• Journal of the Korean Chemical Society
• /
• v.65 no.5
• /
• pp.309-312
• /
• 2021

The solvolysis of (1s)-(+)-menthyl chloroformate (1) were studied kinetically in 28 pure and various mixed solvents. The analysis using the extended Grunwald-Winstein equation in the solvolysis of 1 obtained the l value of 2.46 ± 0.18, the m value of 0.91 ± 0.07, and the correlation coefficient of 0.950. The solvolysis of 1 might proceed via an associative S_N2 mechanism enhancing bond making than bond breaking in the transition state (TS). The value of l/m is 2.7 within the ranges of value found in associative S_N2 reaction. This interpretation is further supported by a relatively large solvent kinetic isotope effect (SKIE, 2.16).

• Textile Coloration and Finishing
• /
• v.6 no.3
• /
• pp.37-43
• /
• 1994

Commercial Poly(ethylene terephthalate) (PET) filaments were treated in solvents mixtures such as benzyl alcohol/perchloroethylene(BA/PER), benzyl alcohol/trichloroethylene(BA/TRI), benzyl alcohol/ethylene chloride(BA/EC), metha nol/perchloroethylene(ME/PER), and methanol/trichloroethyle(ME/TRI). Swelling of PET in solvent mixtures showed rapidly in the middle range of mixture ratio. Contribution of swelling of each component to total swelling of binary mixtures with increasing treated time was generally showed in proportion to the mixture ratio of the each component in dependence of the extend of swelling.

• Bulletin of the Korean Chemical Society
• /
• v.7 no.6
• /
• pp.416-421
• /
• 1986

The solvent coordination effect on the excited state processes of Mg(II)- and Zn(II)-phthalocyanines has been described. The triplet state of these compounds decays with mixed first and second order kinetics or mainly second order kinetics depending on the solvents used. The first order component of the rate constants decrease along with the series, dimethylsulfoxide (5-coordinated), 1-chloronaphthalene (4-coordinated) and piperidine (6-coordinated), while the second order rate constant is dependent on the diffusion rate constant of the solvents. The excited state quenching by methylviologen or p-benzoquinone is discussed. And ion recombination rate constant is given.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1999.10a
• /
• pp.292.1-292
• /
• 1999

• Journal of Korean Elementary Science Education
• /
• v.20 no.1
• /
• pp.139-147
• /
• 2001

This paper is to study on the change of volume and temperature of the solution which mixed water with ethanol. And its main purpose is to examine closely how the volume changes, and to find the method to maximize the change of the volume. The summaries for results of the study are; First, we were known that water and ethanol are homogeneously mixed. But two solvents does not mix homogeneously by different specific gravity at early stages. Second, we could see that the volume changed large at homogeneous mixed water with ethanol by stirrer, the change of volume is the largest value when water mixed with ethanol in the ratio of one to one. Third, when water mixed with ethanol in the ratio of one to one, the change of temperature is very large by activated hydrogen bond. We conclude that it is the best result when ratio of water and ethanol is one to one and the solution is well mixed.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.3
• /
• pp.265-265
• /
• 1998

The phase behavior of chlorinated hydrocarbon/mixed surfactants/water microemulsion systems were investigated for dry cleaning solvent properties. With appropriate surfactant mixtures, Winsor type I-III-II microemulsions were generated which is the same as hydrocarbon systems. For perchloroethylene(PCE) with mixed Tween systems, the optimum salinity(S*) decreases and the optimum solubilization parameter(o*) increases with decreas- ing HLB. For PCE with mixed Aerosol MA and ethoxylated alcohol systems, S* and o* both increase with increasing ethylene oxide moles. For dichlorobenzene(DCB) with mixed Aerosol MA and ethoxylated or propoxylated sulfate systems, S* and o* both increase with increasing ethylene oxide moles or propylene oxide moles.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.3
• /
• pp.365-373
• /
• 1998

