• Bulletin of the Korean Chemical Society
• /
• 제33권11호
• /
• pp.3657-3664
• /
• 2012

Reactions of 1-adamantylmethyl chloroformate ($1-AdCH_2OCOCl$, 1) and 1-adamantylmethyl fluoroformate ($1-AdCH_2OCOF$, 2) in hydroxylic solvents have been studied. Application of the extended Grunwald-Winstein (G-W) equation to solvolyses of 1 in a variety of pure and binary solvents indicates an addition-elimination pathway in the majority of the solvents except an ionization pathway in the solvents of relatively low nucleophilcity and high ionizing power. The solvolyses of 2 show an addition-elimination pathway in all of the mixed solvents. The leaving group effects ($k_F/k_{Cl}$), the kinetic solvent isotope effects (KSIEs, $k_{MeOH}/k_{MeOD}$), and the enthalpy and entropy of activation for the solvolyses of 1 and 2 were also calculated. The selectivity values (S) for each solvent composition are reported and discussed. These observations are compared with those previously reported for other alkyl haloformate esters.

• 대한금속재료학회지
• /
• 제48권5호
• /
• pp.430-435
• /
• 2010

Solvent extraction experiments of Rh(III) and Ir(IV) were performed on the HCl solution by using Alamine336 and TBP. The extraction percentage of Rh and Ir by Alamine336 was much higher than that by TBP. For the solvent extraction with Alamine336, the extraction percentage of Rh and Ir decreased with a HCl concentration. However, the extraction percentage of both metals by TBP was below 12% in our experimental range and increased with an increasing HCl concentration of up to 8 M. From the mixed solution of Ir with an excess SnCl$_{2}$, most of the tin was extracted by Alamine336 and TBP. However, the extraction percentage of Ir by Alamine336 was reduced and no iridium was extracted by TBP. The extraction behavior of Ir and Sn was investigated by scrubbing experiments on the loaded Ir with a SnCl$_{2}$ solution.

• Bulletin of the Korean Chemical Society
• /
• 제31권2호
• /
• pp.339-343
• /
• 2010

A series of $Ce_1Mg_xZr_{1-x}O_2$ (CMZO) mixed metal oxide with different molar ratio were prepared by simple co-precipitation method. The prepared materials were tested for their catalytic activity performance using Knoevenagel condensation of various aromatic aldehydes with barbituric acid under solvent-free condition in microwave. The best catalytic activity was obtained with CMZO (1:0.6:0.4). The synthesized materials were characterized by using XRD, FT-IR, SEM-EDS techniques.

• 약학회지
• /
• 제19권1호
• /
• pp.30-35
• /
• 1975

pKi values and sensitivity of acid-base indicators in the mixed solvent systems of water-alcohols and water-acetone at differential pH and in concentration media were determined by spectrophotometric method. When the concentration of the organic solvents were increased, the pKi values of sulfophthalein indicators, thymol blue and bromcresol purple, became larger whereas those of an axo indicator, methyl yellow, became smaller nad the pH values of the equivalent points of acids became smaller and the pH values of the equivalent points of acids became higher than those in the aqueous solution. potassium bicarbonate, a standard compound used in the organic solvent systems without a prerequisite procedure of expelling carbon dioxide by boiling.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 추계학술발표대회 논문집
• /
• pp.71-74
• /
• 2005

In this paper, the effects of the MWCNTs on the PTC characteristics of the conventional CB/polymer nanocomposites were investigated. For the uniform dispersion of the MWCNTs in the polymer matrix., nitricacid-treated MWCNTs were dispersed with the dissolved HOPE in the solvent. After evaporating solvent, the dried master batches in the oven were melt blended mixed with CB and HDPE to obtain the PTC materials. The initial resistivity of PTC materials decreased and the PTC intensity increased with the MWCNTs. During three repeated heating and cooling cycles, the PTC materials containing MWCNTs showed a great reproducibility due to the conductive network structures of CB particles and MWCNTs.

