• 제목/요약/키워드: missile test

검색결과 256건 처리시간 0.022초

무인비행체 풍동시험과 공력해석의 비교 연구 (A COMPARISON STUDY OF WIND TUNNEL TEST AND AERODYNAMIC ANALYSIS FOR TARGET DRONE)

  • 김현일;김재성;이상민;김규태;김맹수
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2010년 춘계학술대회논문집
    • /
    • pp.17-20
    • /
    • 2010
  • An aerial target system is used for the purpose of experimental test and fire training of missile that newly developed and in mass production. Since the target drones of aerial target systems are monopolized by several major countries so that they are selling at a high price. In this paper, we present the CFD simulation results on a new target drone that Kyungan co. ltd is developing with their own technologies. The presented CFD simulation was conducted in the same conditions of a wind tunnel tests and we could obtain the simulation results of the lift and drag values were in errors by less than 15 percent compared to the experiment. The simulation results were used to determine the modified shapes of new prototype target drone that could fly safely.

  • PDF

스파이크와 돔 형상의 공력 가열 해석 (Analysis on Aerodynamic Heating on Spike and Dome Configuration)

  • 정석영;윤성준;변우식
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2002년도 추계 학술대회논문집
    • /
    • pp.109-113
    • /
    • 2002
  • Numerical analysis of aerodynamic heating for KPSAM is performed using aerodynamic heating model suitable to KPSAM, which has complex flow field resulting from the spike attached to the dome, such as large separation area and the strong shock/boundary layer interaction region around reattachment point on the dome. The aerodynamic heating model is validated and modified through the comparison between the flight test measurement and the thermal analysis results. TFD temperature sensors are installed on the dome to measure surface temperature during the flight. Computation results, obtained from the heat transfer analysis on the sensors, agree well with flight test data. The aerodynamic heating model provides heat transfer rate into surface as a boundary condition of unsteady 1D/axisymmetric thermal analysis on the missile structure. The axisymmetric thermal analysis using FLUENT is more versatile than the 1D analysis and can be applied to the heating problem related with complex structures and multi-dimensional heat transfer problems such as prediction of temperature rise at contact surface of different materials.

  • PDF

항공기 탑재 시험을 통한 지상 클러터 반사계수 추정 (Estimation of Ground Clutter Reflectivity based on the CFT(Captive Flight Test))

  • 손창희
    • 한국군사과학기술학회지
    • /
    • 제9권2호
    • /
    • pp.87-95
    • /
    • 2006
  • The performance of a microwave missile seeker and radar operating in an air-to-air look-down mode is strongly influenced by the presence of ground clutter In order to correctly account for the effects of ground clutter, it is required to develop a model capable of representing clutter characteristics as a function of range and/or frequency. In this paper, a program to estimate the clutter reflectivity for various ground conditions is developed, using the actually measured data and the data available from open literatures. In addition, clutter characteristics measured for various ground conditions such as sea, agricultural area, urban city and industrial area through the captive flight tests are presented.

수상함 전투체계 육상시험체계용 개체생성기 구현에 적합한 병렬처리기법에 관한 연구 (A Study on the Parallel Processing of the Object Generator in a Suface Combat System LBTS)

  • 김창진;오광백;정용환
    • 한국군사과학기술학회지
    • /
    • 제13권5호
    • /
    • pp.734-738
    • /
    • 2010
  • Object Generator is a software to provide simulation object data(aircraft, ship, submarine, missile, torpedo) for sumulators in LBTS(Land Based Test System). but there is a burden to the system, because Object generator needs to send many object's data, display objects in a tactical screen, show object's information in a list in 1 second. This paper suggests a parallel software structure taking a few factors(deadlock, dependency) into consideration. At last, the paper shows the performance of the parallel structure's software compared with the former structure's software.

탄도탄 요격미사일 시험을 위한 플러그인 아키텍처 기반 계측데이터 모의 소프트웨어 설계 (Test Headquarter Measurement Emulator Based on Plug-In Architecture For Anti-Ballistic Missile Test)

  • 정영환;위성혁;김세환
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2014년도 추계학술발표대회
    • /
    • pp.634-635
    • /
    • 2014
  • 가상 환경 기반의 시험 수요가 군사 무기체계 분야에서 지속적으로 증가하고 있다. 가상 환경 기반 기술의 증가 이유는 시험 및 평가에서 낮은 비용과 높은 효율을 달성할 수 있기 때문이다. 본 논문에서는 교전환경을 Modeling & Simulation기법으로 가상환경을 만들어 비용을 최소화하고 공간적 제약도 해결할 수 있다. 계측데이터 모의 소프트웨어는 플러그인 아키텍처에 기반을 두어 실 탄도탄 정보를 모의해 탄도탄 요격미사일 시험에 적합한 환경을 구성하도록 설계되었다. 각 기능을 컴포넌트 별로 분리하여 개발해 특정 모델을 Third party 형태로 개발할 때 유용한 구조임을 설명한다.

