• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.16-19
• /
• 2019

A thinner film has superior electrical properties and a better amorphous structure. Amorphous structures can be effective in improving conductivity through a depletion effect. Research is needed on the Schottky contact, where potential barriers are formed, as a way to identify these characteristics. $SiO_2/SnO_2$ thin films were prepared to examine the amorphous structure and Schottky contact, $SiO_2$ thin films were prepared using Ar = 20 sccm. $SnO_2$ thin films were deposited using mixed gas with a flow rate of argon and oxygen at 20 sccm, and $SnO_2$ thin films were added by magnetron sputtering and treated at $100^{\circ}C$ and $150^{\circ}C$. To identify the conditions under which the amorphous structure was constructed, the XRD patterns were investigated and C-V and I-V measurements were taken to make Al electrodes and perform electrical analysis. The depletion layer was formed by the recombination of electrons and holes through the heat treatment process. $SiO_2/SnO_2$ thin films confirmed that the pores were well formed when heat treated at $100^{\circ}C$ and an electric current was applied over the micro area. An amorphous $SiO_2/SnO_2$ thin film with heat treatment at $100^{\circ}C$ showed no reflection at $33^{\circ}\;2{\theta}$ in the XRD pattern, and a reflection at $44^{\circ}2\;{\theta}$. The macroscopic view (-30 V

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.42 no.2
• /
• pp.61-72
• /
• 2022

The present study was conducted to examine the effect of soybean silage as a crude protein supplement for corn silage in the diet of Hanwoo steers. The first experiment was conducted to evaluate the effect of replacing corn silage with soybean silage at different levels on rumen fermentation characteristics in vitro. Commercially-purchased corn silage was replaced with 0, 4, 8, or 12% of soybean silage. Half gram of the substrate was added to 50 mL of buffer and rumen fluid from Hanwoo cows, and then incubated at 39℃ for 0, 3, 6, 12, 24, and 48 h. At 24 h, the pH of the control (corn silage only) was lower (p<0.05) than that of soybean-supplemented silages, and the pH numerically increased along with increasing proportions of soybean silage. Other rumen parameters, including gas production, ammonia nitrogen, and total volatile fatty acids, were variable. However, they tended to increase with increasing proportions of soybean silage. In the second experiment, 60 Hanwoo steers were allocated to one of three dietary treatments, namely, CON (concentrate with Italian ryegrass), CS (concentrate with corn silage), CS4% (concentrate with corn silage and 4% of soybean silage). Animals were offered experimental diets for 110 days during the growing period and then finished with typified beef diets that were commercially available to evaluate the effect of soybean silage on animal performance and meat quality. With the soybean silage, the weight gain and feed efficiency of the animal were more significant than those of the other treatments during the growing period (p<0.05). However, the dietary treatments had little effect on meat quality except for meat color. In conclusion, corn silage mixed with soybean silage even at a lower level provided a greater ruminal environment and animal performances, particularly with increased carcass weight and feed efficiency during growing period.

• Journal of Food Hygiene and Safety
• /
• v.38 no.4
• /
• pp.211-216
• /
• 2023

A total of 100 commercially available olive oil products were analyzed for 179 pesticide residues using gas chromatography-tandem mass spectrometry (GC/MS/MS). The olive oil samples were mixed with organic solvents, centrifuged and frozen to remove fat, and pesticide residues were analyzed using the "quick, easy, cheap, effective, rugged, and safe" (QuEChERS) method. The determination coefficient (R²) of the analysis method used in this study was ≥0.998. The detection limit of the method ranged 0.004-0.006 mg/kg and its quantitative limit ranged 0.012-0.017 mg/kg. The recovery rate (n=5) measured at the level ranging 0.01-0.02, 0.1, and 0.5 mg/kg ranged 66.8-119.5%. The relative standard deviation (RSD) was determined to be ≤5.7%, confirming that this method was suitable for the "Guidelines for Standard Procedures for Preparing Food Test Methods". The results showed that a total of 151 pesticides (including difenoconazole, deltamethrin, oxyfluorfen, kresoxim-methyl, phosmet, pyrimethanil, tebuconazole, and trifloxystrobin) were detected in 64 of the 100 olive oil products. The detection range of these pesticide residues was 0.01-0.30 mg/kg. The percentage acceptable daily intake (%ADI) of the pesticides calculated using ADI and estimated daily intake (EDI) was 0.0001-0.1346, indicating that the detected pesticides were present at safe levels. This study provides basic data for securing the safety of olive oil products by monitoring pesticide residues in commercially available oilve oil products. Collectively, the analysis method used in this study can be used as a method to analyze residual pesticides in edible oils.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.4
• /
• pp.333-343
• /
• 1984

