• 제목/요약/키워드: mission station

검색결과 164건 처리시간 0.024초

Measurement of Peak-to-Average Power Ratio for HRIT

  • Park Durk-Jong;Yang Hyung-Mo;Ahn Sang-Il
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
    • /
    • pp.498-500
    • /
    • 2004
  • QPSK (Quaternary Phase Shift Keying) will be adopted as the modulation of HRIT (High Rate Information Transmission) which is transmitted to COMS (Communication, Ocean and Meteorological Satellite) through HPA (High Power Amplifier) in ground segment. Due to the nonlinearity of HPA, IMD (Inter-Modulation Distortion) of multi-carrier signals and PAPR (Peak-to-Average Power Ratio) of modulated HRIT must be considered to estimate the output power of HPA. In this paper, we measured the PAPR to various the roll-off factor of RRC (Root Raised Cosine filter) which is filtering the modulated HRIT signal for reducing ISI (Inter-Symbol Interference) and bandwidth. It was found that the minimum PAPR is 2.78dB at 0.5 of roll-off factor for scrambled data. It's 2.78dB of P APR will be in output power selecting in COMS earth station.

  • PDF

Installation of Neutron Monitor at the Jang Bogo Station in Antarctica

  • Jung, Jongil;Oh, Suyeon;Yi, Yu;Evenson, Paul;Pyle, Roger;Jee, Geonhwa;Kim, Jeong-Han;Lee, Changsup;Sohn, Jongdae
    • Journal of Astronomy and Space Sciences
    • /
    • 제33권4호
    • /
    • pp.345-348
    • /
    • 2016
  • In December 2015, we have installed neutron monitor at the Jang Bogo station in Antarctica. The Jang Bogo station is the second science station which is located at the coast ($74^{\circ}\;37.4^{\prime}S$, $164^{\circ}\;13.7^{\prime}E$) of Terra Nova Bay in Northern Victoria Land of Antarctica. A neutron monitor is an instrument to detect neutrons from secondary cosmic rays collided by the atmosphere. The installation of neutron monitor at Jang Bogo station is a part of transferred mission for neutron monitor at McMurdo station of USA. Among 18 tubes of 18-NM64 neutron monitor, we have completed relocation of 6 tubes and the rest will be transferred in December 2017. Currently, comparison of data from both neutron monitors is under way and there is a good agreement between the data. The neutron monitor at Jang Bogo station will be quite useful to study the space weather when the installation is completed.

궤도상 유지보수를 위한 홀추력기 임무해석 (Mission Analysis Involving Hall Thruster for On-Orbit Servicing)

  • 권기범
    • 한국항공우주학회지
    • /
    • 제48권10호
    • /
    • pp.791-799
    • /
    • 2020
  • 2019년 10월 발사된 Northrop Grumman사의 MEV-1(Mission Extenstion Vehicle)은 세계 최초의 무인임무로서 궤도상 유지보수(On-Orbit Servicing)가 실질적으로 가능함을 보였다. 물론 궤도상 유지보수 임무는 수십 년 전부터 제안된 개념으로 운영 중인 위성에 대한 궤도수정 및 유지, 추진제/장비 보급 및 업그레이드, 수리, 궤도상 조립 및 제작, 우주잔해 처리 등 다양한 임무개념으로 발전되고 있으며, 이번 MEV-1 임무의 성공으로 향후 세계적으로 정부기관 및 민간분야 위성사업에서의 시장이 확대될 것으로 예상된다. 궤도상 유지보수 임무는 임무의 특성상 기본적으로 고효율의 전기추진시스템의 활용은 필수적이다. 본 연구에서는 전기추진시스템 중 홀추력기를 활용한 간단한 궤도상 유지보수 임무에 대한 임무해석 내용을 소개하고자 한다. 임무사례로서 정지궤도위성의 수명연장 임무에 대해 다양한 홀추력기 설계변수조합에 대한 설계공간탐색을 수행하고, 설계공간분석 및 최적화를 통해 고려하는 임무에 적합한 홀추력기의 설계 및 운용 파라미터를 제안함과 동시에 임무성능을 도출하였다. 추가적으로 현재 궤도상 유지보수 임무해석 시 개선점과 홀추력기를 활용한 우주임무해석에서의 발전방향을 고찰하였다.

ANGLES ONLY ORBIT DETERMINATION FROM SINGLE TRACKING STATION

  • Lee Byoung-Sun;Hwang Yoola
    • 한국우주과학회:학술대회논문집(한국우주과학회보)
    • /
    • 한국우주과학회 2004년도 한국우주과학회보 제13권2호
    • /
    • pp.304-307
    • /
    • 2004
  • Satellite orbit determination using angles only data from single ground station is carried out. The KOMPSAT-1 satellite mono-pulse angle tracking data from 9-meter S-band antenna at KARI site in Daejeon are used for the orbit determination. Various angle tracking arcs from one-day to five-day are processed and the orbit determination results are analyzed. Antenna pointing data are predicted based on the orbit determination results to check the possibility of re-acquisition and tracking of the satellite signal. Normal satellite mission operations including orbit determination, antenna prediction, satellite re-acquisition and automatic tracking from predicted antenna angle pointing data are concluded to be possible when three-day angle tracking data from single tracking station are used for the orbit determination.

