• Journal of Ocean Engineering and Technology
• /
• 제30권4호
• /
• pp.303-309
• /
• 2016

As commercialization of the Arctic sea route and resource developments are regularized, demands for ice-breaking tankers, LNG carriers, and offshore plants are expected to increase. In addition, the existing ice-breaking cargo ships navigating in the ice-covered waters are worn out. Hence, the construction of new ships is likely to be undertaken for both current and long-term applications. The design of ships navigating in ice-covered waters demands conservative methods and strict development standards owing to the extreme cold and collision tendencies with ice floes and/or icebergs. ISO 19906 recently stated that a fatigue limit should be defined when designing Arctic offshore structures such that the ice-induced fatigue becomes one of the important design drivers. Thus, establishing systematic measures to mitigate ice-induced fatigue problems in ice-breaking ships are important from the viewpoint of having a competitive advantage. In this paper, the issues relating to ice-induced fatigue problems, based on data and published literature, are examined to describe the criticality of ice-induced fatigue. Potential fatigue damage possibilities are investigated using data measured in the Arctic Ocean (2013) and using the Korean icebreaker, ARAON.

• Aerospace Engineering and Technology
• /
• 제7권1호
• /
• pp.24-29
• /
• 2008

Aircraft fuel efficiency is one of main concerns to aircraft manufacturers and to aviation companies because jet fuel price has tripled in last ten years. One of simple and effective methods to increase fuel efficiency is to reduce aircraft induced drag by using of wingtip devices. Induced drag is closely related to the circulation distribution, which produces strong wingtip vortex behind the tip of a finite wing. Wingtip devices including winglets can be successfully applied to reduce induced drag by wingtip vortex mitigation. Winglet design, however, is very complicated process and has to consider many parameters including installation position, height, taper ratio, sweepback, airfoil, toe-out angle and cant angle of winglets. In current research, different shapes of winglets are compared in the view of vortex mitigation. Appropriately designed winglets are proved to mitigate wingtip vortex and to increase lift to drag ratio. Also, the results show that winglets are more efficient than wingtip extension. That is the reason B-747-400 and B-737-800 chose winglets instead of a span increase to increase payload and range. Drag polar comparison chart is presented to show that minimum drag is increased by viscous drag of winglet, but at high lift, total drag is reduced by induced drag decrease. So, winglets are more efficient for aircraft that cruises at a high lift condition, which generates very strong wingtip vortex.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제11권6호
• /
• pp.1141-1149
• /
• 2007

This paper describes two major techniques; image processing and gas vent insert and rejection control, for efficient gas vent exchange and holes detecting on the shoes mold. The key idea is to detect holes on the mold to select which holes to insert and to reject automatically guide center of hole's position. This allows us to save labor time while minimizing defective rate of PU shoes mold forming and production costs for gas vent exchange such as insertion and rejection.. Our experimental results have demonstrated that the hole's detection and gasvent exchange mechanism are more efficient and provide accurate mechanism to mitigate risks of vent injection/rejection failures.

• Journal of Korean Medical Science
• /
• 제33권45호
• /
• pp.284.1-284.12
• /
• 2018

Background: Posttraumatic stress symptoms (PTSS) in patients with psychological trauma lead to poor health-related quality of life. Understanding of the relationships among PTSS, anxiety, depression, and illness intrusiveness will guide the development of efficient approaches to enhance subjective well-being in patients with psychological trauma. This study investigated whether anxiety and depression mediate the relationship between PTSS and illness intrusiveness in the hope of providing more comprehensive and effective trauma treatment. Methods: Psychiatric outpatients who visited the trauma clinic of a university hospital (n = 260) participated in this study. Assessments were conducted for PTSS, anxiety, depression, and illness intrusiveness. Structural equation modeling and path analysis were performed to analyze the mediating effects of anxiety and depression on the relationship between PTSS and illness intrusiveness. Results: PTSS had both direct and indirect exacerbating effects on illness intrusiveness. Anxiety exhibited the largest direct exacerbating effect on illness intrusiveness. The indirect effects of PTSS on illness intrusiveness through anxiety alone and through a depression-to-anxiety pathway were significant, but the indirect effect through depression alone was not. Conclusion: The findings demonstrate that anxiety, both independently and as part of an interrelated pathway with depression, partially mediates the relationship between PTSS and illness intrusiveness. Appropriate interventions and a comprehensive approach to alleviate anxiety and depression could mitigate the negative effects of PTSS on illness intrusiveness in patients with psychological trauma.