• 대한화학회지
• /
• 제7권4호
• /
• pp.245-250
• /
• 1963

TBPO와 TOPO와의 混合溶媒(稀釋制 : toluene)에 依한 三假狀態의 4f 稀土類元素의 抽出에 있어 相乘效果(synerigistic effect)가 나타남을 알았으며 이것은 各 單獨溶媒系에 있어서 生成抽出되는 $M(NO_3)_3\;(TBPO)_3$ 및 $M(NO_3)_3\;(TOPO)_3$型 外에 $M(NO_3)_3\;(TBPO)_2\;(TOPO)$型이 새로히 追加生成됨을 起因된 것으로 認定된다.

• 환경위생공학
• /
• 제13권3호
• /
• pp.66-71
• /
• 1998

This study was investigated to evaluate worker exposures to organic solvents by type of print industry. Results were as follows; 1. Workers were exposed to mixture of toluene, isopropyl alcohol(IPA), methyl ethyl ketone(MEK), n-hexane, ethylacetate(EA), acetone. The components of high exposure solvents were toluene, IPA and MEK. 2. Considering additive effects of the compounds, exposure indices(Em) were calculated. The Mean of exposure indices were 1.79 for Gravere, 0.41 for Screen and 0.14 for Opset workplace. The workers of Gravere workplace were estimated to overexpose for solvents. 3. The highest overexposed solvent was toluene for a single component. The rate of overexposed level for toluene was 7.41% for some print workplace and for mixed solvent was 1.85％. 4. Local exhaust systems were inappropriate and respiratory protective devices were not supplied to the workers. 5. Sound level was over 90dB(A) in Opset print workplace and some measures should be performed to get down the sound level.

• 대한화학회지
• /
• 제16권2호
• /
• pp.100-105
• /
• 1972

The thermal degradation of poly (${\alpha}$-methyl styrene) in several mixed solvents (toluene-n-butylalcohol, toluene-sec-butylalcohol, toluene-kerosene, toluene-methyl ethyl ketone) without hydroquinone, and in with the addition of the hydroquinone, was studied at temps. of $165^{\circ}{\sim}205^{\circ}C$. The velocity constant of degradation (k), and the activation energy (E) were calculated for each solvent. As results, k decreased with the increase of the volume-fraction of poor solvent in both systems, whereas E either showed no perceptible change or it increased with the volume-fraction of poor solvents. these results were discussed.

• 한국분말재료학회지
• /
• 제9권4호
• /
• pp.218-226
• /
• 2002

The purpose of the present study is to investigate the influence of thermal debinding and sintering conditions on the sintering behavior and mechanical properties of PIMed 316L stainless steel. The water atomized powders were mixed with multi-component wax-base binder system, injection molded into flat tensile specimens. Binder was removed by solvent immersion method followed by thermal debinding, which was carried out in air and hydrogen atmospheres. Sintering was done in hydrogen for 1 hour at temperatures ranging from 1000℃ to 1350℃ The weight loss, residual carbon and oxygen contents were monitored at each stage of debinding and sintering processes. Tensile properties of the sintered specimen varied depending on the densification and the characteristics of the grain boundaries, which includes the pore morphology and residual oxides at the boundaries. The sinter density, tensile strength (UTS), and elongation to fracture of the optimized specimen were 95%, 540 MPa, and 53%, respectively.

• 한국세라믹학회지
• /
• 제32권5호
• /
• pp.559-566
• /
• 1995

Alumina powder was coated with stearic acid and then mixed with isotactic polypropylene, atactic polypropylene as binders at 15$0^{\circ}C$ for 2 hours. The mixture was then injection molded at various mold temperatures using injection molding machine to investigate the effect of the molding temperature and debinding parameters on the formation of the defects. The molded specimens were debinded in both air and nitrogen atmospheres. Wicking and solvent methods were also used to enhance debinding efficiency. The specimens were prefired at 120$0^{\circ}C$ and then sintered at 150$0^{\circ}C$ for 3 hours. Various defects were formed at mold temoperature of 3$0^{\circ}C$, 6$0^{\circ}C$ and 10$0^{\circ}C$ and any noticeable defect was not formed at 85$^{\circ}C$. The density of green body increased with mold temperature. Debinding in air atmosphere was more effective than in nitrogen atmosphere. Results also proved that wicking and solvent treatments helped minimize the number of defects.