• 제목/요약/키워드: mitigation potential

검색결과 304건 처리시간 0.028초

지진을 고려한 비탈면 설계 방안 (Earthquake Resistant Design Methods on the Slopes)

  • 김주형;이용수;조삼덕
    • 한국방재학회 논문집
    • /
    • 제5권1호
    • /
    • pp.23-32
    • /
    • 2005
  • 1995년 일본 고베 대지진 발생 이후 한국정부는 국내 시설물에 대한 내진설계분야 및 지진피해 최소화 방안에 대한 연구를 지속적으로 진행해왔으며, 현재까지 괄목할 만한 많은 성과를 내고 있다. 그렇지만, 국내비탈면과 같은 구조물들은 여전히 내진설계가 적용되지 않고 있으며, 일부 기관에서만 설계자의 판단에 의해 비탈면 내진설계가 적용되고 있는 실정이다. 본 연구에서는 국내외 비탈면 내진설계에 대한 연구 결과를 소개하고 국내비탈면에 적용할 수 있는 내진설계 방안을 제시하였다. 비탈면 내진설계 적용범위는 경제성, 비탈면의 중요도 및 복구의 용이성 등을 고려하여 공학자가 내진설계 여부를 판단하도록 하는 것이 바람직하며, 우리나라 비탈면의 내진설계 적용 범위 및 관련 기준도 지진관련 자료를 축적하여 향후 단계적으로 정립하는 것이 바람직 할 것으로 판단된다.

Adaptive Finite Element Mesh Generation Schemes for Dynamic Structural Analyses

  • Yoon, Chong-Yul
    • 한국방재학회 논문집
    • /
    • 제10권1호
    • /
    • pp.23-28
    • /
    • 2010
  • 구조물의 방재를 위해서 구조물의 효율적인 유지관리는 필수적이며, 여기서 신뢰 있는 구조물의 동적해석은 중요한 역할을 한다. 유한요소법은 구조해석법으로 가장 많이 사용되는 방법으로 자리 잡고 있으며, 요소와 요소망이 제대로 선택되면 신뢰 있는 해석 결과를 출력한다. 시간 영역 동적해석에 유한요소법을 사용하려면 각 시간 단계에서 요소망을 재형성할 필요가 생길 수 있는데, 여기에 연산 시간 측면에서 효율적인 적응적 요소망 전략을 사용하면 편리하다. 본 연구는 시간영역 동적해석에서 전단계 해석 결과를 사용하여 계산된 대표 변형률 값을 오차 평가하는데 사용하고, 요소 세분화는 절점 이동인 r-법과 요소 분할인 h-법의 조합으로 효율적으로 계산하는 적응적 요소망 형성 전략을 제시한다. 적용한 캔틸레버보의 예제를 통하여 정확성과 연산 효율성을 검증하였고 나아가 방법의 간단함이 지진 하중, 풍하중 등에 의한 복잡한 구조 동적 해석에도 효율적으로 사용될 수 있는 것을 보여 준다.

해양준설토를 이용한 유동성 뒤채움재의 역학적 특성 (Mechanical Properties of Controlled Low Strength Materials with Marine Dredged Soil)

  • 김주득;이병식;이관호
    • 한국방재학회 논문집
    • /
    • 제7권2호통권25호
    • /
    • pp.35-44
    • /
    • 2007
  • 일반적으로 유동성 뒤채움재는 모래, 플라이애쉬, 물과 소량의 시멘트를 혼합하여 이용한다. 플라이애쉬는 재활용재료로서 최근에 재활용 활용도가 매우 높아, 이를 대체할 대체제로서 해양준설토를 이용하였다. 해양준설토를 이용한 유동성 뒤채움재의 특성을 비교하기 일반바다모래를 이용한 혼합물을 이용하였다. 해양준설토를 이용한 유동성 뒤채움재의 흐름특성, 경화특성 및 일축압축강도 특성을 평가하였다. 유동성 뒤채움재의 초기 공용성평가를 위해 최적의 배합비에서 3일 양생한 시료의 강도 특성을 이용하였다. 시간에 따른 유동성 뒤채움재의 점착력과 내부마찰각을 평가하였다. 또한 차량하중에 의한 침하량을 평가하기 위하여 크리프시험을 수행하였다. 이동용 FWD를 이용하여 혼합재료의 탄성계수를 역산하였다. 이러한 실험결과로부터 해양준설토를 이용한 유동성 뒤채움재의 공학적 특성은 도로하부 지하매설물용 뒤채움재로서 충분한 것으로 판단되었다.

