• Advances in Energy Research
• /
• 제5권4호
• /
• pp.277-287
• /
• 2017

This study examines the risk of overheating of a school building, under extreme hot weather conditions, in 14 locations in the United Kingdom using the overheating criteria defined in Building Bulletin 101 (BB101). The building was modelled as naturally ventilated, mechanically ventilated and in mixed mode and was simulated both for the current and the projected weather conditions of the 2050s. Under the current weather conditions, results of the simulations show that when naturally ventilated, the school building fulfils the BB101 criteria only in the areas of Edinburgh and Glasgow. In the simulations of the building as mechanically ventilated and in mixed mode, mechanical cooling was provided in order for the building to comply with the overheating criteria. A comparison of the required cooling loads between the two scenarios shows that application of mixed mode ventilation results in less cooling loads.

• Steel and Composite Structures
• /
• 제1권2호
• /
• pp.159-170
• /
• 2001

The Millennium Tower is situated to the north of the center of Vienna. With a height of 202 m it is the highest building in Austria. Realization was improved by new methods. The tower is a typical example of mixed building technology, combining composite frames with a concrete core. Special attention has been paid to the moment connections between the slim floors and the column tubes resulting in a drastically reduced construction time and thin slabs. The semi-continuity has been considered in the design at ultimate and serviceability limit states.

• 한국건축시공학회지
• /
• 제14권1호
• /
• pp.11-20
• /
• 2014

This research examined the effect of the quality of aggregate on concrete workability and compressive strength through an investigation into regional aggregate used in domestic ready mixed concrete plants. Through the research, it was found that aggregate for ready mixed concrete shows poor quality overall. The main factor of deterioration in the quality of the concrete is the particle size of fine aggregate and fine particle content in coarse aggregate. The quality of aggregate significantly influences concrete's workability, which is defined based on 0.08mm passage related with powder and absorption. In addition, poor aggregate quality leads to increased water content in concrete to secure workability, which is related with a decline in the compressive strength and durability of concrete.

• Steel and Composite Structures
• /
• 제3권2호
• /
• pp.141-152
• /
• 2003

The ski jump in Innsbruck known for the famous annual New Year "Four-ski-jump-tournament" has been fully renewed. The original jumping tower (built for the 1976 Olympic winter games) was fully pulled down and a new landmark similar to a lighthouse has been erected located on a small hill at the border of the city. Zaha Hadid(London) won the international architectural competition for this significant building. The constructional realisation has been ordered from Aste Konstruktion and has been finally honoured with the Austrian state award for consulting 2002. After a very strict timetable the building was already handed restaurant at the top.

• 한국태양에너지학회 논문집
• /
• 제26권4호
• /
• pp.9-16
• /
• 2006

Geothermal-energy has been getting popular as a natural energy source for green buildings these days. Public building with gross area more than $3000m^2$, planned after March, 2005, should spend about 5% of total building cost for equipment run by natural energy source (e.g. geothermal, solar heat, solar power, etc) according to renewable energy promotion law in Korea. As a result geothermal-energy using heat pump system is emerging as a effective alternative for realistic and economic plan although design guidelines and construction code for the system is in progress and technical data is far from sufficient. The quantitative analysis on the performance of geothermal-energy using heat pump system is insufficient for appropriate design of it. In this paper, cooling performance of geothermal-energy using heat pump system of residential and retail etc. mixed-use building has been analyzed on the basis of temperature comparison between inlet and outlet of heat exchangers of the operating system. Additionally, dry-bulb temperature and relative humidity have been measured and analyzed together as an index of indoor thermal environment.

• 한국건설순환자원학회논문집
• /
• 제9권4호
• /
• pp.483-491
• /
• 2021

본 연구는 순환골재의 고품질 사용 활성화를 위해 품질확보 기술의 뒷받침을 전제로 하여 순환골재의 활용에 따른 건설산업의 경제적 효과 및 순환골재 생산 산업의 가치 증대 영향을 분석을 목적으로 한다. 이에 고품질 순환골재 활용을 통해 얻을 수 있는 레미콘 생산비용을 순환골재 품질기준에서 권고한 순환골재 적용 비율에 따라 분석하고, 국내 레미콘 산업규모와 순환골재 물량 충족률을 파악하여 일반레미콘과 순환골재 적용 레미콘 산업의 경제적 효과를 분석하였으며, 비용 편익 분석법을 활용하여 고품질의 순환골재 생산 및 판매에 따른 편익을 검토하였다. 그 결과 레미콘 생산비용은 적용 비율에 따라 2.3~16.2%의 절감효과를, 순환골재 활용에 따른 건설 산업의 경제적 효과는 약 1,068~1,426억 수준을, 순환골재 생산 산업의 가치 증대 영향은 약 1.22배 편익을 발생시켰다.

