• Structural Monitoring and Maintenance
• /
• v.1 no.1
• /
• pp.131-157
• /
• 2014

Special track systems used to divert a train to other directions or other tracks are generally called 'railway turnout'. A traditional turnout system consists of steel rails, switches, crossings, steel plates, fasteners, screw spikes, timber bearers, ballast and formation. The wheel rail contact over the crossing transfer zone has a dip-like shape and can often cause detrimental impact loads on the railway track and its components. The large impact also emits disturbing noises (either impact or ground-borne noise) to railway neighbors. In a brown-field railway track where an existing aged infrastructure requires renewal or maintenance, some physical constraints and construction complexities may dominate the choice of track forms or certain components. With the difficulty to seek for high-quality timbers with dimensional stability, a methodology to replace aged timber bearers in harsh dynamic environments is to adopt an alternative material that could mimic responses and characteristics of timber in both static and dynamic loading conditions. A critical review has suggested an application of an alternative material called fibre-reinforced foamed urethane (FFU). The full-scale capacity design makes use of its comparable engineering characteristics to timber, high-impact attenuation, high damping property, and a longer service life. A field trial to investigate in-situ behaviours of a turnout grillage system using an alternative material, 'fibre-reinforced foamed urethane (FFU)' bearers, has been carried out at a complex turnout junction under heavy mixed traffics at Hornsby, New South Wales, Australia. The turnout junction was renewed using the FFU bearers altogether with new special track components. Influences of the FFU bearers on track geometry (recorded by track inspection vehicle 'AK Car'), track settlement (based on survey data), track dynamics, and acoustic characteristics have been measured. Operational train pass-by measurements have been analysed to evaluate the effectiveness of the replacement methodology. Comparative studies show that the use of FFU bearers generates higher rail and sleeper accelerations but the damping capacity of the FFU help suppress vibration transferring onto other track components. The survey data analysis suggests a small vertical settlement and negligible lateral movement of the turnout system. The static and dynamic behaviours of FFU bearers appear to equate that of natural timber but its service life is superior.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.9
• /
• pp.1421-1429
• /
• 2020

Objective: The objective of this study was to investigate the net micromineral (Cu, Fe, Mn, Zn) requirements for maintenance and growth of Dorper×Jinzhong crossbred ewe lambs at their latter fattening period. Methods: Thirty 1/2 Dorper × 1/2 Jinzhong crossed F1 ewe lambs (35±0.5 kg of body weight [BW]) were used and divided into five groups in a randomized design for a comparative slaughter trial. At the beginning of the experiment, six lambs were randomly selected and slaughtered at 35 kg BW to determine their initial body composition. When their BWs reached 43 kg, another six lambs fed ad libitum were slaughtered to serve as an intermediate slaughter group. The retained eighteen lambs were randomly distributed into three groups and offered one type of feed at 100%, 65%, and 40% of the ad libitum intake. When the lambs fed ad libitum reached a BW of 50 kg, the three groups were slaughtered. The body composition (muscle, fat, bone, blood with viscera, skin, and wool) were weighted, ground, mixed, and subsampled for mineral content analysis. Results: The net maintenance requirements of Cu, Fe, Mn, and Zn were 0.017, 0.160, 0.004, and 0.067 mg/kg BW/d, respectively, and the net growth requirements per 100 grams of average daily gain ranged from 0.48 to 0.51 mg of Cu, 2.63 to 2.17 mg of Fe, 0.12 to 0.15 mg of Mn, and 2.07 to 2.00 mg of Zn, respectively, for Dorper × Jinzhong crossed ewes from 35 to 50 kg BW. Conclusion: Our results suggest that the micromineral requirements for both maintenance and growth of Dorper × Jinzhong crossbred ewe lambs were quite different from the recommendations of NRC (2007), except for Zn.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.7
• /
• pp.967-973
• /
• 2000

