• 제목/요약/키워드: mixed plastics

검색결과 74건 처리시간 0.026초

코로나 대전된 복합절연재료의 표면상태가 전위감쇠에 미치는 영향 (The Characteristics of Potential Decay on the Corona Electrified Composite Insulating Material by Surface Condition)

  • 황명환;정재희;조한구;송진호;이덕출
    • 한국안전학회지
    • /
    • 제12권2호
    • /
    • pp.65-69
    • /
    • 1997
  • Especially, Fiber glass Reinforced Plastics(FRP) is the best composite insulating material which has been so far. Therefore, it's worthy of notice to investigate on the corona electrified composite insulating material by surface condition. And then some other materials will be focussed on. In this study, charge decay were measured with charging-time and grid voltage on FRP composite material surface in order to analyze the mechanism. As a result we have studied that the way of the composite glass fiber(GF) and Polymer and the condition of the contaminated surface was different. In case of the GF is mixed with vertical, charge decay speed is fast because the charge is easily leaked. On the other hand, the surface charge decay speed is depend on conductive or insulated of the contaminant.

  • PDF

플라스틱 Filler로서의 적니의 재활용 (Recycling of Red Mud as Plastic Fillers)

  • 김정호;서영수;김준형
    • 청정기술
    • /
    • 제5권2호
    • /
    • pp.45-52
    • /
    • 1999
  • 알루미늄 생산의 폐기물로 나오는 적니를 플라스틱의 Filler로서 재활용하기 위한 연구를 수행하였다. 여러가지 플라스틱에 적니를 첨가하여 본 결과 고밀도폴리에틸렌(HDPE), 저밀도 폴리에틸렌(LDPE) 및 폴리프로필렌(PP)에 적니가 Filler로서 사용 가능한 것으로 나타났다. 적니가 플라스틱에 첨가됨에 따라 플라스틱은 다른 안료의 첨가 없이도 붉은 고동색을 나타내었고 인장탄성율 등은 증가하였으나 내충격 강도가 저하되었다. 이를 방지하기 위한 첨가제가 연구되었는데 HDPE에는 에틸렌비닐알코올(EVA)을 첨가제로 5%정도 첨가하는 것이 효과적인 것으로 나타났다. PP의 경우에는 Maleic anhydride 변성 PP를 첨가하면 내충격강도의 저하가 축소되었다. LDPE, HDPE, PP, 폴리스티렌 및 ABS가 섞여있는 혼합 폐플라스틱에 대해서도 적니가 Filler로서 사용 가능한 것으로 나타났는데 이때는 성분간의 비상용성으로 인하여 기계적 물성이 매우 낮았다. 역시 첨가제로서 에틸렌프로필렌 고무(EPR) 및 스티렌부타디엔 블록공중합체(SBS)를 혼합할 경우 좋은 물성을 가지는 적니 혼합 플라스틱을 얻을 수 있었다.

  • PDF

복합기능성 생분해 PLA 시트에 관한 연구 (Study on the biodegradable PLA sheet with multiple functionalities)

  • 이규동;김종균;이규득;전형도;김치곤;윤경배
    • 문화기술의 융합
    • /
    • 제5권1호
    • /
    • pp.341-346
    • /
    • 2019
  • 연구는 생분해성 PLA 시트의 확대적용에 있어, 중단기적인 도입 성과를 낼 수 있는 혼합비율 및 제조방법을 위하여 혼합비율을 연구하고 적용하는데 제공하고자 한다. 방담기능의 목적으로 사용되는 생분해성 PLA 시트로 방담 기능성을 가지면서 고 내열성, 내 충격성 및 투명성이 향상된 복합 기능성 다층 구조시트로서 복합기능성 다층 구조 시트를 제조하기 위해서 3 Layer 공정을 도입하였다. 내층, Core층, 외층을 구분하여 혼합 압출하였으며, 내층과 Core층은 내 충격성, 고 내열성을 가지며, 외층은 방담기능성을 부여하는 생분해성 PLA 다층 시트구조로 연구한다. 본 연구 결과를 적용함으로써, 일반 PLA 물성 및 내열온도를 향상시켜 플라스틱 대체 및 확대 적용이 가능하다.