• 터널과지하공간
• /
• 제31권6호
• /
• pp.549-560
• /
• 2021

쉴드 TBM(Tunnel Boring Machine) 굴진 시 TBM에 작용하는 커터헤드 토크, 추력, 챔버압, 상향력 등은 TBM의 굴진성능을 결정하는 데 매우 중요한 요소들이다. 그러나 균질한 지반 조건에 비해 복합지반을 굴진할 때 TBM에 작용하는 힘들은 그 경향이 달라 TBM 굴진성능을 저해할 수 있다. 따라서 본 연구에서는 복합지반 굴진이 TBM에 작용하는 토크, 추력, 챔버압, 상향력에 미치는 영향을 수치해석적으로 모사하고자 하였다. 해석 모델은 개별요소법(DEM, discrete element method)과 유한차분법(FDM, finite difference method)을 연계하는 방안을 적용한 TBM 굴진 모델을 사용하였다. 본 연구에서는 상부 화강풍화토와 하부 풍화암으로 구성된 복합지반을 굴진하는 것을 가정하여 굴진을 모사하였으며, 복합지반 경계면의 위치, 경사에 따라 TBM에 작용하는 힘에 대한 영향을 해석적으로 분석하였다.

• 한국수자원학회논문집
• /
• 제53권3호
• /
• pp.167-179
• /
• 2020

최근 바이오폴리머 소재를 이용하여 자연 흙의 강도와 식생의 생장을 증진하는 새로운 제방 소재가 개발되었다. 본 연구에서는 바이오폴리머 혼합토를 친환경 제방 재료로 활용하기 위해 혼합토로 조성된 식생 매트의 한계 소류력을 평가하였다. 혼합토는 베타글루칸을 주재료로 모래와 황토를 혼합하여 조성하였다. 실규모 시험체를 제작하여 혼합토를 3 cm 도포하였으며 식생과 매트를 이용하여 4개의 시험체를 제작하였다. 실규모 실험에 의해 손상과 토양유실을 관측하여 한계 소류력을 결정하였다. 식생 호안의 특성상 식생의 피복도에 따라 영향을 받기는 하지만 식생이 활착된 경우 개략적으로 한계소류력 42 N/㎡, 한계유속 4 m/sec을 실험을 통해 확인하였다. 또한 매트공법이 적용된 경우에는 뿌리와 매트의 결합으로 침식저항성이 강화됨을 확인하였다.

• 건축역사연구
• /
• 제15권2호
• /
• pp.77-94
• /
• 2006

"Mixed construction of platform" means the platform which was constructed by mixing heterogeneous materials such as roof tiles or bricks with divided stone of trimmed stone. This kind of construction technique was not known or found from the building sites of Goguryo or Silla so far and therefore it used to be understood as a unique platform construction technique or the product of technology and creativeness of Baikje's craftsman. The mixed construction of platform of Baikje came to position itself as one of the patterns of platform mainly used over Sabi period and we found the pattern from the sites including Imryugak site in Gongju, temple for royal tomb in Gwanbuk-ri, Wangheungsa Temple site, building site in Keumseong Mountain, Ohapsa Temple site in Byryeong. From the fact that they used a variety of materials which they could easily get around them such as roof tiles or bricks in addition to stones for the construction of platforms, we can see the feasibility and decoration characteristics of their material supply at that time. On the other hand, this mixed construction of platform was not popular in Goguryo and Silla, the major reason for which is judged to be non-existence of platforms to construct using bricks or roof tiles which could be constructed together with platform using divided stones. This is supported by the results of excavation of Hwangryongsa Temple site, Bunhwangsa Temple site, Heungryunsa Temple site of Silla which gave us comparatively abundant excavation data, and Jeongreungsa Temple site, Cheongamsa Temple site, Toseongrisa Temple site and building site in Daeseong Mountain castle and Anhak Palace site of Goguryo. For further progressive study on the mixed construction of platform of Baikje in the future, we will have to review more on the social background and technical background with the linkage with archeology and architecture at that time which led to the creation of such platform.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.241-242
• /
• 2019

This technology is a water leak repair technology using composite materials of concrete structures that block leakage of structures by injecting rapid microcement into the face of underground concrete to block water and injecting flexible glycidylacrylate. Rapid micro cement system repair materials are mixed with fine fibers to improve the flexural sensitivity of the material and to form a layer that blocks stabilized water at the back of the structure by allowing rapid and tight spatial filling during injection with high cohesion The glycidylacrylate repair material can control the expansion rate, and the external stress also has the characteristic that the form of the material is not destroyed or separated, which can also be applied to vibrating induced structures that produce repetitive fatigue loads, and has an effective durability in saline, alkali, acid (chloric acid, sulfuric acid, nitric acid).