• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.6
• /
• pp.505-513
• /
• 2021

We propose an autonomous mission management software design and verification technique for unmanned aerial vehicles to autonomously mitigate dynamic situation changes occurred in the inside and outside of an aircraft in compliance with the mitigation priority order. The proposed autonomous mission management software is designed in a modular architecture that consists of concurrently executing multiple threads. To verify it, we suggest three verification steps: 1) software integration by checking the expected request/response messages between the threads for all possible dynamic situation changes; 2) integration test to verify the software functionality; 3) performance test to verify the quantitative software performance. Especially, the software integration test environment is built and utilized to carry out the integration and performance tests.

• Safety and Health at Work
• /
• v.12 no.1
• /
• pp.57-65
• /
• 2021

Background: The objective of this study was to elucidate the relationships musculoskeletal pains with combined vulnerability in terms of age, gender, and employment status Methods: The fifth European Working Conditions Survey (EWCS) in 2010 (43,816 participants aged 15 years and over) analyzed for European employees and the third Korean Working Conditions Survey (KWCS) in 2011 (50,032 participants aged 15 years and older) analyzed for Korean employees. In this study, three well known vulnerable factors to musculoskeletal pains (older age, female gender, and precarious employment status) were combined and defined as combined vulnerability. Associations of musculoskeletal pains with combined vulnerability were assessed with prevalence ratios (PRs) and 95% confidence intervals (CIs) estimated by Poisson regression models with robust estimates of variance. Results: The prevalences of musculoskeletal pains were lower but the absolute and relative differences between combined vulnerabilities were higher among Korean employees compared with the European employees. Furthermore, the increased risk of having musculoskeletal pains according to combined vulnerability was modestly explained by socioeconomic factors and exposure to ergonomic risk factors, especially in Republic of Korea. Conclusions: The results of this study showed that the labor market may be more unfavorable for female and elderly workers in Republic of Korea. Any prevention strategies to ward off musculoskeletal pains, therefore, should be found and implemented to mitigate or buffer against the most vulnerable work population, older, female, and precarious employment status, in Republic of Korea.

• Journal of the Korea Convergence Society
• /
• v.11 no.12
• /
• pp.233-242
• /
• 2020

We posit that employee ownership through defined contribution (DC) plans results in managerial entrenchment, and then examine the effect of the enactment of the Pension Protection Act of 2006 on the relation between the employee ownership and firm performance. By conducting Ordinary Least Square regression with the data from Form 5500 over the period of 1999-2014, we find that firms with large employee ownership increase their firm value measured by Tobin's Q after the adoption of the Act. These findings suggest that the adoption of the Act has been effective to mitigate the negative effect of managerial entrenchment by decreasing the employee ownership and reinforcing the fiduciary duty of plan trustees. Given the fact that we test the effects of the diversification rule on employee ownership using firm performance, further research could aim to examine the effects of the rule on employee ownership using stock return or market reaction.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.3
• /
• pp.69-75
• /
• 2021

Limitation of the TCP/IP network technology included in the vehicle communication is due to the frequent mobility of the vehicle, the increase in intermittent connection requirements, and the constant presence of the possibility of vehicle hacking. VNDN technology enables the transfer of the name you are looking for using textual information without the need for vehicle identifiers like IP/ID. In addition, intermittent connectivity communication is possible rather than end-to-end connection communication. The data itself is the subject of communication based on name-based forwarding using two types of packets: Interest packet and Data packet. One of the issues to be solved for the realization of infotainment services under the VNDN environment is the traffic explosion caused by data broadcasting. In this paper, we analyze and compare the existing technologies to reduce the data broadcast storm. Through this, we derive and analyze the requirements for presenting the best data mitigation technique for solving the data explosion phenomenon in the VNDN environment. We expect this paper can be utilized as prior knowledge in researching improved forwarding techniques to resolve the data broadcast explosion in connected vehicles over NDN.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.10
• /
• pp.83-94
• /
• 2018

