• Research in Community and Public Health Nursing
• /
• v.30 no.4
• /
• pp.414-425
• /
• 2019

Purpose: The purpose of this study was to examine the effects of psychosocial wellbeing status and self efficacy on health-promoting behavior of nursing students, and to explore the experiences related to health-promoting behavior. Methods: For this study, an explanatory sequential mixed method design approach was used with survey data collected from 148 nursing students. In addition, qualitative data for exploration of health-promoting behavior experience were collected from three focus-group interviews of 17 participants. Quantitative data were analyzed with SPSS/WIN 25.0 and qualitative data were analyzed by making contents analysis with Nvivo 12.0. Results: The results showed that psychosocial wellbeing status, self efficacy, grade, and regularity meal explained 43.0% of the variance in health-promoting behavior. And seven themes from the collected significant statements about experience of health-promoting behavior included the daily life going on without delay; changes in body which is felt; recognizing the necessity of health care; making efforts to increase physical activities; revising eating habit; looking for the way to relieve stress; and attempting to divert my thoughts. Conclusion: Based on the results of this study, it is necessary to develop and verify health program in order to improve nursing students' health-promoting behavior. And university authorities and government should make an effort to improve nursing students' health-promoting behavior.

• Tribology and Lubricants
• /
• v.25 no.1
• /
• pp.66-72
• /
• 2009

Al-based composites reinforced with SiC particulate were fabricated using a thermal spray process, and dry sliding wear behavior of the composites was investigated. Pre-mixed Al and SiC powders were sprayed on an A16061 substrate by flame spraying, and dry sliding wear test were performed under various sliding speed and applied load conditions against ${Al_2}{O_3}$ ball. Wear behavior of the composites was studied by using scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDX) and X-ray diffraction (XRD). And build-up mechanism of MML on the worn surface of the composites was examined. It was revealed that these MML was formed of debris from the contact surface of the composites and effected to wear behavior of the composites protecting the contact surface of the composites.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.4
• /
• pp.474-482
• /
• 2006

Generally almost all fatigue crack growth is affected by mode I. For this reason a study on mode I has concentrated in the field of fracture mechanics. However the fatigue crack initiation and growth in machines and structures usually occur in mixed mode loading. If there is any relationship between the cause of fracture in mixed mode loading and fracture surface, fracture surface pattern will be the main mean explaining reasons of fatigue fracture and obtaining further information about fracture process. In this paper low point shear-fatigue test with Aluminum alloy hi 5083-O is carried out from this prospect and then the mixed mode distribution of fracture surface is examined from the result after identifying the generation of fatigue crack surface pattern. It was found from the experimental results that the fatigue crack surface pattern and the fatigue crack shear direction are remarkably consistent. Furthermore It is possible that the analysis of distribution of mixed mode through the fatigue crack surface pattern.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.43-44
• /
• 2006

Generally almost all fatigue crack growth is affected by model. For this reason a study on model has concentrated in the field of fracture mechanics. However the fatigue crack initiation and growth in machines and structures usually occur in mixed mode loading. If there is any relationship between the cause of fracture in mixed mode loading and fracture surface, fracture surface pattern will be the main mean explaining reasons of fatigue fracture and obtaining further information about fracture process. In this paper four point shear-fatigue test with Aluminum alloy Al 5083-O is carried out from this prospect and then the mixed mode distribution of fracture surface is examined from the result after identifying the generation of fatigue crack surface pattern. It was found from the experimental results that the fatigue crack surface pattern and the fatigue crack shear direction are remarkably consistent. Furthermore It is possible that the analysis of distribution of mixed mode through the fatigue crack surface pattern.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.12
• /
• pp.21-29
• /
• 2019

The purpose of the study is to be the pedestrian integrated circulation system of malling route and the third route in Mixed-use Building based on User Behavior. The study has performed by the following approaches: Initially, literature reviews are performed related to a pedestrian route by user in mixed-use building. Second, general and stroller users moving route are analyzed based on the outcome of the case study. Finally, the study develops the efficient pedestrian integrated circulation system of malling route and the third route in Mixed-use Building. According to the study, the following conclusions were made: First, An integrated plan for escalators and EVs, which are accessible to both users and strollers, is needed. Second, The entrance automatic door and circulation elements should be connected for continuous move by the stroller users. Finally, The circulation system of complex buildings should be a simple spatial structure and route plan that users can easily recognize.