This study was designed to elucidate the lipid and its fatty acid composition in various tissues of fresh water fishes. The free and bound lipids in meat, skin and viscera of crucian carp (Carassius carassius) were extracted with ethyl ether and the mixed solvent of chloroform-methanol-water (10/9/1, v/v). The free and bound lipids were fractionated into neutral lipid, glycolipid and phospholipid by a silicic acid column chromatography using chloroform, acetone and methanol, respectively, and quantitatively analyzed by thin layer chromatography (TLC) and TLC scanner. The fatty acid compositions of polar ana nonpolar lipids in meat, and these of neutral lipid in various tissues were analyzed by gas liquid chromatography(GLC). The free lipid content in meat, skin and viscera was $6.22\%,\;9.95\%\;and\;9.76\%$, whereas the bound lipid content in those tissues was $10.01\%,\;3.56\%\;and\;7.36\%$, respectively. The neutral lipid contents in free lipid were ranged from $71.7\%$ to $89.4\%$, and $3{\sim}9$ times higher than those in bound lipid, while the phospholipid contents in bound lipid were ranged from $42.3\%$ to $63.2\%$, and $5{\sim}10$ times higher than those in free lipid. The neutral lipid was mainly consisted of triglyceride ($81.91{\sim}88.34\%$) in free lipid, and esterified sterol & hydrocarbon ($41.00{\sim}59.43\%$) in bound lipid. The phospholipid was mainly consisted of phosphatidyl ethanolamine($54.56{\sim}66.79\%$) and phosphatidyl choline ($21.88{\sim}34.28\%$) in free lipid, and phosphatidyl choline ($50.49{\sim}70.57\%$) and phosphatidyl ethanolamine ($15.74{\sim}24.92\%$) in bound lipid. The major fatty acids of polar lipid in free and bound lipids were $C_{16:0}\;(17.53\%,\;19.29\%)$, $C_{18:1}\;(24.57\%,\;16.08\%)$, $C_{18:2}\;(8.39\%,\;4.03\%)$, $C_{22:5}\;(1.68\%,\;8.08\%)$, and $C_{22:6}\;(6.22\%,\;13.60\%)$ and these of neutral lipid in free and bound lipids were $C_{16:0}\;(17.67\%,\;24.15\%)$, $C_{16:1}\;(12.81\%,\;5.52\%)$, $C_{18:1}\;(24.13\%,\;13.02\%)$, $C_{18:2}\;(15.47\%,\;8.68\%)$, $C_{22:5}\;(0.88\%,\;4.14\%)$ and $C_{22:6}\;(1.17\%,\;5.04\%)$, respectively. The unsaturations (TUFA/TSFA) of polar lipid in free and bound lipids were 2.02 and 2.74, and $1.5{\sim}2.0$ times higher than 1.51 and 1.23 of nonpolar lipid. In both polar and nonpolar lipids, w3 highly unsaturated fatty acid (w3HUFA) content of bound lipid was $2{\sim}5$ times higher than that of free lipid. The polyenoic acid contents such as $C_{20:5},\;C_{22:5}\;and\;C_{22:6}$ in bound lipid were $2{\sim}5$ times higher than these in free lipid. Consequently, there were significant difference between the lipid and its fatty acid composition in free and bound lipids and/or in various tissues.

• Journal of the Korean Vacuum Society
• /
• v.17 no.1
• /
• pp.16-22
• /
• 2008

We studied plasma etching of polycarbonate in $O_2/SF_6$, $O_2/N_2$ and $O_2/CH_4$. A capacitively coupled plasma system was employed for the research. For patterning, we used a photolithography method with UV exposure after coating a photoresist on the polycarbonate. Main variables in the experiment were the mixing ratio of $O_2$ and other gases, and RF chuck power. Especially, we used only a mechanical pump for in order to operate the system. The chamber pressure was fixed at 100 mTorr. All of surface profilometry, atomic force microscopy and scanning electron microscopy were used for characterization of the etched polycarbonate samples. According to the results, $O_2/SF_6$ plasmas gave the higher etch rate of the polycarbonate than pure $O_2$ and $SF_6$ plasmas. For example, with maintaining 100W RF chuck power and 100 mTorr chamber pressure, 20 sccm $O_2$ plasma provided about $0.4{\mu}m$/min of polycarbonate etch rate and 20 sccm $SF_6$ produced only $0.2{\mu}m$/min. However, the mixed plasma of 60 % $O_2$ and 40 % $SF_6$ gas flow rate generated about $0.56{\mu}m$ with even low -DC bias induced compared to that of $O_2$. More addition of $SF_6$ to the mixture reduced etch of polycarbonate. The surface roughness of etched polycarbonate was roughed about 3 times worse measured by atomic force microscopy. However examination with scanning electron microscopy indicated that the surface was comparable to that of photoresist. Increase of RF chuck power raised -DC bias on the chuck and etch rate of polycarbonate almost linearly. The etch selectivity of polycarbonate to photoresist was about 1:1. The meaning of these results was that the simple capacitively coupled plasma system can be used to make a microstructure on polymer with $O_2/SF_6$ plasmas. This result can be applied to plasma processing of other polymers.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.4 no.1
• /
• pp.1-23
• /
• 1968