국립민속박물관 소장 19~20세기 갓끈 재질 조사: 호박, 대모, 플라스틱, 유리를 중심으로 (Investigation of the 19th~20th century Hat String Materials at the National Folk Museum of Korea: Amber, Tortoise Shell, Plastics, Glass)

  • 오준석;이새롬;황민영;노수정;이영민;박성희;임성희
    • 헤리티지:역사와 과학
    • /
    • 제51권4호
    • /
    • pp.66-83
    • /
    • 2018
  • 갓끈은 조선시대 남성용 모자인 갓을 고정하는 실용적인 면과 함께 사용하는 재료의 다양화에 따라 신분을 나타내는 장식적인 구실도 하여, 금, 은, 옥, 마노, 호박, 명박, 산호, 청금석, 수정 등 다양한 고급 재료가 사용되어 왔다. 19세기 말 개항과 함께 근현대로 넘어오면서 갓끈의 재질이 어떻게 변천되었는지, 국립민속박물관 소장품 중 19~20세기 갓끈에 대해 재질을 조사하였다. 갓끈의 재질을 분석한 결과, 전통적인 재질로는 호박, 대모, 나무, 대나무가 사용되었으며, 상아, 유리(소다유리, 납유리, 알칼리혼합유리)와 19세기 이후 발명된 신소재인 플라스틱(셀룰로오스 나이트레이트, 페놀-포름알데히드, 폴리스티렌, 아크릴)이 갓끈 장식에 새롭게 사용되었다. 갓끈의 중앙 장식, 구슬, 대롱에 사용된 재료는 대모가 가장 많이 차지하며, 대나무, 나무, 호박 순으로 전통 재료의 사용 빈도가 높았다. 대나무는 대롱으로 사용하여 다른 재질의 중앙 장식과 구슬을 조합한 갓끈이 많아, 흥선대원군 집정시 의관과 문물의 간소화시책에 따른 죽영이 유행을 보여주고 있다. 호박은 갓끈의 중앙 장식과 구슬에 사용되었으며, 산지는 한국에서 발견되고 있는 호박 유물과 마찬가지로 유럽의 발틱 호박으로 동정되었다. 갓끈에 사용된 유리는 고대부터 조선시대까지 한국에서 출토되거나 전승되어온 소다유리나 알칼리혼합유리도 사용되었지만, 납유리에서는 Na2O가 검출되어 한국에서 발견되는 납유리 성분에서 벗어난 특징을 보여주어, 개항 후 해외에서 들어온 새로운 공예용 유리로 추정된다. 셀룰로오스 나이트레이트나 페놀-포름알데히드 등과 같은 플라스틱은 서구에서와 마찬가지로 전통재료인 대모, 호박, 산호 등을 대체하는 새로운 합성재료로써 도입되어 사용되고 있음을 보여주고 있으며, 셀룰로오스 나이트레이트는 열화에 의해 균열과 미세 균열, 부서짐과 황변이 관찰되고 있었다. 국립민속박물관 소장 19~20세기 갓끈 재질에 대한 조사를 통해, 개항이후 전통적인 재료의 사용과 함께, 대모나 호박과 같은 천연재료를 대체하기 위해 유리와 플라스틱과 같은 신소재의 도입이 확인되었다.

폐기저귀 함유 펄프와 혼합 플라스틱의 업사이클링 연구 (The Research on Upcycling of Recovered Pulp and Mixed Plastic from Soiled Diaper)