북한의 발사체발사에 따른 법적 쟁점 : UN 안전보장이사회 결의의 성격과 한계 (Legal Issues Regarding the Launch Vechicle by DPRK : the Scope and Limit of the UN Security Council Resolution)

  • 신홍균
    • 항공우주정책ㆍ법학회지
    • /
    • 제31권1호
    • /
    • pp.145-167
    • /
    • 2016
  • 안전보장이사회는 국제연합헌장 제7장 제39조에 따라 평화에 대한 위협, 평화의 파괴 또는 침략행위의 존재를 결정할 권한을 갖고 있으며, 이에 안보리 결의가 헌장 제7장에 따름을 명시하는 경우 그 결의가 그러한 안보리의 결정을 확정하는 문서를 구성한다. 또한 헌장 제25조에 따라서 회원국은 안보리 결정을 수락하고 이행하여야 할 의무를 부담하므로, 안보리 결정을 확정하는 그러한 안보리 결의의 회원국에 대한 법적 구속력이 인정된다고 해석된다. 안보리 결의를 용어의 선택 관점에서 살펴 보면, 탄도미사일 프로그램 관련 활동을 중지(suspend)하는 것에 대해서는 결정(decide)이고, 탄도미사일을 발사하지 않을 것에 대해서는 요청(demand), 그리고 미사일실험유예조치로의 복귀에 대해서는 요청(demand)이라는 점이 주목된다. 안보리의 수차례의 결의에서 탄도미사일에 관련된 모든 활동의 중지를 결정하는 조항과 탄도미사일 기술을 이용하는 모든 발사의 금지를 촉구하는 조항 및 그 촉구를 결정으로 보는 조항은 1967년 우주조약에 규정되지 않은 평화적 목적의 내용을 정하는 성격을 갖거나 또는 위와 마찬가지로 특정 경우에만 적용되는 안보리의 결정이다. 다른 한편으로는 발사금지를 결정하는 안보리결의는 북한에 대한 제재에 한정된다고 볼 수 있다. 학설상 WMD에 관련된 안보리의 결의도 결정(decide)라는 용어를 택하고 있어서 구속력 있는 의무를 부과하는 것으로 인정되지만, 법의 제정에는 못미치고 단순한 제재의 결정에 그친다고 보기도 한다. 국제평화에 대한 위협의 존재를 결정하고 그에 대한 제재를 내용으로 하는 안보리 결정을 둘러싸고, 그 결정에 이르는 국가간 합의의 방식이 과연 국제법상의 입법에 이를 정도인가에 대한 의문이 북한의 발사체 발사에 대한 결정에 있어서도 제기된다고 판단된다. 또한, 우주공간과 그 공간에서 국가들의 우주활동을 규율의 객체로 하면서, 모든 국가의 보편적인 권리와 의무를 규율함을 목적으로 하는 우주법의 성격상 안보리 이사국들의 합의에 따르는 안보리의 결정이 우주법의 특별법으로서의 지위를 갖는다고 판단하기는 어렵다. 이에 안보리 결의는 우주법의 내용을 구체화하는 입법이 아니라 북한에 대한 제재에 한정된다고 판단된다.

원편파 특성을 갖는 Ku-밴드 원형도파관 안테나 설계 및 제작 (The Design and Manufacture of Ku-Band Circular Waveguide with Circular Polarizaed Wave Characteristic)

  • 이성재
    • 한국군사과학기술학회지
    • /
    • 제4권1호
    • /
    • pp.124-136
    • /
    • 2001
  • In this paper, we designed and manufactured the Ku-band circular waveguide antenna to do wireless communication with a ground radar as on-board antenna of missile. Using the MATLAB and the HFSS, we designed the circular polarizer which has a characteristic of circular polarization and broadband using the capacitive pin method, the feeder to feed coaxial line to circular waveguide, and a stopper to prevent a conductor material from being inserted. Then we simulated the designed antenna using the HFSS, obtained the gain and the radiation pattern. Because of a difficulty of manufacture, we established a manufacture process procedure. Antenna is manufactured with this procedure, test results of the manufactured antenna are the axial ratio of 1.37 ~ 1.72, the 3 ㏈ beamwidth of $72.23^{\circ}{\sim}78.54^{\circ},$ and the gain of 3.26 ~ 4.61 ㏈ within frequency band. We knew that these results are similar with simulation results. Also, we confirmed that the manufactured antenna is satisfied with requirement conditions through performance test, environmental test and flight test.