Vector mechanics-based simulation of large deformation behavior in RC shear walls using planar four-node elements

  • Zhang, Hongmei;Shan, Yufei;Duan, Yuanfeng;Yun, Chung Bang;Liu, Song
    • Structural Engineering and Mechanics
    • /
    • 제74권1호
    • /
    • pp.1-18
    • /
    • 2020
  • For the large deformation of shear walls under vertical and horizontal loads, there are difficulties in obtaining accurate simulation results using the response analysis method, even with fine mesh elements. Furthermore, concrete material nonlinearity, stiffness degradation, concrete cracking and crushing, and steel bar damage may occur during the large deformation of reinforced concrete (RC) shear walls. Matrix operations that are involved in nonlinear analysis using the traditional finite-element method (FEM) may also result in flaws, and may thus lead to serious errors. To solve these problems, a planar four-node element was developed based on vector mechanics. Owing to particle-based formulation along the path element, the method does not require repeated constructions of a global stiffness matrix for the nonlinear behavior of the structure. The nonlinear concrete constitutive model and bilinear steel material model are integrated with the developed element, to ensure that large deformation and damage behavior can be addressed. For verification, simulation analyses were performed to obtain experimental results on an RC shear wall subjected to a monotonically increasing lateral load with a constant vertical load. To appropriately evaluate the parameters, investigations were conducted on the loading speed, meshing dimension, and the damping factor, because vector mechanics is based on the equation of motion. The static problem was then verified to obtain a stable solution by employing a balanced equation of motion. Using the parameters obtained, the simulated pushover response, including the bearing capacity, deformation ability, curvature development, and energy dissipation, were found to be in accordance with the experimental observation. This study demonstrated the potential of the developed planar element for simulating the entire process of large deformation and damage behavior in RC shear walls.

산지형 체험테마공원 조성을 위한 환경생태계획 및 훼손저감 기법 연구 (Ecological Planning and Mitigation of Deterioration Technique for Plan of Mountainous Experience Theme Park)

  • 이수동;강현경
    • 한국환경복원기술학회지
    • /
    • 제12권3호
    • /
    • pp.142-163
    • /
    • 2009
  • Taebaek city is located in the mountainous plateau area therefore the major industry was coal industry. According to dramatically declining of the major industry, Taebaek city is need to alternative industry which associated with considering the geographical characteristics of natural tourism resources for increasing the local economy. On the basis of these reasons, this study can be suggested ecological planning and mitigation of deterioration technique about the these study site. That is the reserved area for mountainous experience theme park. As the results of environmental ecology assessment are following as; The natural ecosystem areas, multi-layer structure forest such as forest of Pinus densiflora, forest of Quercus mongolica and deciduous forest have a high value of nature, diversity and potential. In addition, wild bird habitats were important area as a inhabitation, breeding, feeding and hiding. Therefore, on these areas should be preserved. Also, it needs to conserve on there such as more than three types of wild bird inhabitate areas, the fringe of high biological diversity, the wetland that have got good vegetation condition and the function of amphibia, reptiles crossing. In addition, inhabitation, the waterway of wetland form that have got wide waterside width needs to conserve. In conclusion, on the basis of analysis results such as conditions of plan, environment, ecological assessments, survey informations are able to suggest the connectivity of the axis of forest and management plan. Moreover, in the part of forest restoration plan, we suggest the plan of transplant for a compensation of damaged forest by land use.