In many theoretical and empirical studies on the design issues of therapeutic healthcare facilities, spatial configuration that promotes users' wayfinding behavior, has been emphasized as a significant factor to mitigate stressful experiences and to enhance restorative quality in the healthcare environment. This is also applicable to the healthcare setting for children. However, not much evidence has been reported with regard to the relationship between spatial configuration and wayfinding behaviors in this specific setting. Moreover, healthcare facilities for children with physical disabilities need more attention to provide easy wayfinding due to various physical restrictions. The aim of this study is therefore, to unfold the relationship between spatial configuration and visual cognitive qualities of outpatient spaces in the selected children's rehabilitation hospitals in Seoul, by examining visual cognitive attributes such as visibility, accessibility, and intelligibility. In the first phase, the spatial layout of the hospitals was analyzed, with an emphasis on the major outpatient areas such as the entrance lobby, doctors' examination, and physical therapy zones. In the second phase, a space syntax tool was implemented to examine visual cognitive characteristics of the spatial configuration. The spatial configuration parameters measured were integration, integration core, visual isovist field continuity, correlation between integration and step depth, and the correlation between integration n and integration 3. As a result, the integration was higher in the hall type configuration. Circulation intersections acted mostly as integration cores for better visibility. Some areas showed the lack of continuity in the visual isovist fields overlap and irregular correlation between integration and step depth. The intelligibility was higher in the circulation area and social interaction spaces such as a cafe, reception waiting, and therapy waiting areas. Based on the analysis, design implication and possible future improvement were discussed to enhance wayfinding experiences in the hospitals for children with physical disabilities.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.33 no.12
• /
• pp.53-63
• /
• 2017

The purpose of this study is to present an integrated analysis for energy use and its patterns as vertical locations of the dwelling units in apartment buildings which are located in an urban area and constructed by a renowned contractor. In order to enhance the effectiveness of the method, the original data of electricity, water, and gas bills which directly reflect the energy use are sorted and analyzed into several groups as vertical locations in each building. And also, by use of comparing and contrasting the data on a monthly and yearly basis, the accuracy of analyses for seasonal energy use and its patterns is strengthened. Comparative analyses used in this study describe the results that vertical locations of dwelling units do not have much influence on electricity and water usage, but are closely related with gas usage for a heating season. According to the analysis of gas usage, the units on the ground and right above pilotis need enhancement in the insulations for heating to mitigate energy loss. Also, the analysis for the middle floor units in each group describe the fact that the gas usage of the units on the ground is consumes 1.5 times greater than that of the typical floors. Therefore, enhanced insulation strategies need to be considered against the adverse condition that the heat loss increases as the wall facing the outside air increases or as the wind velocity increases through the pilotis.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.12
• /
• pp.3-12
• /
• 2018

The purpose of this study is to draw implications for revitalizing public-private partnership system that can reduce the financial burden of the government and utilize the creative know-how of the private sector by analyzing the cases of public building construction projects by public-private partnership method in Japan. In this study, first of all, I looked at the current state of public-private partnership policy in Japan and then selected 8 representative projects as an analysis target. Next, in order to grasp the specific situation that is aimed at securing publicity and revitalizing private participation, I analyzed the role sharing between public and private sectors in the maintenance and management of public buildings, and examined the conditions for private revenue facilities. As a result of the analysis, the following implications were drawn. First, the methods of public building construction by public-private partnership in Japan are largely divided into BTO method based on the PFI method, and the method of installing public facilities and private revenue facilities based on the term leasehold rights system. Second, measures were taken to mitigate the burden of the state and local governments in establishing public facilities. Third, the public has delegated to the private sector actively about the role that the private sector can play, expanding the role of private sector widely from design to operation in the public building construction projects. Fourth, in order to actively participate in private sectors and promote regional revitalization, private profit-making projects are widely accepted, but consideration has been given to guarantee a certain level of publicity.

