• Smart Structures and Systems
• /
• 제29권4호
• /
• pp.589-598
• /
• 2022

Timber structures are susceptible to structural damages caused by variations in moisture content (MC), inducing severe durability deterioration and safety issues. Therefore, it is of great significance to detect MC levels in timber structures. Compared to current methods for timber MC detection, which are time-consuming and require bulky equipment deployment, Lead Zirconate Titanate (PZT)-enabled stress wave sensing combined with statistic machine learning classification proposed in this paper show the advantage of the portable device and ease of operation. First, stress wave signals from different MC cases are excited and received by PZT sensors through active sensing. Subsequently, two non-baseline features are extracted from these stress wave signals. Finally, these features are fed to a statistic machine learning classifier (i.e., naïve Bayesian classification) to achieve MC detection of timber structures. Numerical simulations validate the feasibility of PZT-enabled sensing to perceive MC variations. Tests referring to five MC cases are conducted to verify the effectiveness of the proposed method. Results present high accuracy for timber MC detection, showing a great potential to conduct rapid and long-term monitoring of the MC level of timber structures in future field applications.

• 대한환경공학회지
• /
• 제32권9호
• /
• pp.809-817
• /
• 2010

온실가스 감축을 위해서는 배출활동을 억제하거나 배출집약도를 개선시키는 다양한 기술의 도입의 개발 보급을 촉진하는 정책의 도입이 필수적이다. 이처럼 온실가스의 저감을 위한 다양한 정부개입을 '기후정책'이라 하는데, 그 이론적 속성과 더불어 각 국가 고유의 상황에 따라 정책의 상대적 유효성이 결정된다. 온실가스 배출분석은 일정 기간에 국가 전체의 온실가스 배출을 전망하고, 이를 기초로 다양한 기후정책의 온실가스 감축효과를 평가하는 과정이다. 배출분석은 국가 온실가스 배출에 대한 기준년도 배출량 산정, 목표 시점까지의 배출추이에 대한 기준 배출량, 그리고 이러한 미래 배출량에 변화를 초래하는 다양한 기후정책 시나리오에 대한 평가 등으로 구성된다. 본 논문에서는 다양한 기후정책의 유형과 그 평가 선택기준을 고찰하는 한편, 우리나라의 온실가스 배출추이와 부문별 감축여건을 분석하였다. 이러한 연구는 우리나라의 국가 온실가스 감축목표 설정 및 기후정책 운용에 있어서 유용한 기반을 제공할 것으로 기대된다.

• Earthquakes and Structures
• /
• 제2권1호
• /
• pp.1-24
• /
• 2011

During very strong earthquakes, seismically isolated buildings may experience large horizontal relative displacements, which may lead to poundings if an insufficiently wide clearance is provided around the building. This paper investigates, through numerical simulations, the effectiveness of using rubber bumpers, which could be attached at locations where it is likely to have impacts, in order to act as shock-absorbers. For the simulation of the dynamic behavior of such rubber bumpers during impacts, a nonlinear force-based impact model, which takes into account the finite thickness of the rubber bumpers, has been developed. Subsequently, a series of parametric analyses are performed to assess the effect of the gap size, the earthquake characteristics and the thickness, compressive capacity and damping of the bumpers. The stiffness of the moat wall is also parametrically considered during poundings of a seismically isolated building, as another potential mitigation measure for poundings of seismically isolated buildings.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2009년도 정기 학술발표대회
• /
• pp.69.1-69.1
• /
• 2009

• 해양환경안전학회지
• /
• 제26권3호
• /
• pp.227-232
• /
• 2020

This paper develops a risk index based on an indicator of risk assessment in terms of coastal activity location and accident type. The risk index is derived from a formula which adds the consequence of failure to a vulnerability value, then subtracts the mitigation value. Specifically, the consequence of failure is the number of casualties in coastal activity locations. An indicator of vulnerability refers to coastal environment elements and social elements. A pointer of mitigation includes managerial and organizational elements that indicate the capabilities of coastal activities. A risk rating of coastal activity location is found from a risk matrix consisting of the accident location and type. The purpose of this study is to prevent accidents at coastal activity locations by allowing the Coastal police guard to monitor effectively and inform visitors of potential risks.