수도권 국도교량 세굴위험도 평가 및 등급화 사례 연구 (A Case Study of Bridge Scour Vulnerability Evaluation and Prioritization for National Highway Bridges in the National Capital Region)

  • 박재현;김정훈;안성철;이주형;정문경;곽기석
    • 한국방재학회 논문집
    • /
    • 제8권2호
    • /
    • pp.7-21
    • /
    • 2008
  • 홍수 시 세굴로 인한 교량 기초의 파괴는 국내외적으로 교량 붕괴의 첫 번째 원인이다. 본 연구에서는 수도권 지역의 실제 국도교량에 대하여 세굴 위험도 평가 및 등급화를 수행하였다. 30개소 교량을 선정하여 지반 시추조사를 포함한 현장조사, 설계 홍수량에 대한 교량세굴 해석, 그에 따른 교량기초의 지지력 평가 및 위험도 분석을 하였고, 이를 바탕으로 교량세굴 위험도를 등급화 하였다. 위험도 평가 결과 직접확대기초 교량 26개소 중 9개소 교량이 장래 세굴 위험 가능성이 있는 것으로 나타났고, 나머지 17개소 교량은 안정한 수준으로 나타났다 말뚝기초 교량 4개소 중 3개소의 교량이 유의할 만한 수준으로 지지력이 감소하는 것으로 평가되었다.

마산만 국지해일 예경보 모의 시스템 구축 (A Warning and Forecasting System for Storm Surge in Masan Bay)

  • 한성대;이정렬
    • 한국방재학회 논문집
    • /
    • 제9권5호
    • /
    • pp.131-138
    • /
    • 2009
  • 본 연구에서는 태풍과 해일에 의한 범람 피해 영역을 예보하기 위한 동적경보시스템에 대해서 서술하였다. 이 시스템은 연안 지역에 내수범람과 같은 잠재적 위기가 예상되는 태풍 발생 시기에 해안공학적 지식이 부족한 공공 재난관리자들이 직접 신속하게 운용할 수 있도록 일반 PC에서 MATLAB의 GUI(Graphical User Interface)를 이용하여 개발되었다. 신속한 예보를 위한 바람장은 기상청 태풍 예보 자료를 이용하는 단순파라메터 태풍모델로 생성된다. 조위와 수심평균된 조류를 신속하고 정확하게 모의를 하기 위하여 경계 조건을 사전에 준비하였다. 또한 임의의 시점에서도 정확하고 빠르게 수행되도록 MATLAB 수치프로그램을 벡터화하였다. 예상 태풍경로와 관련 태풍 예보 자료를 마우스 등을 이용하여 윈도우 화면에 입력하고 실행하면 마우스로 선정된 특정범람 예상 지점에 대한 실시간 수위정보를 얻을 수 있다. 이 시스템은 지역 재난관리자들에게 가능한 위험 정보를 신속히 파악하고 체계적으로 운용될 수 있도록 개발되었다. 그러나 모델결과는 태풍의 경로에 민감하게 작용하고, 또 지역 재난관리자들이 정확한 정보를 생산하기 위하여 오랜 기간 숙련과 지역에 적합한 경험 계수의 결정 과정이 필요하다.

The Study for Hazardous Material Incidents in Korea

  • Kim, Geun-Young;Il, James E. Moore
    • 한국방재학회 논문집
    • /
    • 제9권1호
    • /
    • pp.91-97
    • /
    • 2009
  • 유해물질은 다양한 기체 액체 고체형태로 수송될 때 인간의 안전과 건강, 재산에 예측할 수 없는 위험을 야기시킬 수 있는 물질을 의미한다. 유해물질은 실수로 유출된다면 인명과 재산 그리고 환경측면에서 재난을 결과할 수 있다. 한국의 경제가 발전 할수록 유해물질의 사용은 증가한다. 그리고 유해물질 사고의 총 건수와 영향 역시 증가하게 되어 유해물질 사고의 위험도도 증가하고 있다. 다양한 유형의 유해물질이 공급지에서 수요지로 이동할 때 유해물질 사고의 유형과 특성이 어떠한가를 아는 것은 재난관리 측면에서 매우 중요한 사항이다. 본 연구의 목적은 한국에서 유해물질 사고를 발생시키는 유해물질의 유형과 특성을 조사하고, 시설과 교통측면에서 유해물질 사고의 시계열적 추세를 분석하는 것이다. 본 연구는 빈도분석, 교차분석과 같은 통계분석기법을 유해물질 사고의 통계적 유의성을 분석하기 위해 적용하였다.

