• Journal of agriculture & life science
• /
• v.46 no.4
• /
• pp.41-55
• /
• 2012

On the basis of vegetation data collected by point-centered quarter method in analysis in Baekdudaegan of Gangwon province in the area of Hyangrobong, Odaesan, Seokbyeongsan, Dutasan, Deokhangsan and Hambaeksan, the study was carried out to classify forest communities and to evaluate the successional trends. The classification method of cluster analysis was used to make various disordered forests into several common groups for 1,004 sample points all together. By clustering the forests in the six study areas were classified into 28 forest communities, which were subjected to aggregate 8 representative forest communities on the count of species composition and species diversity. They were Mesophytic mixed forest community, others deciduous forest community, Quercus mongolica (dominant) community, Q. mongolica (pure) community, Pinus densiflora - Q. mongolica community, P. densiflora community, Betula ermanii community and Q. mongolica - Pinus koraiensis community. The ecological outlook from the result indicated that P. densiflora community and P. densiflora - Q. mongolica community, which were located in Seokbyeongsan, Dutasan and Deokhangsan around 1,000m above the sea level showed lower species diversity index. On the contrary Mesophytic mixed forest community, others deciduous forest community which was located in Hyangrobong, Odaesan and Hambaeksan mostly in protected area and national park around 1,500m above the sea level displayed higher species diversity index. As the composition ratio of Q. mongolica within a certain community was decreased, the species diversity was generally increased, assumed that abundance of Q. mongolica might be negatively associated with species diversity in the national deciduous forest.

• Korean Journal of Environment and Ecology
• /
• v.6 no.2
• /
• pp.162-167
• /
• 1993

A mixed deciduous forest community in Mt. Sobaek was studied to determine the adequate number of plots of tree stratum for investigating forest community structure. Twenty l0m $\times$ l0m plots were set up iii the studied forest community, and species area curve. performance curve and statistical method were carried out. According to species-area curve, the minimal number of plots where a given percentage increase in number of plots produced less than the same percentage increase in number of species was eight. The minimal number of plots where a given percentage increase in number of plots produced less than the half of the percentage increase in number of plots was eleven. According to performance curve by importance value of the major species, the minimal number of plots where the dominant species was distinguished from the subdominant species was five. The minimal number of plots where the subdominant species was distinguished from each other was ten. Therefore, ten l0m $\times$ l0m plots seems to give an adequate sample for investigating structure of the studied forest community. Similarity index between the ten plots and total twenty plots was above 90%, and 95% confidence interval of species diversity of the ten plots was $\pm$ 0.073.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1161-1161
• /
• 2001

Rapid cost-effective methods of measuring wood quality are extremely important to tree improvement programs where it is necessary to test large numbers of trees. Non-destructive sampling of a forest can be achieved by using increment cores generally removed at breast height. At CSIRO Forestry and Forest Products methods for the rapid, non-destructive measurement of wood properties and wood chemistry based on increment core samples have been developed. In this paper the application of near infrared (NIR) spectroscopy to the prediction of a range solid wood properties, including density, longitudinal modulus of elasticity (E$\sub$L/) and microfibril angle (MFA), is described. Experiments conducted on individual species (Eucalyptus delegatensis and Pinus radiata), the two species combined and a number of mixed species from several genera are reported. NIR spectra were obtained from the radial/longitudinal face of each sample and used to develop calibrations for the measured physical properties. When the individual species were used the relationships between laboratory determined data and NIR fitted data were good in all cases. Coefficients of determination (R$^2$) ranging from 0.77 for MFA to 0.93 for stick density were obtained for E. delegatensis and R$^2$ ranging from 0.68 for MFA to 0.94 for strip density were obtained for P. radiata. The calibration statistics for the combined E. delegatensis and P. radiata samples were similar to those found for the individual species. As these results indicated that it might be possible to produce general calibrations based on samples from a number of species of a single genus or samples from a number of different genera, a wide range of species was subsequently tested. Good relationships were obtained for both density and E$\sub$L/. These calibrations had R$^2$ that were slightly lower than those determined using individual species and standard errors that were higher. The mixed species calibrations, when applied to the E. delegatensis and P. radiata sample sets, provided good estimates of density (stick and strip) and E$\sub$L/. The results demonstrated that a mixed species calibration, that encompasses wide variation in terms of, wood anatomy, chemistry and physical properties, could be used to rank trees. Experiments reported in this paper demonstrate that solid wood properties can be estimated by NIR spectroscopy. The method offers a rapid and non-destructive alternative to traditional methods of analysis and is applicable to large-scale non-destructive forest resource assessment, and to tree breeding and silvicultural programs.

