• 제목/요약/키워드: mixed solvent

검색결과 429건 처리시간 0.028초

황산(黃酸) 침출용액(浸出溶液)에서 Cyanex272, PC88A 및 Alamine336을 이용한 바나듐(V) 및 티타늄(Ti)의 용매추출(溶媒抽出) (Solvent extraction of Vanadium and Titanium from Sulfate leaching solutions by Cyanex272, PC88A and Alamine336)

  • 안재우;안종관;김주엽;유정근;이상훈;김동진
    • 자원리싸이클링
    • /
    • 제16권3호
    • /
    • pp.34-43
    • /
    • 2007
  • 황산용액중에서 바나듐 및 티타늄의 추출거동을 고찰하기 위하여 추출제로 Cyanex272, PC88A그리고 Alamine336를 추출제로 사용하였다. 용액의 pH 및 추출제의 농도 그리고 추출등온곡선에 대한 연구와 바나듐 및 티타늄의 혼합용액에서 두성분의 분리성에 대한 연구를 실시하여 바나듐 회수를 하기 위해 효과적인 추출제를 선정하고자 하였다. 실험 결과로부터 Alamin336이 바나듐의 추출효과가 가장 좋았고, 티타늄과의 분리성도 가장 우수하였다.

염산용액에서 유기인산계 추출제에 의한 Nd와 Pr의 분리추출 (Solvent Extraction Separation of Nd and Pr from Chloride Solution using Organophosphorus Acid Extractants)

  • 박주호;전호석;이만승
    • 자원리싸이클링
    • /
    • 제23권2호
    • /
    • pp.37-45
    • /
    • 2014
  • Nd와 Pr이 함유된 모나자이트 샌드의 염산침출용액에서 Cyanex272 및 PC88A를 기반으로 한 TBP 및 Cyanex272와의 혼합용매를 사용하여 두 금속을 분리하기 위한 용매추출실험을 시행하였다. 이러한 목적을 위해 수상의 pH에 따른 추출제의 농도가 두 금속의 추출 및 분리에 미치는 영향을 조사하였다. 본 연구의 실험범위에서 Nd의 분배계수가 Pr의 분배계수보다 컸다. Cyanex272로 추출하는 경우 추출제의 농도와 초기 pH는 분배계수에 영향을 미치지 않으나, 초기 pH가 증가할수록 분리인자는 증가하였다. 혼합용매의 경우 PC88A를 단독으로 사용했을 때보다 분배계수가 낮고 분리인자에 차이가 없었다.

물과 에탄올의 혼합용매로부터 니켈 미분말의 합성 및 산화특성 (Synthesis of nickel fine powder in the mixed solvent of water and ethanol and ie oxidation behaviors)

  • 이상근;최은영;이윤복;김광호;박희찬
    • 한국결정성장학회지
    • /
    • 제13권3호
    • /
    • pp.139-144
    • /
    • 2003
  • 유기용매로서 에탄올을 함유한 염화니켈 수용액으로부터 니켈 미분말을 제조하고 이들의 산화특성을 검토하였다. 에탄올을 함유한 염화니켈 수용액에서 히드라진의 환원반응은 반응온도에 크게 의존하였다. 히드라진에 의한 환원반응시간은 반응온도가 증가함에 따라 감소하였다. 반응온도를 제어함으로써 입경이 0.1 $\mu\textrm{m}$-1.0 $\mu\textrm{m}$ 범위를 갖는 구형 분말을 얻을 수 있었다. 또한, 반응온도가 증가함에 따라 입경은 다소 증가하였고 조대한 입자들의 존재로 인하여 넓은 입도 분포를 나타내었다. $60^{\circ}C$에서 합성된 니켈 분말의 평균 입경과 비표면적은 각각 0.3 $\mu\textrm{m}$와 31.8 $m^2$/g이었다. $300^{\circ}C$에서 니켈 분말의 중량감소는 $Ni(OH)_2$의 분해반응에 기인한 것이다. $200^{\circ}C$ 공기중에서 가열처리한 경우 내산화성은 합성 분말보다 현저하였다

용매에 따른 MWNT의 분산특성과 제조된 PU/MWNT 필름의 전기적·물리적 특성 분석 (Analysis of Electrical and Physical Property of the PU/MWNT Film and Dispersion Characteristics of MWNT According to the Solvent)