  • 김경신
    • 자원리싸이클링
    • /
    • 제24권5호
    • /
    • pp.22-32
    • /
    • 2015
  • 본 연구는 폐기저귀 재활용 공정 이후 회수되는 재생 자원의 가치를 높여 경제성을 확보하기 위한 관점에서 업사이클링 개념을 논의하고, 벤치마킹을 통해 펄프와 혼합 플라스틱의 업사이클링 방안을 수립하고자 하였다. 업사이클링은 원래의 물질이 다시 사용될 때 품질이 향상되고 폐기물을 질적 환경적으로 더 높은 가치를 가진 새로운 물질이나 제품으로 전환하는 과정으로 요약되며, 다양한 사례를 통해 용도를 다 한 제품이더라도 새로운 가치를 갖게 된다는 것을 알게 되었다. 그러나 기존의 업사이클링 사례들은 정성적인 디자인 요소를 통한 가치 창출이므로 정량적인 전략의 도출이 어렵고 업사이클링 완제품 시장 경쟁력에 대한 판단이 불확실하다. 따라서 본 연구에서는 활용성 차원에서 B2B 제품까지 범위를 확장하고, 재생펄프와 혼합 플라스틱 두 소재를 같이 활용할 수 있도록 업사이클링 방향성을 설정하여 이를 만족할 수 있는 제품군에 대해 분석하였다. 그 결과, 셀룰로오스 단열재로의 적용을 제안하며, 향후 국내/외 단열재 시장에서 고성능 셀룰로오스 비중이 약 3배 이상 급성장 할 것으로 예측되기 때문에 본 시장을 목표로 업사이클링 전략을 세워야 할 것으로 보인다.

ABS와 PS 혼합(混合) 폐플라스틱 재질분리(材質分利)를 위한 마찰하전형정전선별(摩擦荷電型靜電選別) 기술개발(技術開發) (Development of Triboelectrostatic Separation Technique for Material Separation of ABS and PS Mixed Plastic Waste)

  • 이은선;백상호;김수강;최우진;진호일;전호석
    • 자원리싸이클링
    • /
    • 제22권6호
    • /
    • pp.33-40
    • /
    • 2013
  • 다양한 분야에 사용되고 있는 플라스틱은 최근 환경문제가 대두되면서 재활용 이슈가 부각되고 있다. 본 연구에서는 마찰하전형정전선별을 적용하여 ABS(Acrylonitrile Butadiene Styrene)와 PS(Polystyrene)의 혼합된 폐플라스틱으로부터 ABS를 회수하기 위한 재질분리 연구를 수행하였다. 하전물질의 재질선정을 위한 하전특성연구결과, ABS재질이 대상시료인 ABS와 PS의 혼합 폐플라스틱의 재질분리에 효과적인 하전재질로 확인되었다. 선정된 하전물질을 적용하여 마찰하전형정전선별을 수행한 결과, 공급전압세기 20 kV, 분리대위치 양극방향 2 cm 그리고 상대습도 30%에서 ABS의 품위와 회수율이 각각 99.5%와 92.5%인 결과를 얻어, ABS와 PS의 혼합 플라스틱의 재활용을 위한 재질분리 기술을 확립하였다.

Assessment and Applications of Multi-Degradable Polyethylene Films as Packaging Materials

  • Chung, Myong-Soo;Lee, Wang-Hyun;You, Young-Sun;Kim, Hye-Young;Park, Ki-Moon;Lee, Sun-Young
    • Food Science and Biotechnology
    • /
    • 제15권1호
    • /
    • pp.5-12
    • /
    • 2006
  • Degradation performance of environmentally friendly plastics that can be disintegrated by combination of sunlight, microbes in soil, and heat produced in landfills was evaluated for use in industries. Two multi-degradable master batches (MCC-101 and MCC-102 were manufactured, separately mixed with polyethylene using film molding machine to produce 0.025 mm thick films, and exposed to sunlight, microbes, and heat. Low- and high-density polyethylene (LDPE and HDPE) films containing MCC-101 and MCC-102 became unfunctional by increasing severe cleavage at the surface and showed high reduction in elongation after 40 days of exposure to ultraviolet light. LDPE and HDPE films showed significant physical degradation after 100 and 120 days, respectively, of incubation at $68{\pm}2^{\circ}C$. SEM images of films cultured in mixed mold spore suspension at $30^{\circ}C$ and 85% humidity for 30 days revealed accelerated biodegradation on film surfaces by the action of microbes. LDPE films containing MCC-l01 showed absorption of carbonyls, photo-sensitive sites, at $1710\;cm${-1}$ when exposed to light for 40 days, whereas those not exposed to ultraviolet light showed no absorption at the same frequency. MCC-101-based LDPE films showed much lower $M_w$ distribution after exposure to UV than its counterpart, due to agents accelerating photo-degradation contained in MCC-101.