• Journal of Korean Society of Forest Science
• /
• v.111 no.1
• /
• pp.136-149
• /
• 2022

In this study, the performance of a nonlinear mixed-effects (NLME) model used to estimate the stem taper of Pinus densiflora in Gangwon Province was compared with that of a nonlinear fixed-effects (NLFE) model using several performance measures. For the diameters of whole tree stems, the NLME model improved on the performance of the NLFE model by 26.4%, 42.9%, 43.1%, and 0.9% in terms of BIAS, MAB, RMSE, and FI, respectively. For the cross-section areas of whole tree stems, the NLME model improved on the performance of the NLFE model by 67.7%, 44.7%, 45.8%, and 1.0% in terms of BIAS, MAB, RMSE, and FI, respectively. Based on the analysis of 12 relative height classes of tree stems, stem taper estimation performance was also reasonably improved by the NLME model, which showed better MAB, RMSE, and FI at every relative height class compared with those of the NLFE model. In some classes, the NLFE model had better BIAS than the NLME model (stem diameter: 0.05, 0.2, 0.3, and 0.8; stem cross-section area: 0.05, 0.3, 0.5, 0.6, and 1.0). However, the NLME model enhanced the performance of stem diameter and cross-section area estimations at the lowest stem part (0.2 m from the ground). Improvements for stem diameter in terms of BIAS, MAB, RMSE, and FI were 84.2%, 69.8%, 68.7%, and 3.1%, respectively. For stem cross-section areas, the improvements in BIAS, MAB, RMSE, and FI were 98.5%, 70.1%, 68.7%, and 3.1%, respectively. The cross-section area at 0.2 m from the ground occupied 22.7% of total cross-section area. Improvements in estimation of cross-section area at the lowest stem part indicate that stem volume estimation performance could also be enhanced. Although NLME models are more difficult to fit than NLFE models, the use of NLME models as a standard method for the estimating the parameters of stem taper equations should be considered.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1112-1116
• /
• 2009

The importance of securing water resources and their efficient management has attracted more attention recently due to water deficit. In water budget analysis, however, evapotranspiration (${\lambda}E$) has been approximated as the residual in the water balance equation or estimated from empirical equations and assumptions. To minimize the uncertainties in these estimates, it is necessary to directly measure ${\lambda}E$. In this study, using the eddy covariance technique, we have measured ${\lambda}E$ in a mixed forest in the Seolmacheon catchment in Korea from September 2007 to December 2008. During the growing season (May - July), ${\lambda}E$ in this mixed forest averaged about 2.2 mm $d^{-1}$, whereas it was on average 0.5 mm $d^{-1}$ during the non-growing season in winter. The annual total ${\lambda}E$ in 2008 was 581 mm $y^{-1}$, which is about 1/3 of the annual precipitation of 1997 mm. Despite the differences in the amount and frequency of precipitation, the accumulated ${\lambda}E$ during the overlapping period (i.e., September to December) for 2007 and 2008 was both ${\sim}$ 110 mm, showing virtually no difference. The omega factor, which is a measure of decoupling between forest and the atmosphere, was on average 0.5, indicating that the contributions of equilibrium ${\lambda}E$ and imposed ${\lambda}E$ to the total ${\lambda}E$ were about the same. The results suggest that ${\lambda}E$in this mixed forest was controlled by various factors such as net radiation, vapor pressure deficit, and canopy conductance. In this study, based on the direct measurements of ${\lambda}E$, we have quantified the relative contribution of ${\lambda}E$in the water balance of a mixed forest in the Seolmacheon catchment. In combination with runoff data, the information on ${\lambda}E$ would greatly enhance the reliability of water budget analysis in this catchment.

• Journal of Korea Water Resources Association
• /
• v.54 no.11
• /
• pp.875-889
• /
• 2021

This study compares and analyzes the Soil and Water Assessment Tool (SWAT) and Terra MODIS (Moderate Resolution Imaging Spectroradiometer) as coniferous, deciduous and mixed forest with Yongdam Dam upstream (904.4 km²). The hydrologic evaluation period was set to 10 years from 2010 to 2019, and the applicability of the 8-day MOD15A2 Leaf Area Index (LAI) data, 3 TDR (Time Domain Reflectometry) (GB, JC, CC), and 1 Flux Tower (DU) evaporation volume (YDD) data was simulated. As a result, the R² of coniferous forest, deciduous forest and mixed forest are 0.95, 0.89, 0.90, soil moisture and evaportranspiration stations R² were analyzed at 0.50 to 0.55 and 0.51, respectively, with R² at 0.74, RMSE 2.75 mm/day, NSE 0.70 and PBIAS 14.3% for Yongdam inflow. Based on the calibrated and validated watersheds, the annual average evaportranspiration was calculated as coniferous 469.7 mm, deciduous 501. mm and 511.5 mm mixed forest, total runoff were estimated at coniferous 909.8 mm, deciduous 860.6 mm and 864.2 mm mixed forest. In the case of annual average evaportranspiration, it was evaluated that deciduous were high, but in the case of streamflow, it was evaluated that coniferous were high. Unlike other hydrologic with similar patterns throughout the year, the average annual evapotranspiration was about 7% higher than coniferous due to the higher evapotranspiration of deciduous with high leaf area index in summer and fall. In addition, deciduous were 9% and 6% higher for surface runoff and lateral flow, but the groundwater of coniferous was 77% higher. Therefore, it was confirmed that the total runoff was in order of coniferous, mixed forest, and deciduous.