  • 김정현;마혜영;양성용;김승진
    • 한국염색가공학회지
    • /
    • 제24권1호
    • /
    • pp.69-78
    • /
    • 2012
  • This paper surveys the physical properties of the MWNT dispersion solution dispersed with the three types of solvents and of the polyurethane composite film for improvement of mechanical properties and electrical characteristics of PU/MWNT composite film. For this purpose, the MWNT dispersed solution was mixed with three types of solvent such as IPA, MEK and Toluene and then mixed with polyurethane (100part) with variation of loading content (0, 10, 20, 30, 40, 50 part) of MWNT dispersed solution in the ultrasonic wave dispersion apparatus. And eighteen PU/MWNT composite films were prepared as specimens. The various physical properties of these PU/MWNT films were measured and discussed with the loading content of three types of MWNT dispersed solutions. The highest absorbancy among the three types of dispersed solutions was shown in the IPA/MWNT solution. But the absorbancy of PU/MWNT films was not same as the solution. The low electrical surface and volume resistivity of PU/MWNT film were shown at the condition of 20 and 10 parts loading of IPA/MWNT dispersed solution, respectively. The low triboelectricity of PU/MWNT film was shown at the condition of above 30part loading of IPA/MWNT dispersed solution. The breaking strength and strain of PU/MWNT film prepared with IPA/MWNT dispersed solution were decreased with increasing loading content of IPA/MWNT from 10 to 40 parts. The maximum breaking strength and breaking strain according to the dispersion solution were shown on the IPA/MWNT dispersed solution. The uniform dispersion of PU/MWNT film according to the loading content of MWNT solution was shown by surface image analysis on the films dispersed with IPA.

수용액, 에탄올-물 및 아세톤-물 혼합용매 내에서의 망간, 아연 및 코발트의 시트르산 착물 (Citrate Complexes of Manganese, Zinc and Cobalt in Aqueous, Ethanol-Water and Acetone-Water Solutions)

  • 최상업;박동환
    • 대한화학회지
    • /
    • 제14권1호
    • /
    • pp.91-96
    • /
    • 1970
  • 양 이온 교환수지와 시트르산 이온($Cit^{3-}$)이 들어 있는 용액에서 방사성 $Mn^{++},\;Zn^{++}$$Co^{++}$이 수지와 용액 사이에 어떻게 분배되는가를 실온에서 조사함으로써 이들금속 이온의 시트르산 착물 형성에 관한 연구를 하였다. 용매로서 $H_2O$, 20%에탄올-$H_2O$ 및 20% 아세톤-$H_2O$를 사용하였다. 용액의 pHsms 7.0-7.4로 조절하였고 이온 강도는 약 0.10으로 유지하였다. 본 연구의 결과 $Mn^{++}$$Zn^{++}$은 어떤 용매계에서도 1:1 시트르산 착물[M Cit]$^-$을 형성하는 것을 알았다. 한편 $Co^{++}$은 수용액에서는 1:1 착물만을 형성하지만 위에 말한 혼합용매에서는 1:1 착물 [Co Cit]$^-$과 1:2착물 $[Co\;Cit_2]^{4-}$을 형성하는 것을 알았다. 그리고 이들 시트르산 착물이 수용액에서 보다 혼합용매 내에서 더욱 안정함을 알았다.

  • PDF

Studies on Solvent Sublation of Trace Heavy Metals by Continuous Flow System as Ternary Complexes of 1,10-Phenanthroline and Thiocyanate Ion

  • Kim, Young-Sang;Choi, Yoon-Seok;Lee, Won
    • Bulletin of the Korean Chemical Society
    • /
    • 제24권12호
    • /
    • pp.1775-1780
    • /
    • 2003
  • A continuous flow system has been developed to determine trace Cu(II), Mn(II), Ni(II) and Zn(II) in a large volume of water samples by a solvent sublation technique. The mixed solution of 1,10-phenanthroline(phen) and thiocyanate ion was used as ligands for the formation of their ternary complexes. The continuous system was constructed in this laboratory with a peristaltic pump, a mini shaker, three mixing bottles and a flotation cell by connecting each part with a polyethylene tube. The flotation conditions such as the flow rate of sample solution and the injection rates of ligand, buffer and surfactant solutions have been investigated to obtain the best sublation efficiencies. Each solution flowed into the flotation cell through each polyethylene tube by the peristaltic pumps. The ternary complexes were floated and extracted into MIBK in a flotation cell of 2 L by bubbling a nitrogen gas. The absorbances of extracted analytes in MIBK were directly measured by graphite furnace-AAS. The concentrations of 1,10-phenanthroline and thiocyanate ion were $2.6\;{\times}\;10^{-3}$ M and $2.3\;{\times}\;10^{-2}$ M in the mixed solution, respectively. The pH of sample solution was adjusted to 5.0 with a buffer solution and 1%(m/v) sodium lauryl sulphate solution was added as a surfactant to support the effective flotation of the complexes. The $N_2$ gas was bubbled at 30 mL/min for 90 minutes for 20 L of sample. Reproducible results of less than 10% RSD and recoveries of 80-120% could be obtained in real samples.

염산용액(鹽酸溶液)에서 Tri 2-Ethylhexyl Amine(TEHA)에 의한 백금과 로듐의 분리(分離) (Separation of Platinum(IV) and Rhodium(III) from Acidic Chloride Solution by Solvent Extraction with Tri 2-Ethylhexyl Amine(TEHA))

  • 손반반;이만승
    • 자원리싸이클링
    • /
    • 제22권5호
    • /
    • pp.29-34
    • /
    • 2013
  • TEHA와TEHA 및TBP와 LIX63과의 혼합용매를 사용하여 염산용액으로부터 백금과 로듐을 분리하기 위한 용맥추출실험을 수행하였다. 염산농도 1-9 M 범위에서 추출제의 농도에 따른 두 금속의 추출거동과 분리 가능성을 조사하였다. 혼합용액에서 백금과 로듐의 농도는 각각 $1{\times}10^{-3}M$$2{\times}10^{-4}M$로 조절하였다. TEHA와 혼합추출제에 의한 추출시 로듐의 추출율은 추출조건에 의존하나, 백금은 염산농도와 무관하게 모두 추출되었다. 혼합용액에서 염산농도가 낮을 경우 로듐이 추출되지 않아 백금과 로듐의 분리가 가능하였다. LIX63을 첨가한 TEHA는 로듐의 추출율을 향상시켰으나, TBP를 첨가한 TEHA는 두 금속의 추출에 거의 영향을 미치지 않았다.