• Current Optics and Photonics
• /
• v.6 no.6
• /
• pp.521-549
• /
• 2022

Fiber lasers have made remarkable progress over the past three decades, and they now serve far-reaching applications and have even become indispensable in many technology sectors. As there is an insatiable appetite for improved performance, whether relating to enhanced spatio-temporal stability, spectral and noise characteristics, or ever-higher power and brightness, thermal management in these systems becomes increasingly critical. Active convective cooling, such as through flowing water, while highly effective, has its own set of drawbacks and limitations. To overcome them, other synergistic approaches are being adopted that mitigate the sources of heating at their roots, including the quantum defect, concentration quenching, and impurity absorption. Here, these optical methods for thermal management are briefly reviewed and discussed. Their main philosophy is to carefully select both the lasing and pumping wavelengths to moderate, and sometimes reverse, the amount of heat that is generated inside the laser gain medium. First, the sources of heating in fiber lasers are discussed and placed in the context of modern fiber fabrication methods. Next, common methods to measure the temperature of active fibers during laser operation are outlined. Approaches to reduce the quantum defect, including tandem-pumped and short-wavelength lasers, are then reviewed. Finally, newer approaches that annihilate phonons and actually cool the fiber laser below ambient, including radiation-balanced and excitation-balanced fiber lasers, are examined. These solutions, and others yet undetermined, especially the latter, may prove to be a driving force behind a next generation of ultra-high-power and/or ultra-stable laser systems.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.213-225
• /
• 2020

Floating Offshore Wind Turbines (FOWT) installed in the deep sea regions where stable and strong wind flows are abundant would have significantly improved energy production capacity. When designing FOWT, it is essential to understand the stability and motion performance of the floater. Water tank model tests are required to evaluate these aspects of performance. This paper describes a model test and numerical simulation for a 750-kW semi-submersible platform wind turbine model-II. In the previous model test, the 750-kW FOWT model-I suffered slamming phenomena from extreme wave conditions. Because of that, the platform freeboard of model-II was increased to mitigate the slamming load on the platform deck structure in extreme conditions. Also, the model-I pitch Response Amplitude Operators (RAO) of simulation had strong responses to the natural frequency region. Thus, the hub height of model-II was decreased to reduce the pitch resonance responses from the low-frequency response of the system. Like the model-I, 750-kW FOWT model-II was built with a 1/40 scale ratio. Furthermore, the experiments to evaluate the performance characteristics of the model-II wind turbine were executed at the same location and in the same environment conditions as were those of model-I. These tests included a free decay test, and tests of regular and irregular wave conditions. Both the experimental and simulation conditions considered the blade rotating effect due to the wind. The results of the model tests were compared with the numerical simulations of the FOWT using FAST (Fatigue, Aerodynamics, Structures, and Turbulence) code from the National Renewable Energy Laboratory (NREL).

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.10
• /
• pp.51-56
• /
• 2011

This study was conducted to investigate the applicability of pulsed electric field (PEF) treatment for the prevention of scaling formation and membrane fouling reduction. To validate the effect of PEF and to identify the mechanism, some experiments with and without PEF treatment were carried out. PEF treatment affected the precipitation of $CaCO_3$ by which $CaCO_3$ particles were actively grown and sedimented. It was confirmed that the calcium ions were decreased as 78% and particle size was grown by PEF treatment. It was also verified that the crystalline structure of $CaCO_3$ was transformed by PEF treatment from Aragonite, which is formed at a high temperature and hard to be removed, to Calcite being stable at room temperature. In PEF treatment, permeate volume and permeation flux were greater than that of without PEF, case while Langelier Index(LI) decreased. From the experiment results, PEF treatment is believed to be an effective method to prevent scaling formation and to mitigate $CaCO_3$ fouling as the pretreatment of membrane filtration.