  • PDF

다목적실용위성의 월식 현상 분석 (LUNAR ECLIPSE ANALYSIS FOR KOMPSAT)

  • 김응현;이상률;김학정
    • Journal of Astronomy and Space Sciences
    • /
    • 제15권2호
    • /
    • pp.449-458
    • /
    • 1998
  • 다목적실용위성은 고도 685km의 태양동기궤도를 임무 궤도로 사용하며, 궤도 당 약 34~35분씩 지구에 의해 태양 빛이 가리는 식 현상과 비 주기적으로 달에 의한 월식 현상이 발생한다. 위성의 월식은 달이 태양과 위성 사이에 위치하여 위성에 도달하는 태양 빛을 전체 혹은 부분적으로 가리는 것을 의미한다. 식 현상은 위성 체의 배터리 충전 및 방전 회수를 증가시키며 위성의 수명과 임무 및 운용에 영향을 준다. 다목적 실용위성은 주기적인 지구의 식 현상을 고려하여 설계되었으나 월식이 일어나는 경우 위성 체의 에너지 균형과 배터리 방전에 대한 부수적인 효과와 함께 운용상의 문제를 초래할 수 있다. 본 연구에서는 다목적실용위성의 임무 기간인 3년 동안 위성 운용 중에 발생할 수 있는 월식 현상을 예측하고 이에 대비한 임무 계획을 제시하였다.

  • PDF

통신해양 기상위성 LHGS 설계를 위한 JPEG 성능 분석 (JPEG Performance analysis for COMS LHGS Design)

  • 배희진;서석배;안상일;정성철;김은규
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2006년도 춘계학술대회 논문집
    • /
    • pp.381-385
    • /
    • 2006
  • 2008년 발사를 목표로 개발되고 있는 통신해양기상위성(COMS: Communication, Ocean and Meteorological Satellite)는 기상 관측과 해양 관측 임무 및 통신 임무까지 수행하는 정지궤도 위성이다. 통신해양기상위성은 크게 탑재체와 지상국으로 나눌 수 있고 지상국은 다시 통신 임무를 위한 CTES(Communication Test Earth Station), 해양/기상 임무를 위한 IDACS(Image Acquisition and Control System), 그리고 위성 관제와 운영을 위한 SGCS(Satellite Ground Control System)로 구분된다. 이 중 IDACS의 서브시스템 중 하나인 LHGS(LRIT/HRIT Generation Subsystem)는 LRIT/HRIT(Low Rate Information Transmission/High Rate Information Transmission)를 생성하고 배포하는 기능을 가지고 있다. 관측 종료 후 LRIT/HRIT 전송 완료까지 15분 이내로 이루어져야 한다는 기상청의 요구사항을 만족하기 위해서 JPEG 압축 시간도 중요한 요소로 고려되어야 한다. 그래서 본 논문에서는 MTSAT에서 받은 LRIT/HRIT의 자료 처리를 바탕으로 lossless JPEG와 lossy JPEG의 압축 시간을 측정하여 압축률을 비교하여 성능 분석을 해보기로 한다. 이렇게 도출해낸 수치자료는 COMS LHGS 설계에 활용할 수 있다.

  • PDF

발사 후 3개월간의 궤도 내 시험을 통한 통신해양기상위성 관제시스템의 운용검증 (Operational Validation of the COMS Satellite Ground Control System during the First Three Months of In-Orbit Test Operations)

  • 이병선;김인준;이수전;황유라;정원찬;김재훈;김해연;이훈희;이상철;조영민;김방엽
    • 한국위성정보통신학회논문지
    • /
    • 제6권1호
    • /
    • pp.37-44
    • /
    • 2011
  • 2010년 6월 26일에 발사된 통신해양기상위성(천리안)은 Ka-대역 위성통신, 정지궤도 해양관측, 그리고 기상관측을 위한 탑재체를 가지고 있다. 정지궤도상의 위성을 효과적으로 운용하기 위해서 위성 임무운영 개념을 정립하여 이를 위성관제시스템의 개발 초기 단계부터 적용하였다. 천리안 위성의 임무운영은 일별, 주별, 월별 그리고 계절별 운영으로 구분된다. 위성의 일별운영은 임무계획, 명령계획 및 전송, 원격측정 데이터 처리 및 분석, 위성 거리측정 및 궤도결정, 위성의 궤도 및 이벤트 예측, 그리고 휠 오프로딩 파라미터 계산으로 구분된다. 위성의 주별 운영으로는 화요일에 남북방향 위치유지조정, 목요일에 동서방향 위치유지조정으로 구분된다. 월별운영으로는 위성의 온보드 오실레이터를 갱신하기 위한 비행역학 파라미터 계산과 위성으로의 전송이 수행되며 계절별 운영으로 봄과 가을에는 지구가 태양을 가리는 식에 관련된 위성운영을 수행한다. 이 논문에서는 통신해양기상위성이 발사된 후 약 3개월에 걸친 궤도 내 시험 기간 중에 이루어진 위성관제시스템의 주요 기능들에 대한 운영검증을 기술한다. 이 기간 중에 위성관제시스템의 대부분 기능이 성공적으로 검증되었으며 천리안 위성관제시스템은 위성의 설계 수명기간인 7년 또는 위성이 수명을 다하는 그 이후까지 계속 사용될 예정이다.