순수용매와 혼합용매를 이용한 상전이를 통한 Poly(L-lactide) 스캐폴드 막의 제조 (Fabrication of Poly(L-lactide) Scaffold Membranes through Phase Inversion with Pure and Mixed Solvents)

  • 김영경;조유송;구자경
    • 멤브레인
    • /
    • 제25권1호
    • /
    • pp.48-59
    • /
    • 2015
  • 순수용매와 혼합용매를 사용한 상전이를 통하여 poly(L-lactic acid) (PLLA) 스캐폴드 막을 제조하였다. 순수용매로서 chloroform과 1,4-dioxane을 사용하였으며, 이들 순수용매를 혼합하여 혼합용매를 제조하였다. 스캐폴드 막의 모폴로지, 기계적 특성 그리고, 물질전달 특성을 각각 SEM, 인장강도실험 및 당 확산실험을 통하여 측정, 평가하였다. 순수 chloroform 용매를 사용한 용액으로부터는 격벽-공극 구조(solid-wall pore structure)의 스캐폴드 막이 제조되었다. 반면, 순수 1,4-dioxane 용매를 사용한 용액으로부터는 나노섬유 구조의 스캐폴드 막이 제조되었다. 혼합용매의 경우 용매 내의 조성이 변화하면서 다양한 구조의 스캐폴드 막이 제조되었다. 혼합용매 내 1,4-dioxane 함량이 20% 이하인 경우에는 격벽-공극 구조의 스캐폴드 막이 제조되었으며, 1,4-dioxane 함량이 20%인 경우에는 최대직경 $100{\mu}m$의 거대공극을 갖는 구조를 보였다. 1,4-dioxane 함량이 25% 이상인 구간에서는 나노섬유 구조의 스캐폴드 막이 제조되었다. 이 구간에서는 혼합용매 내 1,4 dioxane 함량이 변화함에 따라 나노섬유의 직경이 함께 변화하였다. 나노섬유의 최소직경은 15 nm 가량이었으며, 혼합용매 내의 1,4-dioxane 함량이 80 wt%일 때에 얻어졌다. 이상의 결과를 통하여 용매의 조성은 스캐폴드 막의 구조를 결정짓는 중요한 요소가 된다는 결론을 얻을 수 있었다.

Extraction of β-glucosidase from Bagasse Fermented by Mixed Culture under Solid State Fermentation

  • Shata, Hoda Mohamed Abdel Halim;Farid, Mohamed Abdel Fattah
    • Journal of Applied Biological Chemistry
    • /
    • 제57권3호
    • /
    • pp.197-203
    • /
    • 2014
  • Various parameters such as solvent selection, concentration, solid/liquid ratio, soaking time, temperature, stationary, shaking conditions, and repeated extractions were investigated in order to determine the optimum extraction conditions of ${\beta}$-glucosidase from bagasse fermented by mixed culture of Aspergillus niger NRC 7A and Aspergillus oryzae NRRL 447. Among various solvents tested, non ionic detergents gave the best results than the inorganic or organic salt solutions and distilled water. The optimum conditions for extraction of ${\beta}$-glucosidase were 30 min soaking time at $40^{\circ}C$ under shaking condition at 150 rpm, with solid/liquid ratio 1:15 (w/v), which yielded $2882.74{\pm}95.52U/g$ fermented culture (g fc) of enzyme activity. With repeated washes under the above optimum conditions, the results showed that enzyme extracted in the $1^{st}$ and $2^{nd}$ washes represents about 90% of the total activity.

석탄구조의 용매팽윤시 용매간 시너지효과 (Synergistic Effects of Solvents on Coal Swelling)

  • Yongseung Yun
    • 한국에너지공학회:학술대회논문집
    • /
    • 한국에너지공학회 1995년도 춘계학술발표회 초록집
    • /
    • pp.158-162
    • /
    • 1995
  • Synergistic effects of mixed solvents, especially with mixtures of CS$_2$ with electron donor solvents, in inducing desired structural changes in coals were studied by solvent swelling techniques in addition to differential scanning calorimetric analyses. Mixed solvents exhibit significant synergistic efficacy in swelling the coal structure of medium bituminous rank. This synergy effect appears to be physical origin that is closely related to matching solubility parameters. Since the swollen coal structure can be obtained by mixed solvents with CS$_2$ at room temperature instead of high temperature, many possible technological pathways for economical utilization of coal might be sought.

  • PDF