• Title/Summary/Keyword: mitigate

Search Result 2,580, Processing Time 0.028 seconds

Effectiveness of strake installation for traffic signal structure fatigue mitigation

  • Wieghaus, Kyle T.;Hurlebaus, Stefan;Mander, John B.
    • Structural Monitoring and Maintenance
    • /
    • v.1 no.4
    • /
    • pp.393-409
    • /
    • 2014
  • Across-wind response is often the cause of significant structural vibrations that in turn cause fatigue damage to welded and other connections. The efficacy of low-cost helical strakes to mitigate such adverse response is presented for a traffic signal structure. Field observations are made on a prototype structure in a natural wind environment without and with helical strakes installed on the cantilevered arm. Through continuous monitoring, the strakes were found to be effective in reducing across-wind response at wind speeds less than 10 m/s. Estimates of fatigue life are made for four different geographical locations and wind environments. Results for the class of traffic signal structure show that helical arm strakes are most effective in locations with benign wind environments where the average annual wind speed is not more than the vortex shedding wind speed, which for this investigation is 5 m/s. It is concluded that while strakes may be effective, it is not the panacea to mitigating connection fatigue at all locations.

Design of aerodynamic stabilizing cables for a cable-stayed bridge during construction

  • Choi, Sung-Won;Kim, Ho-Kyung
    • Wind and Structures
    • /
    • v.11 no.5
    • /
    • pp.391-411
    • /
    • 2008
  • A design procedure of stabilizing cable is proposed using buffeting analysis to stabilize the seesaw-like motion of the free cantilevered structure of a cable-stayed bridge during its construction. The bridge examined is a composite cable-stayed bridge having a main span length of 500 m. Based on the buffeting analysis, the stress in bare structure exceeded the allowable limit and a set of stabilizing cable was planned to mitigate the responses. The most efficient positions of the hold-down stabilizing cables were numerically investigated by means of an FE-based buffeting analysis and the required dimensions and pretension of the stabilizing cables were also calculated. The proposed stabilizing measure would be expected to secure the aerodynamic safety of a cantilevered structure under construction with considerable mitigation of buffeting responses.

Resource Allocation in OFDMA System with User Cooperation (협동 전송 방식을 이용한 OFDMA 시스템에서의 자원 관리에 관한 연구)

  • Han, Young-Goo;Kim, Se-Hun
    • Proceedings of the Korean Operations and Management Science Society Conference
    • /
    • 2006.11a
    • /
    • pp.674-677
    • /
    • 2006
  • Orthogonal frequency division multiple access (OFDMA) has emerged as one of the core multiple access schemes in 4G to mitigate the problems of frequency selectivity and inter-symbol interferences. In OFDMA, cooperative transmission can be adopted in transmission between each user and base station. Cooperative transmission can provide better channel environments and additional transmitter diversity. In this paper, we formulate a user and subcarrier assignment problem in OFDMA system with user cooperation and propose an efficient scheme to solve it.

  • PDF

Joint Optimization of the Number of Suppliers and the Order Quantities Considering Compensation Orders under Supply Chain Disruptions (공급사슬 중단에 대비한 공급업체의 수와 주문량 및 보완주문 최적화 방안에 관한 연구)

  • Jin, Zhen-yan;Seo, Yong Won
    • Journal of the Korean Operations Research and Management Science Society
    • /
    • v.42 no.2
    • /
    • pp.19-34
    • /
    • 2017
  • In this study, we develop an optimal sourcing strategy considering compensation orders to mitigate the supply chain disruption risks. We considered two-echelon supply chain consisting of a single buyer and multiple suppliers who have fixed transaction cost and probabilistic disruption risks. Under this setting, we provide the joint optimization method to determine the number of suppliers and the order quantities. Through numerical examples, we provide managerial implications on the sourcing strategy by investigating changes in the order quantities and the number of suppliers due to the degree of supply chain disruption risks.

Power Allocation and Capacity Analysis of Secondary User in Heterogeneous Spectrum Sharing Systems

  • Lim, Sungmook;Ko, Kyunbyoung
    • International Journal of Contents
    • /
    • v.12 no.1
    • /
    • pp.70-75
    • /
    • 2016
  • In this paper, we considered heterogeneous spectrum sharing system where the number of subcarriers of the primary user (PU) was twice as much as that of the secondary user (SU). In this case, due to non-orthogonality and inter-carrier interference (ICI) from SU to PU, it is difficult to satisfy the interference constraint of PU. In order to mitigate ICI and satisfy the interference constraint, we proposed a new transmission scheme of the SU with power allocation scheme. The proposed scheme will only generate subcarrier-by-subcarrier interference. Therefore, it can easily satisfy the interference constraint of the PR and enhance the capacity of the SU. In addition, we derived the ergodic capacity of the SU. Based on numerical results, we confirmed that the proposed schemes could guarantee SU with a reliable capacity while satisfying the interference constraint of the PU. In addition, the derived capacity well matched the numerical results.