A metabolism trial was conducted with 28 Najdi rams allocated into seven dietary groups to evaluate the effect of dietary inclusion of Salicornia bigelovii Torr biomass on nutrient digestibility, rumina I fluid metabolites and nitrogen and mineral balances. Either the stems (ST) or spikes (SP) of this seawater-irrigated halophyte were incorporated into complete diets at rates of 0, 10, 20 and 30% levels, replacing equal amounts of rhodesgrass hay in a ground mixed control diet. Digestibility of DM, OM, EE, NFE and fecal and urinary nitrogen were not affected by increased level of ST in the diet. As level of ST increased from 0 to 20% in the diets, CP digestibility and nitrogen retention approached their maximum (p<0.01), whereas CF digestibility reached its minimum (p<0.01). On the other hand, except for EE, digestion of all nutrients and nitrogen retention were linearly depressed (p<0.01) as SP increased in the diets from 10 to 30% level. Concentration of ammonia-N, total VFA and pH values in the rumen fluid were lower (p<0.01) with the ST- or SP-fed diets than with the control diet. Increasing level of ST or SP in the diet was associated with an increase (p<0.01) in the proportion of acetate and a decline (p<0.01) in molar percentage of propionate in the ruminal fluid. Sodium absorption increased (p<0.01) with increased ST and SP in the diets up to the 10 and 20% level, respectively, followed by constant absorption values up to the 30% level. When the level of ST in the diet gradually increased to 30%, a concomitant increased (p<0:01) in Ca and P absorption were obvious; whereas, increased level of SP in the diets from 0 to 30% resulted in noticeable (p<0.01) depression in Ca and P apparent absorption.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.48 no.6
• /
• pp.849-856
• /
• 2015

This study was performed to obtain basic data regarding the development of fish steak products using olive flounder and pork leg. Olive flounder and pork leg were ground separately in a chopper. The methods used for processing were as follows. Chopped olive flounder (100 g) and other ingredients (bread crumbs, 13 g; onion, 12 g; garlic, 4 g; egg wash, 18 g; salt, 0.05 g; pepper, 0.05 g) were mixed in a chopper. The mixture was molded into a steak shape ($12{\times}7cm$) and roasted in an oven at $180^{\circ}C$ for 12 min (OF). FP consisting of a mixture of olive flounder (70 g) and pork leg meat (30 g) and OP consisting of pork leg meat alone (100 g) were processed according to the same procedure as described for OF. Various factors (viable bacterial count, chemical composition, pH, salinity, hardness value, color value, total amino acid content, free amino acid content, fatty acid composition, mineral content) were measured, and sensory evaluation was conducted. Based on the results of the sensory evaluation and hardness value, OP was deemed to be the most desirable, followed in order by FP and OF. There was a slight but significant difference between OP and FP.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.24
• /
• pp.10627-10630
• /
• 2015

Background: Epidermal growth factor receptor (EGFR) mutations play a vital role in the prognosis of patients with lung adenocarcinoma. Such somatic mutations are more common in women who are non-smokers with adenocarcinoma and are of Asian origin. However, to our knowledge, there are few studies that have focused on men. Materials and Methods: One hundred and eighty-four consecutive patients (90 men and 94 women) of resected lung adenocarcinoma were studied retrospectively. Results: EGFR mutations were positive in 48.9% and negative (wild type) in 51.1%. Overall mutation was significant in women (66.0% vs. 32.2%) compared with men (p<0.001). For overall patients, EGFR mutation status was associated with gender, pStage, pT status, lepidic dominant histologic subtype, pure or mixed ground-glass nodule type on computed tomography and smoking status. However, in men, EGFR mutation status was only associated with lepidic dominant histologic subtype and not the other variables. Interestingly, the Brinkman index of men with mutant EGFR also did not differ from that for the wild type ($680.0{\pm}619.3$ vs. $813.1{\pm}552.1$ p=0.1077). Conclusions: The clinical characteristics of men with lung adenocarcinoma related to EGFR mutation are not always similar to that of overall patients. Especially we failed to find the relationship between EGFR mutations and smoking status in men.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.3 no.1
• /
• pp.61-71
• /
• 1995

This study is concerned with the assessment of the possibility of alum sludge composting, as well as changes of some chemical properties during composting. Alum sludge was mixed in different proportions, which are 0%, 25%, 35% and 45%, respectively, with a sewage sludge and sawdust mixture. The final mixtures to be composted are placed on static piles constructed with a perforated aeration pipe on the ground, and composted for more than 50 days. During the composting of some alum sludge treatments, there was not notable difference in changes of pH, C/N ratio, and content of several minerals among the alum sludge treatments, while changes of pile temperatures and CEC were significant and these remarkable differences in related to the pile temperatures and CEC seem suitable for the evaluation of alum sludge maturity. Also, the results suggested that the proper mixing ratio of alum sludge for composting was 25% level.