우주기술 저변확대를 위한 초소형위성 프로그램: 캔위성 경연대회 (Very Small Satellite Program for Expending the Space Technology Base: CanSat Competition)

  • 원수희;전형열;김성훈;이상률
    • 한국항공우주학회지
    • /
    • 제40권7호
    • /
    • pp.636-645
    • /
    • 2012
  • 본 논문은 우주기술 저변확대를 위한 초소형위성 프로그램 중 하나로 캔위성 경연대회에 대해 살펴보았다. 먼저 캔위성과 인공위성의 차이점을 알아보고 해외 캔위성 경연대회 사례 및 국내 캔위성 개발 동향을 정리하였다. 이를 바탕으로 국내 캔위성 경연대회의 운영조직 및 역할을 제시하였으며, 캔위성, 발사체, 지상국 등과 같은 경연대회 소요기술의 요구조건 및 개발방안을 도출하였다. 또한 경연대회 수행임무, 사전교육, 진행일정 등 경연대회 추진방안을 마련하였다.

천리안위성 궤도상 시험의 지구 관측 임무 운영 (Earth Observation Mission Operation of COMS during In-Orbit Test)

  • 조영민
    • 한국위성정보통신학회논문지
    • /
    • 제8권1호
    • /
    • pp.89-100
    • /
    • 2013
  • 통신, 해양, 기상의 세 분야 복합 임무를 수행하는 천리안위성(Communication Ocean Meteorological Satellite: COMS)이 2010년 6월 27일 지구정지궤도로 발사된 이후 궤도상시험을 마치고 현재 정상운영 임무를 수행하고 있다. 천리안위성은 정지궤도의 동경 $128.2^{\circ}$에 위치한다. 세 임무를 수행하기 위해 천리안위성에는 3가지 탑재체인 기상탑재체(Meteorological Imager: MI), 해양탑재체(Geostationary Ocean Color Imager: GOCI), 통신탑재체(Ka-band Antenna)가 실려 있다. 각 탑재체는 각각의 임무를 전담하여 수행한다. 기상탑재체(MI)와 해양탑재체(GOCI)는 각각 기상 관측과 해양 모니터링을 위한 지구 관측 임무를 수행한다. 궤도상시험 기간 동안 천리안위성과 지상국의 기능과 성능이 지구 관측 임무 운영을 통해 점검되었다. 지구 관측 임무는 지구의 여러 영역에 대한 기상 현상 관측과 한반도 주변의 해양 환경 모니터링으로 구성된다. 천리안위성 궤도상시험에 대한 기상 및 해양 임무 운영 특성을 기술하고 천리안위성 임무 계획에 대해 논하였다. 궤도상시험 임무 운영 결과로서 시험 기간 동안의 임무 계획 결과와 위성 영상 수신 상황에 대한 통계 분석 및 종합 결과를 제시하여 궤도상시험에서 검증된 천리안위성의 임무 운영 능력과 달성된 위성 영상 수신 역량을 연구하였다.

Throughput Analysis of SBC for MSC on KOMPSAT-2

  • Heo H.P.;Kong J.P.;Kim Y.S.;Park J.E.;Chang Y.J.;Lee S.H.
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
    • /
    • pp.593-596
    • /
    • 2005
  • The MSC is a remote sensing instrument with very high performance that is to be installed on KOMPSAT2 satellite. The MSC consists of EOS (Electro-Optic Subsystem), PMU (Payload Management Unit) and PDTS (Payload Data Transmission Subsystem). PMU controls and monitors all the other payload units by sending commands and collecting telemetry. PMU is in charge of interfacing between payload system and satellite bus system. PMU gets commands from ground-station via OBC (On-Board Computer) that is a main controller of the satellite bus system and sends telemetry to the ground-station via OBC. There is a processor module, called SBC (Single Board Computer) in the PMU. The SBC is a main controller of the MSC system. The main roles of the SBC are payload mission management, command validation and execution, telemetry collection and monitoring, ancillary data handling, event reporting, power control of payload sub-units and communication with these units. Intel's 80486DX2 processor has been used for the SBC. Due to the fact that the SBC plays important roles for imaging mission execution and handles a lot of control data that is required for payload operation, it is required to make analysis of the CPU load when it is in maximum operation mode. In this paper, the analysis and measurement results of the SBC throughput in the maximum operation mode.

  • PDF