• /
• pp.889-898
• /
• 2009

A mixed-type turbine was adopted and the rotor outer diameter was 108 mm. Turbine rotors were designed to the axial-type blade because the turbine operated at a low partial admission rate of 1.7-2.0% with two stages. Performance characteristics were studied when the spouting from the nozzle was toward radially inward or outward direction. Additionally, the effect at each stage of the rotor was measured. For comparing with each turbine performance, properties were measured based on various rotational speeds. Measured net specific torque was used to compare with the turbine system performance. On the mixed-type turbine, better performance was obtained when the operating air spouted toward radially inward direction. The specific torque was increased by 7.8% from using the second stage although its effect depended on the rotational speed.