• Journal of Environmental Science International
• /
• v.25 no.12
• /
• pp.1689-1699
• /
• 2016

The growth conditions of planted trees, invasion of nuisance herbaceous species, competition between species, and effects of erosion control were monitored over five years in a riparian greenspace in Gapyeong County that was established through multilayered and grouped ecological planting. Of 156 trees planted in the upper and middle layers, 5.8% died. This tree death was attributed to poor drainage or aeration in the rooting zone from the clay-added root ball and too deep planting as well as a small-sized root ball and scanty fine roots. Of all the trees, 21.6% grew poorly due to transplant stress in the first year after planting, but they started to grow vigorously in the third year. This good growth was largely associated with soil improvement before planting, selection of appropriate tree species based on growth ground, and control of dryness and invasive climbing plants through surface mulching and multilayered/grouped planting. Mixed planting of fast-growing species as temporary trees was desirable for accelerating planting effect and increasing planting density. Thinning of fast-growing trees was required in the fifth year after planting to avoid considerable competition with target species. To reduce the invasion of herbaceous and climbing plants that oppress normal growth of planted trees, higher density planting of trees (crown opening of about 15%), woodchip mulching to a 10-cm depth, and edge planting 2 m wide were more effective than lower density planting (crown opening of 70%), no surface mulching, and no edge planting, respectively. This reduction effect was especially great during the first three years after planting. Nuisance herbaceous plants rarely invaded higher density planting with woodchip mulching over the five years. Higher density planting or woodchip mulching also showed much greater erosion control through rainfall interception and buffering than lower density planting with no mulching did. Based on these results, desirable planting and management strategies are suggested to improve the functions of riparian greenspaces.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09b
• /
• pp.61-67
• /
• 2010

Thick soft clay deposits which are generally located at the west and south coast of the Korean peninsula have complicated characteristics according to their orientation and formation history. Thus, several geotechnical problems could possibly occur when those soft clay deposits are used as foundations for marine structures. Deep cement mixing (DCM) method is one of the most widely used soft soil improvement method for various marine structures, nowadays. DCM method injects binders such as cement into the soft ground directly and mixes with the in-situ soil to improve the strength and other geotechnical properties sufficiently. However, the natural impacts induced by dynamic motions such as ocean waves, wind, typhoon, and tusnami give significant influences on the stability of marine structures and their underlaying foundations. Thus, the dynamic properties become important design criteria to insure the seismic stability of marine structures. In this study, the dynamic behavior of cemented Busan clay is evaluated. Laboratory unconfined compression test and resonant column test are performed on natural in-situ soil and cement mixed specimens to confirm the strength and strain-dependent dynamic behavior variation induced by cement mixing treatment. Results show that the unconfined compressive strength and shear modulus increase with curing time and cement content increment. Finally, the optimized cement mixing ratio for sufficient dynamic stability is obtained through this study. The results of this study are expected to be widely used to improve the reliability of seismic design for marine structures.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.4
• /
• pp.79-88
• /
• 2017

Ignition test of the fuel-rich propellant coated with ignition support material in the ramjet combustor condition was conducted. Ignition delay and flame holding was measured. Fuel grain consist of HTPB mixed with AP particle 15 wt.%, Al particle 5 wt.%. To cause the short ignition delay, ignition support consist of $NC/BKNO_3$ and composite propellant was coated to the fuel grain. Ethanol blended $H_2O_2$ gas generator control the temperature, pressure, $O_2$ concentration in the oxidizer gas in the air. Gas is supplied with mass flux of $200kg/m^2s$. Through the test ignition support operated well and ignition delay of 0.6 second and the Flame was sustained.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.6
• /
• pp.197-204
• /
• 2007

Ceramic pigments were developed by using 4 kinds of Brass scraps. Each Brass scraps were mixed with same weight-ratio of Husk ash, and fine-ground by Rotate ring mill(RRG-120, Armstech industrial. co. Ltd, Korea) after firing at $900^{\circ}C$, $1000^{\circ}C$ and $1100^{\circ}C$. As a result, analysis of particle size of synthetic pigments by particle size analyser, they are $3{\mu}m$ as average. The resulting pigments were characterized by using XRD, FT-IR, SEM Structure of the crystals are Zn2SiO4,, and ZnO, Cu2O, CuO, and cristobalite are existed and particles' shape are plate or needle. As a result of analysis of chemical composition by XRF, synthetic pigments have high SiO2 and CuO content and have SnO2, ZnO and NiO, too. 1wt%, 3wt% and 5wt% pigments were added in each lime glaze, lime-barium glaze and lime-magnesia glaze, and fired at oxidation and reducing atmosphere to figure hue in glazes out. As a result of analysis of color, chroma and brightness by UV, colors of glazes fired at oxidation atmosphere turned into green from sky blue, and colors of glazes fired at reducing atmosphere turned into pink and red.