  • PDF

DEVS형식론을 적응한 HLA기반의 분산 실시간 시뮬레이션 시스템 개발 (Development of the Distributed Real-time Simulation System Based on HLA and DEVS)

  • 김호정;이재현;조길석
    • 한국군사과학기술학회지
    • /
    • 제9권3호
    • /
    • pp.25-32
    • /
    • 2006
  • Weapon systems composed of several subsystems execute various engagement missions in distributed combat environments in cooperation with a large number of subordinate/adjacent weapon systems as well as higher echelons through tactical data links. Such distributed weapon systems require distributed real-time simulation test beds to integrate and test their operational software, analyze their performance and effects of cooperated engagement, and validate their requirement specifications. These demands present significant challenges in terms of real-time constraints, time synchronization, complexity and development cost of an engagement simulation test bed, thus necessitate the use of high-performance distributed real-time simulation architectures, and modeling and simulation techniques. In this paper, in order to meet these demands, we presented a distributed real-time simulation system based on High Level Architecture(HLA) and Discrete Event System Specification(DEVS). We validated its performance by using it as a test bed for developing the Engagement Control System(ECS) of a surface-to-air missile system. The proposed technique can be employed to design a prototype or model of engagement-level distributed real-time simulation systems.

X-51의 PWR X-1 탄화수소 연료 스크램제트 엔진 핵심 기술 고찰 (Survey on the Core Technologies of Hydrocarbon-fueled PWR X-1 Scramjet Engine for X-51)

  • 노진현;원수희;최정열
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2008년도 제30회 춘계학술대회논문집
    • /
    • pp.303-306
    • /
    • 2008
  • 미국은 X-43A 를 통한 스크램제트 무인기의 비행 시험을 성공적으로 마치고 미공군 주도하에 X-51A 스크램제트 기술 실증기를 개발하고 있다. X-51A는 PWR 사의 X-1 탄화수소 연료 스크램제트 엔진을 이용하여 2008년에 지상시험을 마치고 2009년에 비행시험이 계획되어 있으며, 이를 통하여 X-51A에서 확립된 기술은 향후 DARPA의 Falcon 프로그램에 의한 HTV-3X 극초음속 시험기 및 HCV 순항기 개발에 적용될 것이다. 본 논문에서는 액체 및 초임계 JP-7 연료를 이용한 엔진 구조물의 냉각 및 연소 등 X-51의 추진기관 핵심 기술에 대하여 살펴보고자 한다.

  • PDF

유도무기의 비행시험 결과 예측 및 분석을 위한 현장 영상 기반 시뮬레이션 기법 연구 (Study on On-Sight Image-Based Simulation Method for Predicting and Analyzing Flight Test Results of a Missile)

  • 정동길;박진서;이종희;손성한
    • 한국시뮬레이션학회논문지
    • /
    • 제28권3호
    • /
    • pp.41-48
    • /
    • 2019
  • 현대전에서 중시되는 부수피해 최소화를 위한 정밀타격 유도무기에는 적외선 영상탐색기가 주로 적용되는데, 고가의 적외선 센서를 탑재한 일회성 유도무기의 성능평가에는 많은 비용이 소모되게 된다. 이러한 비용 소모를 최소화하기 위해 시뮬레이션 기법을 통해 유도무기의 성능 예측을 수행하는데, 합성 적외선 영상을 적용한 시뮬레이션 기법이 대표적이다. 하지만 합성영상 적용 기법은 실제 영상과의 특성 차 및 다양한 환경 조건에 따라 변화하는 영상의 특성을 모두 고려하기 힘들다는 제한 사항을 가진다. 본 논문에서는 기존의 시뮬레이션 제한 사항을 보완하기 위한 계측 영상 기반 시뮬레이션 기법을 제안한다. 유도탄 발사 전에 획득되는 영상은 표적의 대조비 또는 온도차 등을 확인하여 영상 추적기의 성능발휘 조건 판단 목적으로만 적용되어 왔으나, 낮은 해상도 및 정보량 부족으로 통합 비행 시뮬레이션에 적용되는 시도조차 없었다. 하지만 본 논문에 기술한 연구를 통하여 현장 계측 영상을 적용한 통합 비행 시뮬레이션은 초기, 중기 비행 간의 유도탄 비행 성능을 상당히 유사하게 예측할 수 있으며 비행시험 결과 분석에 유용하게 활용할 수 있음을 확인하였다.