Paleoseismological implications of liquefaction-induced structures caused by the 2017 Pohang Earthquake

  • Gihm, Yong Sik;Kim, Sung Won;Ko, Kyoungtae;Choi, Jin-Hyuck;Bae, Hankyung;Hong, Paul S.;Lee, Yuyoung;Lee, Hoil;Jin, Kwangmin;Choi, Sung-ja;Kim, Jin Cheul;Choi, Min Seok;Lee, Seung Ryeol
    • Geosciences Journal
    • /
    • 제22권6호
    • /
    • pp.871-880
    • /
    • 2018
  • During and shortly after the 2017 Pohang Earthquake ($M_w$ 5.4), sand blows were observed around the epicenter for the first time since the beginning of instrumental seismic recording in South Korea. We carried out field surveys plus satellite and drone imagery analyses, resulting in observation of approximately 600 sand blows on Quaternary sediment cover in this area. Most were observed within 3 km of the epicenter, with the farthest being 15 km away. In order to investigate the ground's susceptibility to liquefaction, we conducted a trench study of a 30 m-long sand blow in a rice field 1 km from the earthquake epicenter. The physical characteristics of the liquified sediments (grain size, impermeable barriers, saturation, and low overburden pressure) closely matched the optimum ground conditions for liquefaction. Additionally, we found a series of soft sediment deformation structures (SSDSs) within the trench walls, such as load structures and water-escaped structures. The latter were vertically connected to sand blows on the surface, reflecting seismogenic liquefaction involving subsurface deformation during sand blow formation. This genetic linkage suggests that SSDS research would be useful for identifying prehistoric damage-inducing earthquakes ($M_w$ > 5.0) in South Korea because SSDSs have a lower formation threshold and higher preservational potential than geomorphic markers formed by surface ruptures. Thus, future combined studies of Quaternary surface faults and SSDSs are required to provide reliable paleoseismological information in Korea.

Evaporative Stress Index (ESI)를 활용한 북한의 위성영상기반 농업가뭄 평가 (Satellite-based Evaporative Stress Index (ESI) as an Indicator of Agricultural Drought in North Korea)

  • 이희진;남원호;윤동현;홍은미;김대의
    • 한국농공학회논문집
    • /
    • 제61권3호
    • /
    • pp.1-14
    • /
    • 2019
  • North Korea has frequently suffered from extreme agricultural crop droughts, which have led to food shortages, according to the Food and Agriculture Organization (FAO). The increasing frequency of extreme droughts, due to global warming and climate change, has increased the importance of enhancing the national capacity for drought management. Historically, a meteorological drought index based on data collected from weather stations has been widely used. But it has limitations in terms of the distribution of weather stations and the spatial pattern of drought impacts. Satellite-based data can be obtained with the same accuracy and at regular intervals, and is useful for long-term change analysis and environmental monitoring and wide area access in time and space. The Evaporative Stress Index (ESI), a satellite-based drought index using the ratio of potential and actual evaporation, is being used to detect drought response as a index of the droughts occurring rapidly over short periods of time. It is more accurate and provides faster analysis of drought conditions compared to the Standardized Precipitation Index (SPI), and the Palmer Drought Severity Index (PDSI). In this study, we analyze drought events during 2015-2017 in North Korea using the ESI satellite-based drought index to determine drought response by comparing with it with the SPI and SPEI drought indices.