This study aimed at contributing to the improvement of cropping systems after finding out the effects of excrements and components of crop root influence on other crops as well as themselves. The following forage crops suitable for our country were selected for the present study. Aqueous extracts of fresh roots, aqueous extracts of rotting roots and aqueous solutions of excrements of red clover, orchard grass and brome grass were studied for the effects influencing the germination and growth of seedlings of red clover, ladino clover, lespedeza, soybean, orchard grass, Italian ryegrass, brome grass, barley, wheat, sorghum, corn and Hog-millet. In view of the possibility that the organic acid might be closely related to the excrements and components of crop root connected with soil sickness, the acid components of three species of roots were analysed by paper chromatography and gas chromatography method. The following results were obtained: 1. Effects of Aqueous Extracts of Fresh Roots : Aqueous extracts of red clover: The extracts inhibited the growth of seedlings of the ladino clover and lespedeza and also inhibited the development of most crops except that of sorghum among the Graminaceae. Aqueous extracts of orchard grass: The extracts promoted the seedlings growth of red clover and soybean, while it inhibited the germination and growth of orchard grass. There were no noticeable effects influencing other crops while it inhibited the growth of barley and Hog-millet. Aqueous extracts of brome grass: There was no effect on Italian ryegrass but there was an inhibiting effect on the other crops. 2. Effects of Aqueous Extracts of Rotting Roots : Aqueous extracts of red clover: The extracts promoted the seedling growth of red clover. But it reflected the inhibiting effects on other crops except sorghum. Aqueous extracts of orchard grass: The extracts promoted the growth of red clover, ladino clover, soybean and sorghun, while it inhibited the germination and rooting of barley and Hog-millet. Aqueous extracts of brome grass: The extracts gave the promotive effects to the growth of red clover, soybean and sorghum, but caused inhibiting effects on orchard grass, brome grass, barley and Hog-millet. 3. Effects of Aqueous Solutions of Excrements : The aqueous solution of excrements of red clover reflected the inhibition effects to the growth of Graminaceae, while the aqueous solutions of excrements of orchard grass and Italian ryegrass caused the promotive effects on the growth of red clover. 4. Results of Organic Acid Analysis : The oxalic acid, citric acid, tartaric acid, malonic acid, malic acid and succinic acid were included in the roots of red clover as unvolatile organic acid, and in the orchard grass and brome grass there were included the oxalic acid, citric acid, tartaric acid and malic acid. And formic acid was confirmed in the red clover, orchard grass and brome grass as volatile organic acid. In consideration of the results mentioned in above the effects of excrements and components of roots found in this studies may be summarized as follows. 1) The red clover generally gave a disadvantageous effect on the Graminaceae. Such trend was considered chiefly caused by the presence of many organic acids, namely oxalic, citric, tartaric, malonic, malic, succinic and formic acid. 2) The orchard grass generally gave an advantageous effect on the Leguminosae. This may be due to a few kinds of organic acid contained in the root, namely oxalic, citric, tartaric, malic and formic acid. Furthermore a certain of promotive materials for growth was noted. 3) As long as the root of brome grass are not rotten, it gave a disadvantageous effect on the Leguminosae and Graminaceae. This may be due to the fact that several unidentified volatile organic acid were also included besides the confirmed organic acid, namely oxalic, citric, tartaric, malic and formic acid. 5. Effects of Components in Roots to the Soil Sickness : 1) It was considered that the cause of alleged red clover's soil sickness did not result from the toxic components of the roots. 2) It was recognized that the toxic components of roots might be the cause of soil sickness in case the orchard grass and brome grass were put into the long-term single cropping. 6. Effects of Rooted Components to the Companion Crops in the Cropping System : a) In case of aqueous extracts of fresh roots and aqueous excrements (Inter cropping and mixed cropping) : 1) Advantageous combinations : Orchard grass->Red clover, Soybean, Italian ryegrass->Red clover, 2) Disadvantageous combinations : Red clover->Ladino clover, Lespedeza, Orchard grass, Italian ryegrass, Fescue Ky-31, Brome grass, Barley, Wheat, Corn and Hog.millet, Orchard grass->Lespedeza, Orchard grass, Barley and Hog-millet, Brome grass->Red clover, Ladino clover, Lespedeza, Soybean, Orchard grass, Brome grass, Barley, Wheat, Sorghum, Corn and Hog-millet, 3) Harmless combinations : Red clover->Red clover, Soybean and Sorghum, Orchard grass->Ladino clover, Italian ryegrass, Brome grass, Wheat, Sorghum and Corn, Brome grass->Italian ryegrass, b) In case of aquecus extracts of rotting roots(After cropping) : 1) Advantageous combinations : Red clover->Red clover and Sorghum, Orchard grass->Red clover, Ladino clover, Soybean, Sorghum, and Corn, Brome grass->Red clover, Soybean and Sorghum, 2) Disadvantageous combinations : Red clover->Lespedeza, Orchard grass, Italian ryegrass, Brome grass, Barley, Wheat, and Hog-millet Orchard grass->Barley and Hog-millet, Brome grass->Orchard grass, Brome grass, Barley and Hog-millet, 3) Harmless combinations : Red clover->Ladino clover, Soybean and Corn, Orchard grass->Lespedeza, Orchard grass, Italian ryegrass, Brome grass and Wheat Brome gass->Ladino clover, Lespedeza, Italian ryegrass and Wheat.