• Journal of Forest and Environmental Science
• /
• v.30 no.4
• /
• pp.362-369
• /
• 2014

This study investigated physical properties and combustion gas characteristics for 8 types of wood pellets (4 domestic and 4 imported products) distributed in the domestic market. Results showed that most pellet types were first-grade pellets in the wood pellet quality standards in Korea with the exception of 3 pellet types from K company (second-grade in mechanical durability), G company (off-grade in nitrogen content) and P company (second-grade in ash percentage). Mixed pellets which contained more lignin and sap content were higher in mechanical durability (%) than that of white pellets. From the combustion gas analysis results, NOx emitted from all pellets combustion was at acceptable levels for national emission standard of the Clean Air Conservation Act except for pellets from G company. In addition, CO levels from all types of wood pellets were acceptable except for pellets from D company and domestic pellets were higher CO levels than imported pellets. These results indicate the higher CO levels in domestic pellets due to the usage of forest thinning materials including logging debris which usually had the high content of bark.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.15 no.6
• /
• pp.43-52
• /
• 2012

For this paper, a study targeting 9 forest patches in Dangjin to suggest for the wild birds, was conducted. The correlation between the emergence of wild birds and the forest vegetation was analyzed, and the patterns of forest vegetation for the improvement of species diversity were suggested by classifying wild birds and foraging guild by the type of forest vegetation. As for the characteristics of the wild birds emerged, more species and bigger population appeared in the vegetation type of mixed stand forest where the natural deciduous broadleaf trees and evergreen needleleaf trees coexisted in the large scale vegetation area. Thus, it was known that the advent of summer migratory birds and resident birds were affected the most by forest patches and vegetation types. As for foraging guild, the larger the forest paches the more the species and the population of the wild birds inhabiting in shrubs and bushes.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.5 s.118
• /
• pp.38-46
• /
• 2006

Many researches for extensive uses of Hanji have been performed. With the advent of an information-oriented age, the development of Hanji which is printable has been considered as a new field of study. Since Hanji has many drawbacks in comparison with common printing papers, that is, rougher surface, huger absorption of ink and lower physical properties and printabilities. Improving the properties and printabilities of Hanji is therefore the most important work to deal with. This study was conducted to find out useful mixed agents for surface sizing suitable for printable Hanji. Four surface sizing agents (CMC, corn starch, PYA, AKD) were applied for mixture in this study. The physical properties of surface sized Hanji were measured. Results obtained were as follows. Based on designated agents according to concentration, each of the mixed agents was prepared. The kinds of mixture were corn starch (3%) and PVA (5%), corn starch (3%) and AKD (0.1%), corn starch (3%) and CMC (1%), AKD (0.1%) and CMC (1%), AKD (0.1%) and PVA (5%), CMC (1%) and PVA (5%). Each mixed surface sizing agents was included with these ratios (100:0, 90:10, 70:30, 50:50, 30:70, 10:90, 0:100) respectively. All the mixed agents improved the physical properties and printabilities of Hanji. Among them, mixed agent of CMC (1%) and corn starch (3%) with 90:10 ratio is superior to the others for not only smoothness but also ink printability. In view of the result achieved, it is regarded that it can be fit for using Hanji as a printing paper and turned out to be a good contribution to Hanji industry.

• Journal of Forest and Environmental Science
• /
• v.30 no.1
• /
• pp.133-144
• /
• 2014

This study was carried out to review the pattern of forest stand development for six Gangwondo Baekdudaegan Mountains which experienced different type and duration of intensive legal protection. Vegetation data from point sampling method were employed to classify community types by cluster analysis on the basis of the importance values of canopy tree species for the study areas. The names of classified communities were given by the composition of dominant tree species. The communities were also compared one another in terms of stand structure by species diversity index. The results indicated that National Parks (Seoraksan and Odaesan) had greater proportion of mixed mesophytic forest type which was supposed to progress further forest succession process so as to have more complex and diversified stand structure. On the other hand, ordinary forest areas (Seokbyeongsan and Deokhangsan) had greater proportion of the forest types which was dominatively composed of Quercus mongolica and Pinus densiflora. The forest types with large amount of these two species would tend to develop for relatively short period of time of 40-50 years after artificial disturbances. Hyangnobong of Natural Protection Area and Hambaeksan of Natural Ecosystem Conservation Area showed intermediate stand development pattern in between National Parks and ordinary forest areas. The period of intensive legal protection of the forest area was positively correlated with species diversity index (R=0.736), and noted that the forest which received intensive protection regulation for longer period tended to show more complex and diversified stand structure.