• Journal of Climate Change Research
• /
• 제7권4호
• /
• pp.373-381
• /
• 2016

Before the Conference of Parties (COP) 21 of the United Nations Framework Convention on Climate Change (UNFCCC) in 2015, most parties of UNFCCC had submitted their intended nationally determined contributions (INDCs) and to achieve their voluntary targets, some parties consider using international market mechanisms. As one of such mechanisms, Japan promoted its own bilateral mechanism called Joint Crediting Mechanism (JCM). In this study, feasibility studies and projects under JCM have been analyzed by project type, sector, country and region, which could provide some implications in designing Korea's future climate policy to achieve Korea's targets of 11.7% using international market mechanism in INDC. Since 2010, JCM has promoted 542 projects and feasibility studies in 44 countries according to the Institute for Global Environmental Strategies (IGES) database. Among 542 projects, about 80% were feasibility studies implying that JCM was more focused on project identification. However, current trends of JCM show that more projects will be soon implemented based on these feasibility studies. For sectoral categorization, projects were categorized into seven sectors-energy technology, energy efficiency, renewable energy, waste management, city, strategic planning and projects related to the country's efforts to reduce emissions from deforestation and forest degradation (REDD+). JCM projects were mitigation focused with more than 70% of projects were related to energy efficiency, renewable energy and energy technology. At the regional and country level, JCM is highly focused on Asia and especially, more than 100 projects were developed in Indonesia. Based on the analysis of JCM, in order to develop bilateral international mechanism for Korea, it is worthwhile to emphasize that Korea considers Asian countries as her partner. In addition, Korea may consider the collaboration with Multilateral Development Banks (MDBs) to implement projects identified by Korea and Asian partner countries. Furthermore, strategically, it is recommendable to develop jointly with Japan who has already capacity and networks with other Asian countries to mitigate GHG emissions. Such financial resources from MDBs and Japan may contribute to meet the 11.3% of GHG reduction target from abroad according to INDC of Korea.

• Korean Journal of Remote Sensing
• /
• 제19권4호
• /
• pp.291-305
• /
• 2003

The cost of deploying Geological and Environmental information gathering systems, especially when such systems obtain remote sensing and photographic data through the use of commercial satellites and aircraft. Besides the high cost equipment required, adverse weather conditions can further restrict a researcher's ability to collect data anywhere and anytime. To mitigate this problem, we have developed a compact, multi-spectral automatic Aerial photographic system. This system's Multi-spectral camera is capable of the visible (RGB) and infrared (NIR) bands (3032*2008 pixel). It consists of a thermal infrared camera and automatic balance control, and can be managed by a palm-top computer. Other features includes a camera gimbal system, GPS receiver, weather sensor among others. We have evaluated the efficiency of this system in several field tests at the following locations: Kyongsang-bukdo beach, Nakdong river (at each site of mulkeum-namji and koryung-gumi), and Kyungahn River. Its tested ability in aerial photography, weather data, as well as GPS data acquisition demonstrates its flexibility as a tool for environmental data monitoring.

• Journal of The Geomorphological Association of Korea
• /
• 제20권4호
• /
• pp.117-131
• /
• 2013

2010 eruption of Eyjafjallajokull volcano in Iceland and 2011 Shinmoedake's eruption in Japan evoked concerns from researchers for the possibility of explosion of Baekdusan volcano after long dormancy (repose period). National Emergency Management Administration has tried to evaluate the vulnerability of volcanic disaster and to prepare response to the potential risk and to mitigate the damages from the volcanic eruption, but a few studies have focused on the activities of Baekdusan. This study aims to clarify what the criteria between dormant volcano and active volcano based on geomorphologists' and geologists' researches. Volcanic experts have made a criterion of activeness such as the evidence of volcanic eruption within 10,000 year before present. More rigorous criterion which was made in 1991 by Japanese Meteorological Administration was 2000 years B.P. Both Baekdusan and Hallasan satisfy two criteria, so it is necessary for us to monitor the activity of both volcanoes and to reflect the facts into the curriculum.