연마재 워터젯을 위한 노즐상태 모니터링 시스템 설계 (Nozzle Condition Monitoring System for Abrasive Waterjet Process)

  • 김정욱;김노원;김철민;김성렬;김현희;이경창
    • 한국산업융합학회 논문집
    • /
    • 제23권5호
    • /
    • pp.817-823
    • /
    • 2020
  • In recent, the machining of difficult-to-cut materials such as titanium alloys, stainless steel, Inconel, ceramic, glass, and carbon fiber reinforced plastics (CFRP) used in aerospace, automobile, medical industry is actively researched. Abrasive waterjet is a non-traditional processing method in which ultra-high pressure water and abrasive particles are mixed in a mixing chamber and shoot out jet through a nozzle, and removed by erosion due to collision with a material. In particular, the nozzle of the abrasive waterjet is one of the most important parts that affect the machining quality as with a cutting tool in general machining. It is very important to monitor the condition of the nozzle because the workpiece is uncut or the surface quality deteriorates due to wear, expanding of the bore, damage of the nozzle and clogging of the abrasive, etc. Therefore, in this paper, we propose a monitoring system based on Acoustic Emission(AE) sensor that can detect nozzle condition in real time during AWJ processing.

혼합폐플라스틱으로부터의 대체연료유 생산기술에 대한 실증연구 (The Study for Manufacturing Technology of Industrial Fuel from Mixed Waste Plastics)

  • 이대식;이광식;김성옥;오세천;김수룡;권우택
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2005년도 제17회 워크샵 및 추계학술대회
    • /
    • pp.405-413
    • /
    • 2005
  • 본 연구에서는 3톤/일의 플라스틱 투입량을 기준으로 혼합폐플라스틱으로부터 대체연료유를 생산할 수 있는 소용량 중심의 폐플라스틱 유화설비를 설계 제작하였으며 장기간에 걸친 시운전을 통하여 유화설비의 운전성 평가에 대한 실증연구를 수행하였다. 대상 폐플라스틱으로는 플라스틱 재활용 업체에서 분리 선별된 폴리에틸렌과 폴리프로필렌 그리고 이들을 혼합한 폐플라스틱을 각각 적용하였으며 $400\sim420^{\circ}C$의 분해 운전온도에서 폐플라스틱의 종류에 따른 시운전 평가를 하였다. 본 실증연구로부터 폴리에틸렌의 경우에 있어서는 79%의 재생유 회수율을 그리고 폴리프로필렌의 경우에 있어서는 80%의 재생유 회수율을 각각 얻을 수 있었으며 플라스틱 종류별 안정적인 운전조건을 확보할 수 있었다. 또한 폐플라스틱 투입량에 대한 설계용량과 운전용량과의 비교로부터 약 40$\sim$50%의 설계오차가 발생한 것으로 평가되었으며 이는 유화설비의 설계를 위하여 사용된 혼합폐플라스틱의 부정확한 물성 값에 기인한 것으로 판단된다. 따라서 본 연구로부터 얻은 시운전결과를 바탕으로 설계인자들을 확립하는 과정이 반드시 필요할 것으로 판단된다.

  • PDF

이산화탄소 저감형 고분자 블렌드의 상 분리 특성연구 (Study on Phase Separation of Carbon Dioxide-reducible Polymer Blends)

  • 조용광;김영우;이학용;박상보;박찬영;이원기
    • 한국환경과학회지
    • /
    • 제24권1호
    • /
    • pp.9-15
    • /
    • 2015
  • Sustainable and eco-friendly polymers, natural polymers, bio-based polymers, and degradable polyesters, are of growing interest because of environmental concerns associated with waste plastics and emissions of carbon dioxide from preparation of petroleum-based polymers. Degradable polymers, poly(butylene adipate-co-terephthalate) (PBAT), poly(propylene carbonate) (PPC), and poly(L-lactic acid) (PLLA), are related to reduction of carbon dioxide in processing. To improve a weak mechanical property of a degradable polymer, a blending method is widely used. This study was forced on the component separation of degradable polymer blends for effective recycling. The melt-mixed blend films in a specific solvent were separated by two layers. Each layer was analysed by FT-IR, DSC, and contact angle measurements. The results showed that each component in the PPC/PLLA and PPC/PBAT blends was successfully separated by a solvent.