• Economic and Environmental Geology
• /
• v.5 no.4
• /
• pp.187-209
• /
• 1972

Drilling position is one of the most important factors affecting on the blasting effects. There has been many reports on several blasting factors of burn-cut by Messrs. Brown and Cook, but in this study the author tried to compare drilling positions of burn-cut to pyramid-cut, and also to correlate burn-cut effects of drilling patterns, not being dealt by Prof. Ito in his theory, which emphasized on dynamical stress analysis between explosion and free face. According to former theories, there break out additional tensile stress reflected at the free face supplemented to primary compressive stress on the blasting with one-free-face. But with these experimented new drilling patterns of burn-cut, more free faces and nearer distance of each drilling holes make blasting effects greater than any other methods. To promote the above explosive effect rationary, it has to be considered two important categories under-mentioned. First, unloaded hole in the key holes should be drilled in wider diameter possibly so that it breaks out greater stress relief. Second, key holes possibly should have closer distances each other to result clean blasting. These two important factors derived from experiments with, theories of that the larger the dia of the unloaded hole, it can be allowed wider secondary free faces and closes distances of each holes make more developed stress relief, between loaded and unloaded holes. It was suggested that most ideal distance between holes is about 4 clearance in U. S. A., but the author, according to the experiments, it results that the less distance allow, the more effective blasting with increased broken rock volume and longer drifted length can be accomplished. Developed large hole burn-cut method aimed to increase drifting length technically under the above considerations, and progressive success resulted to achieve maximum 7 blasting cycles per day with 3.1m drifting length per cycle. This achievement originated high-speed-drifting works, and it was also proven that application of Metallic AN-FO on large hole burn-cut method overcomes resistance of one-free-face. AN-FO which was favored with low price and safety handling is the mixture of the fertilizer or industrial Ammonium-Nitrate and fuel oil, and it is also experienced that it shows insensible property before the initiation, but once it is initiated by the booster, it has equal explosive power of Ammonium Nitrate Explosives (ANE). There was many reports about AN-FO. On AN-FO mixing ratio, according to these experiments, prowdered AN-FO, 93.5 : 6.5 and prilled AN-FO 94 : 6, are the best ratios. Detonation, shock, and friction sensities are all more insensitive than any other explosives. Residual gas is not toxic, too. On initation and propagation of the detonation test, prilled AN-FO is more effective than powered AN-FO. AN-FO has the best explosion power at 7 days elapsed after it has mixed. While AN-FO was used at open pit in past years prior to other conditions, the author developed new improved explosives, Metallic AN-FO and Underwater explosive, based on the experiments of these fundmental characteristics by study on its usage utilizing AN-FO. Metallic AN-FO is the mixture of AN-FO and Al, Fe-Si powder, and Underwater explosive is made from usual explosive and AN-FO. The explanations about them are described in the other paper. In this study, it is confirmed that the blasting effects of utilizing AN-FO explosives are very good.