• Proceedings of the Korea Water Resources Association Conference
• /
• 한국수자원학회 2018년도 학술발표회
• /
• pp.155-155
• /
• 2018

Uncertainty in flood forecasting using a coupled meteorological and hydrological model is arisen from various sources, especially the uncertainty comes from the inaccuracy of Quantitative Precipitation Forecasts (QPFs). In order to improve the capability of flood forecast, the uncertainty estimation and mitigation are required to perform. This study is conducted to investigate and reduce such uncertainty. First, ensemble QPFs are generated by using Monte - Carlo simulation, then each ensemble member is forced as input for a hydrological model to obtain ensemble streamflow prediction. Likelihood measures are evaluated to identify feasible member. These members are retained to define upper and lower limits of the uncertainty interval and assess the uncertainty. To mitigate the uncertainty for very short lead time, a blending method, which merges the ensemble QPFs with radar-based rainfall prediction considering both qualitative and quantitative skills, is proposed. Finally, blending bias ratios, which are estimated from previous time step, are used to update the members over total lead time. The proposed method is verified for the two flood events in 2013 and 2016 in the Yeonguol and Soyang watersheds that are located in the Han River basin, South Korea. The uncertainty in flood forecasting using a coupled Local Data Assimilation and Prediction System (LDAPS) and Sejong University Rainfall - Runoff (SURR) model is investigated and then mitigated by blending the generated ensemble LDAPS members with radar-based rainfall prediction that uses McGill algorithm for precipitation nowcasting by Lagrangian extrapolation (MAPLE). The results show that the uncertainty of flood forecasting using the coupled model increases when the lead time is longer. The mitigation method indicates its effectiveness for mitigating the uncertainty with the increases of the percentage of feasible member (POFM) and the ratio of the number of observations that fall into the uncertainty interval (p-factor).

• Structural Engineering and Mechanics
• /
• 제72권4호
• /
• pp.421-432
• /
• 2019

In high-speed railway (HSR) system, the structure-borne noise inside viaduct at low frequency has been extensively investigated for its mitigation as a research hotspot owing to its harm to the nearby residents. This study proposed a novel acoustic optimization method for declining the structure-borne noise in viaduct-like structures by separating the acoustic contribution of each structural component in the measured acoustic field. The structural vibration and related acoustic sourcing, propagation, and radiation characteristics for the viaduct box girder under passing vehicle loading are studied by incorporating Finite Element Method (FEM) with Modal Acoustic Vector (MAV) analysis. Based on the Modal Acoustic Transfer Vector (MATV), the structural vibration mode that contributes maximum to the structure-borne noise shall be hereinafter filtered for the acoustic radiation. With vibration mode shapes, the locations of maximum amplitudes for being ribbed to mitigate the structure-borne noise are then obtained, and the structure-borne noise mitigation performance shall be eventually analyzed regarding to the ribbing conduction. The results demonstrate that the structural vibration and structure-borne noise of the viaduct box girder mainly occupy both in the range within 100 Hz, and the dominant frequency bands both are [31.5, 80] Hz. The peak frequency for the structure-borne noise of the viaduct box girder is mainly caused by $16^{th}$ and $62^{th}$ vibration modes; these two mode shapes mainly reflect the local vibration of the wing plate and top plate. By introducing web plate at the maximum amplitude of main mode shapes that contribute most to the acoustic modal contribution factors, the acoustic pressure peaks at the field-testing points are hereinafter obviously declined, this implies that the structure-borne noise mitigation performance is relatively promising for the viaduct.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• 제29권5호
• /
• pp.1133-1151
• /
• 2019

Insider threats in the field of information security are so important that the research is continuing centering on the institutes attached to the Carnegie Mellon University. On the other hand, we do not have any separate research institutes. In particular, insider threat research on the defense IT environment directly connected with the survival of the country is not proceeding in depth. In addition, due to the specificity of the military, defense IT security has limited research as an academic discipline, and even the establishment of concepts has not been achieved properly. In addition, because of differences in the environment, the US standard can not be borrowed as it is. This paper analyzes the defense IT environment and defines an insider (threat) suitable for the Korea military environment. I'd like to suggest the type of insider threat and how to mitigate it.