• Journal of Convergence Society for SMB
• /
• v.4 no.4
• /
• pp.13-18
• /
• 2014

The usage rate of user due to advances in smartphone development is higher than the usage rate to use a PC. However, smartphone usage popularized research to protect sensitive information, such as smart phone users personal information, financial information is a small state. In this paper, we analyzed the various vulnerabilities in smartphone studies to date have been looking into the corresponding port smart consumer dispute resolution methods and criteria for smartphone security attack methods and analysis. In particular, the threat of such a network, malware, Peep attack of the security threats arising from the smartphone they can avoid or mitigate threats to minimize the smartphone security damage is done to the disclosure of personal information, such as direct damage or financial loss the analysis of that method.

• Journal of the Korea Safety Management & Science
• /
• v.20 no.1
• /
• pp.1-9
• /
• 2018

As the chemical industry becomes more advanced, the awareness of chemical accidents is rising, and legal systems for chemical safety management are strengthened. In this study, quantitative risk assessment of liquid chlorine leak was conducted. Risk assessment was performed in the order of frequency analysis, consequence analysis, and risk calculation. The individual risk was presented in the form of contour lines. The social risk was expressed by the FN curve. The risk of day and night was in an unacceptable area, so it was required to mitigate risk. Therefore in-building, which could trap the pool, was selected as a risk mitigation measure. As a result of the cost benefit analysis, it was concluded that this measure should be reasonably implemented.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.659-663
• /
• 2010

In recent, flood inundation damages by hydraulic structure failures have increased drastically and thus a variety of countermeasures were needed to minimize such damages. A real-time flood inundation prediction technique is essential to protect and mitigate flood inundation damages. In the context of real time flood inundation modeling, this study aims to develop a grid based two-dimensional numerical method for flood inundation modeling using globally-available DEM data: SRTM with $90m{\times}90m$ spatial resolution. The newly-developed model guarantees computational efficiency in terms of geometric data processing by direct application of DEM for flood inundation modeling and also have good compatibility with various types of raster data when compared to a commercial model such as FLUMEN. The model, which employed the leap-frog algorithm to solve shallow water and continuity equations, can simulate inundating flow from channel to lowland and also returning flow from lowland to channel by comparing water levels between channel and lowland in real time. We applied the model to simulate the BaekSan levee break in the Nam river during a flood period from August 10 to 13, 2002. The simulation results had good agreements with the field-surveyed data in terms of inundated area and also showed physically-acceptable velocity vector maps with respect to inundating and returning flows.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.251-261
• /
• 2006

FMEA(Failure Mode and Effects) is a procedure for the analysis of a system to identify the potential failure modes, and their effects and causes to reduce or mitigate the critical effects of the system. Recently, FMEA is used in various industries and it is specialized in each industry. For instance, MIL-1629a in Military industry, SAE-J1739 in Automotive industry and other industry are using specialized FMEA method. Though Railroad industry requires the high reliability system, it does not have the FMEA method which is specialized to them. So in this paper, we examined the MIL-1629a, SAE-J1739, IEC-60812 and compared those standards. Furthermore, we propose the FMEA method that is specialized to the railroad system.

• Korean Journal of Health Education and Promotion
• /
• v.27 no.2
• /
• pp.109-119
• /
• 2010

Objectives: The aim of this paper is to analyze the heath factors for longevity index of survival rate in Korean centenarians, which contribute to longevity. Methods: The subjects of this paper included 996 centenarians in 276 regions of Korea that the data in this study was collected from the National Statistical Office, Republic of Korea in 2005. This paper that proposes indicators as follow: The ratio between the longevity index above 100 years old (100LI) and the survival rate above 65 years old (65SR): 100LISR. The study that examined the longevity factors that between 100LISR and health factors. Results: The results of this study showed that Gyeryong City (23 per 10,000 above 65 years old) included the most of 100LISR in Korea, followed by Cheju Island. The regression showed that significant predictors for longevity (100LISR) were non-drinking, non-smoking, garlic and root vegetable and elderly people are suffering serious health problems, they need caregivers for elderly care (R-Sq(%)=83.9, P=0.001). The correlation showed that significant factors as longevity were Sulfur dioxide (r=-0.677, p=0.004). Conclusion: The implications of this study are that longevity is to be fostered by promoting healthy behaviors of elderly and by inventing various policies to mitigate the environmental pollution.