• 한국연소학회:학술대회논문집
• /
• 2003.05a
• /
• pp.65-73
• /
• 2003

An experimental study on flame lift-off characteristics of propane jet flame highly diluted with nitrogen has been conducted introducing acoustic forcing with a tube resonant frequency. A flame stability curve is attained according to forcing strength and nozzle exit velocity for $N_2$ diluted flames. Flame lift-off behavior with forcing strength and nozzle exit velocity is globally categorized into three; a well premixed behavior caused by a collapsible mixing for large forcing strength, a coexistent behavior of well-premixed and edge flames interacting with well-organized inner fuel vortices for moderate forcing strengths, and edge flame behavior for small forcing strengths. Special focus is concentrated on the coexistent behavior of the flame base in lifted flame since this may give a hint to a possibility which the flame base behaves like a well-mixed premixed flame in highly turbulent lifted flames. It is also shown that the acoustic forcing to self-pulsating laminar lifted flame affects flame lift-off behavior considerably which is closely related to downstream flow velocity, mixture strength, effective fuel Lewis number, and flame stretch.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.4
• /
• pp.13-20
• /
• 2005

In this study, consolidation test and numerical analysis were performed with the aim of investigating the characteristics of consolidation behavior of mixed soil with the amount and particle shape of inserted materials. Mixed soil was made up of matrix (dredged clay) and inserted material (crashed oyster shell and/or sand). The concept of stress share ratio was introduced to evaluate the consolidation characteristics of mixed soils. And the finite differential numerical analysis was carried out by applying the Mikasa's consolidation theory. From the results of experiments and numerical analysis, it was verified that mixed soil consolidation behavior is affected by changes in inserted material. When a similar amount of granular material was inserted, the compressibility of the clay matrix of oyster shell mixed soil was smaller than that of sand mixed soil.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.6
• /
• pp.113-123
• /
• 2012

The technology developed for the decrease of applying loads and self-weight of a structure is to improve conventional Foam Cement Banking Method (FCB) by applying mixed slurry of bottom ash, cement and foams. Since the foam-mixed concrete, which is a major material of the Bottom ash-mixed Light weight concrete Banking method (BLB) developed, contains mineral admixture such as cement, the behavior shows time-dependent deformation and deterioration of durability due to environmental exposure. Thus, this study is subject to figure out the characteristics of long-termed behavior and durability of the developed method by carrying out experiments for schemed parameters, which are considered to be factors affecting mainly on concrete's characteristics from mechanical analysis. As results of tests, it was found that the developed concrete offers higher resistance than conventional foamed concrete in terms of long-termed behaviors associated with drying shrinkage and creep, and durability problems of freeze-thaw and carbonation processes, especially with addition of bottom ash.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.2
• /
• pp.45-52
• /
• 2011

To improve fire-resistance of a high strength concrete against spalling under elevated temperature, fibers can be mixed to provide flow paths of evaporated water to the surface of concrete when heated. In this study, the experiment of a column under fire and mechanical loads is conducted and the material model for predicting temperature of reinforcement steel bar and mechanical behavior of fiber-mixed high strength concrete is suggested. The material model in previous studies is modified by incorporating physical behavior of internal concrete and thermal characteristics of concrete at the elevated temperature. Thermo-mechanical analysis of the fiber-mixed high strength concrete column is conducted using the calibrated material model. The performance of the proposed material model is confirmed by comparing thermo-mechanical analysis results with the experiment of a column under fire and mechanical loads.

• Smart Media Journal
• /
• v.11 no.9
• /
• pp.81-93
• /
• 2022

In an era where non-face-to-face meetings become common, eXtended Reality(XR) is rapidly developing and filling areas that are not satisfied in online meetings based on existing photos/video method. In particular, general users are also able to easily access and use HMD-type mixed reality devices. However, the basic operations applied in HMD-type in Mixed Reality(MR) with hands as the main input tool do not have a standardized system, and each manufacturer operates in a separate response to each other's hand movements. Therefore, this study considered that a systematic hand motion matching system considering the usability and efficiency of operations performed in mixed reality was necessary, and conducted a study to clarify this. First, the basic operation performed in the MR environment and its attributes were investigated, and at the same time, the structure of the hand and the attributes of the possible hand movements were identified. Based on the identified properties, it is intended to present a system that can intuitively and efficiently match basic operation properties in the MR environment with subtle operation properties according to the structure/context of the hand.