• Journal of Industrial Technology
• /
• v.20 no.A
• /
• pp.203-209
• /
• 2000

The fluctuation integrals which give useful information in the structure of solution are associated with the mixed direct correlation integral ($C_{12}$) known. Using its weighted arithmetic mean of $C_{11}$ and $C_{22}$ and the activity coefficient model, the fluctuation integrals on solute-solute, solvent-solute, and solvent-solvent can be calculated in the function of mole fraction. In this work, several binary mixtures containing c-hexane were tested and the results on the fluctuation integrals were rather good.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10a
• /
• pp.91-91
• /
• 2003

Major factors including solvent and reaction temperature in the cationic polymerization of isobutyl vinyl ether (IBVE), photoinduced in the presence of diphenyliodonium iodide (DPII) zinc iodide in toluene/diethyl ether mixed solvent has been investigated. It was found that the living nature of the propagating species and the tacticity of the resulting polymer is significantly dependent on these factors. The addition of diethyl ether (DEE) results in not only the loss of the cationic living nature but also decrease in the isotactic content.

• Korea-Australia Rheology Journal
• /
• v.14 no.2
• /
• pp.71-76
• /
• 2002

Metal thin films, which are indispensable constituents of ULSI (Ultra Large Scale Integration) circuits, have been fabricated by physical or chemical methods. However, these methods have a drawback of using expensive high vacuum instruments. In this work, the fabrication of tungsten metal film by spin coating was investigated. First of all, inorganic peroxopolytungstic acid (W-IPA) powder, which is soluble in water, was prepared by dissolving metal tungsten in hydrogen peroxide and by evaporating residual solvent. Then, the solution of W-IPA was mixed with organic solvent, which was spin-coated on wafers. And then, tungsten metal films, were obtained after reduction procedure. By selecting an appropriate organic solvent and irradiating UV, the sheet resistance of the tungsten metal film could be remarkably reduced.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.5
• /
• pp.399-404
• /
• 1994

The non-Newtonian viscosities (the specific or intrinsic viscosities) of poly(L-proline) (PLP, $M_v$=19,000 and 32,000) in various mixed-solvent systems like water-propanol and acetic acid-propanol of varying compositions were measured during the reverse mutarotation (Form II ${\rightarrow}$Form I) by the application of external pressure (up to 4.5 psi). The non-Newtonian viscosity effect was found to be larger in acetic acid-propanol system than in water-propanol system and to somewhat decrease during the reverse mutarotation at a given solvent system. The non-Newtonian viscosity behavior of PLP in aqueous salt ($CaCl_2$) solution was also studied, from which it was found that the degree of the non-Newtonian effect decreased with increasing salt concentration, and increased with increasing PLP molecular weight. These findings could be explained in terms of conformational changes of PLP in solution (like the helix-helix or helix-coil transition) involved.

• Membrane Journal
• /
• v.18 no.4
• /
• pp.282-293
• /
• 2008

Partially sulfonated poly(aryl ether sulfone) membranes were prepared from the sulfonated sulfone monomer, which was synthesized by a nucleophilic substitution, non-sulfonated monomers and potassium carbonate by a direct polymerization method and a subsequent solution casting technique with mixed solvents of N-methyl-2-pyrrolidone (NMP) and dimethylacetamide (DMAc). To investigate the effect of mixed solvent, the volume ratios of NMP and DMAc were varied in the range of $0{\sim}100%$ and the degrees of sulfonation of the copolymers were fixed as 50%. The surface properties of the resulting membranes were examined by scanning electron microscope (SEM) and atomic force microscope (AFM), and a comparative study of the morphology changes and the physicochemical properties such as proton conductivity and methanol permeability was achieved. It was found that proton conductivities depend on the volume ratio of NMP-DMAc mixed solvents, and the proton conductivity determined at the condition of $25^{\circ}C$ and 100% relative humidity was $1.38{\times}10^{-1}\;S/cm$ for the membrane prepared in the 50:50 v/v-% of NMP : DMAc mixed solvent.

• Korean Chemical Engineering Research
• /
• v.46 no.5
• /
• pp.965-970
• /
• 2008

The separation of sulfone components using light cycle oil(LCO) after oxidation was carried out by solvent extraction method using various polar solvents such as water, n-methyl-2-pyrrolidone(NMP), dimethyl sulfoxide, ethyl acetate, acetonitrile, dimethyl formamide, and methyl alcohol. It was found that phase separation between LCO layer and solvent occurred under mixed solvent adding a proper amount of water. The mixture solvent of NMP and water was a promising extraction solvent due to the selective removal and high distribution coefficient of sulfone component in LCO. 99.5% over of sulfur contents in LCO can be removed by 4 stages equilibrium extraction.