• Korean Journal of Health Education and Promotion
• /
• v.27 no.2
• /
• pp.79-93
• /
• 2010

Objectives: This study aims to identify the factors associated with the stages of change in colorectal cancer screening, and develop a model explaining these stages of change by using structural equation modeling analysis. Methods: On the basis of literature review and expert advice, we constructed our hypothetical model that consisted of five theoretical constructs(process of change, pros, cons, self-efficacy, stage of change). In 2009, data was collected from 486 participants aged between 50 and 69. The data were analyzed by SPSS 15.0 and AMOS 6.0. Results: In the case of stage of adoption, the contemplation stage was the most common (37.4%), followed by the action stage (26.5%). In the final model of the stage of change for colorectal cancer screening, there was a direct influence of the process of change ($\gamma$=.562, p<.001), and cons ($\gamma$=.132, p<.01) on the stage of change with the terms of GFI .931, AGFI .904, RMR .038, NFI .930, and NNFI .936. Conclusion: It is necessary to produce and disseminate evidence-based cancer screening information, which can mitigate the negative attitude among the public toward cancer screening. Also, it is essential to provide a safer and more comfortable environment at cancer screening center.

• Journal of Hydrogen and New Energy
• /
• v.21 no.2
• /
• pp.129-135
• /
• 2010

Homogeneous charge compression ignition (HCCI) engines have the potential to provide both diesel-like efficiency and very low emissions of nitrogen oxide (NOx) and particulate matter(PM). However, several technical issues still must be resolved before HCCI can see application. Among these, steep pressure-rise rate which leads to narrow operating range of HCCI engine continues to be a major issue. This work investigates the combination of two methods to mitigate the excessive pressure-rise rates at high power output, namely fuel stratification and Cooled exhaust-gas recirculation (Cooled EGR), after identifying the each effects to pressure-rise rate. When applying the fuel stratification to simulation, total fuelling width of 0.15 at BDC is set as a equivalent ratio difference based on the previous research. In order to simulate the effects of cooled EGR, $CO_2$ mole fraction in pre-mixture is changed ranging from 0 to 30%. DME which has a characteristic of two-stage ignition is used as a fuel.

• Progress in Superconductivity and Cryogenics
• /
• v.16 no.2
• /
• pp.59-63
• /
• 2014

HTS power cable bypass the fault current through the former to protect superconducting tapes. On the other hand, the fault current limiting (FCL) power cable can be considered to mitigate the fault current using its increased inductance and resistance. Using the increased resistance of the cable is similar to the conventional resistive fault current limiter. In case of HTS power cable, the magnetic field of HTS power cable is mostly shielded by the induced current on the shield layer during normal operation. However, quench occurs at the shield layer and its current is kept below its critical current at the fault condition. Consequently, the magnetic field starts to spread out and it generates additional inductive impedance of the cable. The inductive impedance can be enhanced more by installing materials of high magnetic susceptibility around the HTS power cable. It is a concept of SFCL power cable. In this paper, a sample SFCL power cable is suggested and experimental results are presented to investigate the effect of iron cover on the impedance generation. The tests results are analyzed to verify the generation of the inductive and resistive impedance. The analysis results suggest the possible applications of the SFCL power cable to reduce the fault current in a real grid.

• International Journal of Fluid Machinery and Systems
• /
• v.7 no.2
• /
• pp.54-59
• /
• 2014

Particle Image Velocimetry combined with developed image processing method is adopted to study the liquid-solid two phase flow in the centrifugal pump impeller with crystallization phenomenon. The tracer particle is used to follow the liquid phase, which has the diameter between 8 to $12{\mu}m$. The crystal particle precipitates from the sodium sulfate solution does change the wavelength of the laser, and which has great laser scattering characteristics. The diameter of the crystal particle is larger than $20{\mu}m$. Through calculating the diameter of the particles in the image, the tracer particle and the crystal particle can be distinguished. By analyzing the experimental result, the following conclusion has been obtained. During the delay period, there is not any crystal particle and the pump performance has not been changed. As the crystallization process begins, the crystal nuclei appears from the supersaturation solution and grows larger with temperature decreasing, which has the tendency of moving towards the pressure side. The characteristics of liquid-solid two phase flow with crystallization phenomenon in the pump are obtained according to analysis of experimental results, and some guiding advices are presented to mitigate the crystallization phenomenon in pump impeller.

• KIEAE Journal
• /
• v.13 no.3
• /
• pp.21-26
• /
• 2013

Recently, as the concern over environmental problem has been serious all over the world, carbon has become a key issue to mitigate the problem. In the field of Architecture, various sustainable assessment systems and LCCO2 assessment strategies have been developed, guiding low carbon building while planning. However, assessment system for low carbon neighborhood, which can be more efficient strategy, is still in the stage of research. In this paper, as a research for low carbon assessment system and planning guideline for neighborhood, scope meeting domestic condition has been set and sustainable assessment system for neighborhood, which is similar to low carbon concept, have been compared. LEED-Neighborhood Development, BREEAM-Communities, CASBEE-Urban Development, and GBCC-Apartment Houses were used for comparison. As a result, it is found that those systems has many differences in judging system, aggregating method, scope of evaluation, and relations with a building assessment system. The concern about carbon is not insufficient yet. Finally, assessment system for low carbon neighborhood, which is not only for establishing the plan, but also for giving guideline at the very first state of the plan, should be developed as fast as passible. With the result of this paper, establishment of assessment criteria and the way to measure quantitative $CO_2$ should be studied forward.