• 한국지진공학회논문집
• /
• 제2권3호
• /
• pp.13-26
• /
• 1998

In view of the rapid development of economics and technology, perilous meteorological and geological conditions often cause natural disasters and result in severe loss of lives and properties in Taiwan. To promote multi-hazard mitigation strategies in an integrated a, pp.oach, the National Science Council established a National Science and Technology Program for Disaster Mitigation in January 1998. This program emphasizes on the implementation of research results in the National Disaster Management System. This paper describes the earthquake loss estimation methodology that is currently developed in Taiwan. Topics of potential earth science hazards (PESH) and building vulnerability analysis are described in detail.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.52-55
• /
• 2006

It's used to be said that tsunami is a rare event. The recurrence time of tsunami in Sumatra area is approximately 230 years as CalTech Research Group‘s study from paleocoral. However, the tsunami occurred in Indian Ocean on 26 December 2004, 28 March 2005 and 17 July 2006, because the earthquakes still release the energy. To cope with the tsunami disaster, we have to put the much effort on better disaster preparedness. The Tsunami Reduction Of Impacts through three Key Actions (TROIKA) was suggested by Eddie N. Bernard, the director of NOAA/PMEL (Pacific Marine Environmental Laboratory). They are Hazard Assessment, Mitigation and Warning Guidance. The satellite remote sensing has potential on these actions. The medium and high resolution satellite data were used to assess the degree of damage at the six-damaged provinces on the Andaman seacoast of Thailand. Fast and reliable interpretation of the damage by remote sensing method can be used for inundation mapping, rehabilitation and housing plans for the victims. For tsunami mitigation, the satellite data can be used with GIS to construct the evacuation map (evacuation route and refuge site) and coastal zone management. It is also helpful for educational program for local residents and school systems. Tsunami is a kind of ocean wave, therefore any satellite sensors such as SAR, Altimeter, MODIS, Landsat, SPOT, IKONOS can detect the tsunami wave in 2004. The satellite images have shown the characteristics of tsunami wave approaching the coast. For warning, satellite data has potential for early warning to detect the tsunami wave in deep ocean, if there are enough satellite constellation to monitor and detect the first tsunami wave like the pressure gauge, seismograph and tide gauge with the DART buoy can do. Moreover, the new methods should be developed to analyse the satellite data more faster for early warning procedure.

• 경영과학
• /
• 제32권3호
• /
• pp.1-12
• /
• 2015

This study aims to analyze the efficiency of the government policy of Nanotechnology which is expected to minimize nanotechnology's potential risk, using the methodology of conjoint analysis and market share analysis. The attributes of conjoint analysis were divided into potential risk factor and the policy factor. It was found that the policy factor could alleviate the potential risk, subsequently increasing consumers' utility. Additionally, the government certification was more powerful than the mandatory labelling. The market share also increased in result of the nanotechnology-applied product with the certification or labeling either. The result of this study can be used as a reference to related policy makers in the fields of Nanotechnology.

• 한국환경복원기술학회지
• /
• 제10권6호
• /
• pp.99-109
• /
• 2007

The main objectives of this comparative study were 1) to compare the floristic similarity of species composition between the extant vegetation and seedlings from soil seed bank and 2) to quantify the potential contribution of soil seed bank to revegetation of forest in a constructed area, which is called "ecological impact mitigation" in conjunction with the power plant extension. Forest topsoil of seven plots was collected from the surface soil after measurements were taken on the ground vegetation in each plot. A greenhouse experiment was conducted and monitored to analyze the germination potential of soil seed bank. The forest topsoil was spread on plastic trays ($0.7m^2{\times}7$) filled with a 5cm layer of sterilized potting mix. The results of monitoring for 2 years in a greenhouse were as follows : 1) seedlings of soil seed bank per 4.9$m^2$ were 1,269 with 36 species (1st year) and 2,615 with 25 species (2nd year). 2) 38${\pm}$8% of the flora species were germinated from soil seed bank. It can be concluded that the use of soil seed bank would be effective to promote establishment of diverse species and vegetation. However, it behooves to continue monitoring on succession of vegetation and pursue revegetation with other methods for ecological restoration. Finally, adequate topsoil deposit and gathering methods should be studied properly.

• 국제학술발표논문집
• /
• The 8th International Conference on Construction Engineering and Project Management
• /
• pp.103-113
• /
• 2020

The construction industry is undergoing a digital transformation in which Building Information Modelling (BIM) is a key technology. The potential of BIM in several areas such as design optimization, time management, cost management, and asset management/facility management (AM/FM) is widely acknowledged by the AECO (Architecture, Engineering, Construction, and Operation) industry around the world. However, BIM implementation in construction projects is faced with problems such as project delay and cost overruns. The lack of identification of risks in BIM projects and standard guidelines on mitigation techniques furthers poor performance, dissatisfaction, and disputes between employers and project participants, which results in low BIM adoption rates. Therefore, the objective of this paper is to identify the potential risks in BIM implementation under the primary categories - (1) technical, (2) contractual, (3) management-related, and (4) personnel-related risks in BIM projects and present solutions to reduce, manage, and mitigate risks. To meet the objective of this paper, a survey was designed and conducted in the Hong Kong construction industry in which over 140 respondents from different disciplines, with experience in BIM projects, have participated. Based on the analysis of the survey data, the most severe and frequently occurring BIM risks and their potential mitigation strategies were identified and discussed in this paper.