A New PWM Method for Conducted EMI Reduction in Inverter fed Motor Drive System (인버터 구동 시스템에서의 EMI 저감을 위한 새로운 PWM 구현)

  • Kun Hahm Nyon;Kim Lee-Hun;Jun Ki-Young;Chun Kwang-Su;Won Chung-Yuen;Han Kyung-Hee
    • Proceedings of the KIPE Conference
    • /
    • 2004.07a
    • /
    • pp.384-388
    • /
    • 2004
  • High frequency common mode voltage produced by power inverters are a major cause of conducted EMI, creating motor ground currents, bearing currents and other harmful by products. This paper focuses on a new SVPWM method with random PWM injection to reduce conducted EMI noise. A New PWM technique associated with the common mode voltage can be significantly reducing and contributes to mitigate. The common mode voltage to $50\%$ in comparison with that for conventional SVPWM technique. Validation of the theory and reduction methods are then performed experiment ally based on an induction motor drive.

  • PDF

Single-Phase Impedance-Source Dynamic Voltage Restorer (단상 임피던스-소스 동적 전압 보상기)

  • Park, H.J.;Jung, Y.G.;Lim, Y.C.
    • Proceedings of the KIPE Conference
    • /
    • 2008.06a
    • /
    • pp.458-461
    • /
    • 2008
  • This paper deals with a single-phase impedance-source dynamic voltage restorer (Impedance-DVR) to mitigate voltage sag/swell for the critical loads. The proposed system is composed of passive filter and impedance-source topology inverter. As an ESS(Energy Storage System) of the proposed system is employed the Proton Exchange Membrane Fuel Cells (PEMFC). To calculate and control the compensation voltage, single-phase $^id-^iq$ theory in dq rotating reference frame and PI controller are used. Simulation results under voltage sag and swell are presented to show the performance.

  • PDF

Mitigation of Voltage Sag and Swell Using Direct Converters with Minimum Switch Count

  • Abuthahir, Abdul Rahman Syed;Periasamy, Somasundaram;Arumugam, Janakiraman Panapakkam
    • Journal of Power Electronics
    • /
    • v.14 no.6
    • /
    • pp.1314-1321
    • /
    • 2014
  • A new simplified topology for a dynamic voltage restorer (DVR) based on direct converter with a reduced number of switches is presented. The direct converter is fabricated using only three bi-directional controlled switches. The direct converter is connected between the grid and center-tapped series transformer. The center-tapped series transformer is used to inject the compensating voltage synthesized by the direct converter. The DVR can properly compensate for long-duration, balanced, and unbalanced voltage sag and swell by taking power from the grid. The switches are driven by ordinary pulse width modulation signals. Simulation and hardware results validate the idea that the proposed topology can mitigate sag of 50% and swell of unlimited quantity.

Design of an LCL Filter employing a Symmetric Geometry and its Control in Grid-connected Inverter Applications (계통연계형 인버터에서 대칭 구조를 갖는 LCL 필터 설계 및 제어)

  • Lee, Kui-Jun;Park, Nam-Ju;Hyun, Dong-Seok
    • Proceedings of the KIPE Conference
    • /
    • 2008.06a
    • /
    • pp.250-252
    • /
    • 2008
  • An inductor-capacitor-inductor (LCL) filter are widely adapted in grid-connected inverter applications. In this paper, the harmonic attenuations of the LCL filter are quantitatively analyzed, and then the design optimization of two inductance values, which are related on a cost and a size, is illustrated. Based on the design optimization, the LCL filter employing a Symmetric Geometry is proposed. Through the equivalent circuit analysis of the proposed LCL filter, the operating characteristics and validity are presented in detail. In addition, simple proportional-integral (PI) current controller suitable for the LCL Filter is designed to mitigate the resonance problem. From simulation results, it is seen that the proposed LCL filter and control method have a sufficient attenuation and stability for the high frequency distortions and load variations.

  • PDF

Mitigation Techniques of Channel Collisions in the TTFR-Based Asynchronous Spectral Phase-Encoded Optical CDMA System

  • Miyazawa, Takaya;Sasase, Iwao
    • Journal of Communications and Networks
    • /
    • v.11 no.1
    • /
    • pp.1-10
    • /
    • 2009
  • In this paper, we propose a chip-level detection and a spectral-slice scheme for the tunable-transmitter/fixed-receiver (TTFR)-based asynchronous spectral phase-encoded optical codedivision multiple-access (CDMA) system combined with timeencoding. The chip-level detection can enhance the tolerance of multiple access interference (MAI) because the channel collision does not occur as long as there is at least one weighted position without MAI. Moreover, the spectral-slice scheme can reduce the interference probability because the MAI with the different frequency has no adverse effects on the channel collision rate. As a result, these techniques mitigate channel collisions. We analyze the channel collision rate theoretically, and show that the proposed system can achieve a lower channel collision rate in comparison to both conventional systems with and without the time-encoding method.