The phase behavior of chlorinated hydrocarbon/mixed surfactants/water microemulsion systems were investigated for dry cleaning solvent properties. With appropriate surfactant mixtures, Winsor type I-III-II microemulsions were generated which is the same as hydrocarbon systems. For perchloroethylene(PCE) with mixed Tween systems, the optimum salinity(S*) decreases and the optimum solubilization parameter(o*) increases with decreas- ing HLB. For PCE with mixed Aerosol MA and ethoxylated alcohol systems, S* and o* both increase with increasing ethylene oxide moles. For dichlorobenzene(DCB) with mixed Aerosol MA and ethoxylated or propoxylated sulfate systems, S* and o* both increase with increasing ethylene oxide moles or propylene oxide moles.

• Journal of the Korean Chemical Society
• /
• v.17 no.3
• /
• pp.207-212
• /
• 1973

The mechanical degradation of poly (-vinylacetate) in several mixed solvents (dioxane-n-butanol, dioxane-sec-butanol, dioxane-ethyleneglycol, dioxane-kerosene.) was studied using the capillary flow method. The velocity constant of scission reaction (k) and the limited degree of polymerization (g) were compared at the same value of [${\eta}$], which is considered as the parameter of molecular dimension of polymers in solution. As result, (k) did not change much, even if the species and the volume fraction of poor (non-) solvents changed, while the value of (g) changed according to the species of poor solvents and the value of [${\eta}$]. From the facts described above, It follows that the limited degree of polymerization (g) were affected by the composition and distribution of mixed solvent molecules around the polymer chain, and the value of $\alpha$ (at [${\eta}$] = $KM^a$) in the polymer solution.

• 한국전기화학회:학술대회논문집
• /
• 2003.07a
• /
• pp.189-192
• /
• 2003

In this work, we have prepared platinum catalyst by various methods, investigated fuel cell performance and compared performance with commercially available $20\%$ Pt supported on carbon (Pt/C) catalyst. We have found that Pt/C prepared by reduction of chloroplatinic acid in mixed solvent (water+ethylene glycol) gives better performance compared to that produced by reduction of aqueous chloroplatinic acid, which can be attributed to smaller catalyst particle size and lower agglomeration in the mixed solvent. We have also prepared a novel platinum electrocatalyst by depositing platinum on Nafion coated carbon powder and it shows great promise. The performance of electrode prepared using $20\%Pt$ onn Nafion coated carbon mixed with Pt/C was found to be higher than the performance of electrodes using commercially available $20\%$ Pt/C, up to a current density of about $1100mA/cm^2$. The cell voltages obtained were respectively 621 and 603mV, at a current density of: $1000mA/cm^2$, in a single cell using $0.25mgPt/cm^2$ and Nafion 10035 membrane at $80^{\circ}C$ using hydrogen/oxygen reactants at 1 atm pressure.

• Journal of the Korean Applied Science and Technology
• /
• v.14 no.3
• /
• pp.29-38
• /
• 1997

Low toxic concentrated oil dispersant using n-Paraffin and Di(ethylene glycol)mono butylether mixed solvent was prepared, and tested by oil dispersant performance test method, and oil dispersant efficiency was measured using vertical shaking method to 3 kinds of Crude oil, Bunker oil and W/O emulsions with different physical properties by appling the prepared dispersant. Although toxicity test was performed with Flat fish and Rock fish by appling the mixed oils emulsified using prepared oil dispersant, couldn't find the toxicity to them. Concentrated oil dispersant prepared has a good dispersion efficiency of 97.2% after 0.5min settling time and 28.3% after 10min settling time to Bunker B oil with 10% water solution. Especially, the concentrated oil dispersant showing the low toxicity to Oryzias Latipes(24hr, TLm) was 54,000 ppm and to Brine Shrimp Artemia(24hr, TLm) was 51,000ppm, and also, it was completely biodegradated to 99.1% after $7{\sim}8$days.