• Textile Coloration and Finishing
• /
• v.6 no.4
• /
• pp.17-26
• /
• 1994

Poly(ethylene terephthalate)(PET) filaments were treated in binary mixtures of organic solvents such as benzyl alcohol/perchloroethylene(BA/PER), benzyl alcohol/trichloroethylene(BA/TRI), benzyl alcohol/ethylene chloride(BA/EC), methanol/perchloroethylene (ME/PER), and methanol/trichloroethylene(ME/TRI). From the equilibrium swelling of PET, total and partial isotherms of PET for sorption of solvent mixtures and isotherms for distribution of the components between the phases were taken. Also the shrinkage and the crystallinity of PET treated with binary mixtures were investigated. The results obtained were summerized as follows: 1. All isotherms for distribution of the components between the phase deviated from the diagonal in system of PET-binary mixtures. Especially in the binary mixtures of ME/PER or ME/TRI, selectivo sorption of chlorinated hydrocarbon PER and TRI by PET occured. 2. The shrinkage of PET treated in binary mixrures was increased to compare with single solvent-treated, but the composition of binary mixtures corresponding to maximum values of shrinkage was not always agreed with the composition of binary mixtures corresponding to maximum values of shrinkage was not always agreed with the composition of binary mixtures exhibiting of the maximum swelling of PET. 3. The crystallinity of PET treated in binary mixtures generally increased than that of single solvent-treated.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.13 no.1
• /
• pp.40-42
• /
• 2015

Benzoylureas are chemical compounds best known for their use as insecticides. Diflubenzuron is one of the more commonly used benzoylurea pesticides. Others include chlorfluazuron, flufenoxuron, hexaflumuron, and triflumuron. They act as insect growth regulators by inhibiting synthesis of chitin in the body of the insect. They have low toxicity in mammals because mammals have no chitin. Chlorfluazuron insecticides, which are mixed with solvent naphatha, are commonly used. Thus we assume that in the presented case mental change outcome of poisoning was connected with toxic effects of solvent naphtha rather than with chlorfluazuron action. Components of solvent naphtha, particularly trimethylbenzenes, exert strong irritant action on the gastric mucosa and are very well absorbed from the gastrointestinal tract. We report on a 67-year-old man with stuporous mentality after intentional ingestion of approximately 200 ml of liquid chlorfluazuron in a suicide attempt. He was discharged after conservative treatments including gastric irrigation, charcoal, mechanical ventilation, hydration, and antibiotics for aspiration pneumonia without complications.

• Journal of the Korean Chemical Society
• /
• v.38 no.3
• /
• pp.179-185
• /
• 1994

The Raman stretching frequency of nitrile group was affected by change of solvents and its in concentration in same solvent. In the case of acetonitrile, nitrile group stretching frequencies were observed in the region of 2247.3∼2254.9 cm-1 with various solvents. While in benzonitrile, they were found in the region of 2226.1∼2230.3$ cm^{-1}. With the addition of water in acetonitrile,νC≡N was shifted to high frequency from 2250.1 cm^{-1} in pure acetonitrile to 2257.7 cm^{-1} in 90% water forwhich had with higher volume % of water caused higher hydrogen-bonded equilibrium between methyl protons and water. The νC≡N frequency for nitrile group was shifted to high frequency by solvent inductive effect with the increasing mixed solvent (CHCl_3/CCl_4)$mole% ratio.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.10
• /
• pp.3682-3686
• /
• 2011

The electrochemical properties of lithium-sulfur batteries with binary electrolytes based on DME and DOL, TEGDME and DOL mixed solvent containing $LiClO_4$, LiTFSI, and LiTF salts were investigated. The ionic conductivity of 1M LiTFSI and $LiClO_4$ electrolytes based on TEGDME and DOL increased as the volume ratio of DOL solvent increased, because DOL effectively reduces the viscosity of the above electrolytes medium under the same salts concentration. The first discharge capacity of lithium-sulfur batteries in the DME and DOL-based electrolyte followed this order: LiTFSI (1,000 mAh/g) > LiTF (850 mAh/g) > $LiClO_4$ (750 mAh/g). In case of the electrolyte based on TEGDME and DOL, the first discharge capacity of batteries followed this order: $LiClO_4$ (1,030 mAh/g) > LiTF (770 mAh/g) > LiTFSI (750 mAh/g). The cyclic efficiency of lithium-sulfur batteries at 1M $LiClO_4$ electrolytes is higher than that of batteries at other lithium salts-based electrolytes. Lithium-sulfur battery showed discharge capacity of 550 mAh/g until 20 cycles at all electrolytes based on DME and DOL solvent. By contrast, the discharge capacity of batteries was about 450 mAh/g at 1M LiTFSI and LiTF electrolytes based on TEGDME and DOL solvent after 20 cycles.