• Current Optics and Photonics
• /
• 제6권2호
• /
• pp.171-182
• /
• 2022

A single-photon laser and mid-wave infrared (MWIR) common aperture optical system was designed and developed to detect and range a long-distance civil aviation aircraft. The secondary mirror of the Ritchey-Chretien (R-C) optical system was chosen as a dichroic lens to realize the design of a common aperture system for the laser and MWIR. Point spread function (PSF) ellipticity was introduced to evaluate the coupling efficiency of the laser receiving system. A small aperture stop and narrow filter were set in the secondary image plane and an afocal light path of the laser system, respectively, and the stray light suppression ability of the small aperture stop was verified by modeling and simulation. With high-precision manufacturing technology by single point diamond turning (SPDT) and a high-efficiency dichroic coating, the laser/MWIR common aperture optical system with a 𝜑300 mm aluminum alloy mirror obtained images of buildings at a distance of 5 km with great quality. A civil aviation aircraft detection experiment was conducted. The results show that the common aperture system could detect and track long-distance civil aviation aircraft effectively, and the coverage was more than 450 km (signal-to-noise ratio = 6.3). It satisfied the application requirements for earlier warning and ranging of long-range targets in the area of aviation, aerospace and ground detection systems.

• Journal of Mechanical Science and Technology
• /
• 제17권11호
• /
• pp.1704-1713
• /
• 2003

Point contact film thickness in elastohydrodynamic lubrication (EHL) is analyzed by image processing method for the images from an optical interferometer with monochromatic incident light. Interference between the reflected lights both on half mirror Cr coating of glass disk and on super finished ball makes circular fringes depending on the contact conditions such as sliding velocity, applied load, viscosity-pressure characteristics and viscosity of lubricant under ambient pressure. In this situation the film thickness is regarded as the difference of optical paths between those reflected lights, which make dark and bright fringes with monochromatic incident light. The film thickness is computed by numbering the dark and bright fringe orders and the intensity (gray scale image) in each fringe regime is mapped to the corresponding film thickness. In this work, we developed a measuring technique for EHL film thickness by dividing the image patterns into two typical types under the condition of monochromatic incident light. During the image processing, the captured image is converted into digitally formatted data over the contact area without any loss of the image information of interferogram and it is also interpreted with consistency regardless of the observer's experimental experience. It is expected that the developed image processing method will provide a valuable basis to develop the image processing technique for color fringes, which is generally used for the measurement of relatively thin films in higher resolution.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권7호
• /
• pp.418-423
• /
• 2000

The fiber Fabry-Perot interferometric(FFPI) sensor is well known in the field of industrial diagnosis due to its outstanding properties such as tiny size, simple and rugged structure, and easy interrogation. As other fiber interferometric sensors, it also suffers from ambiguous output caused by highly periodic feature in its optical transfer function. In most cases, the ambiguity leads to relatively short dynamic operating range and long processing time during power-on reset, which limits its application to some specific fields requiring very high resolution. In this paper a method based on double sensing scheme was proposed to overcome the above difficulty. By employing a fringe selection auxiliary FFPI sensor the original FFPI sensor can identify its true position on the phase domain. The performance test with 10mm FFPI sensor and a thermocouple temperature sensor for reference shows wide dynamic range 0-900$\ell$ keeping a reasonable resolution of 0.1$\ell$ over the entire range.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2010년도 한국우주과학회보 제19권1호
• /
• pp.25.4-26
• /
• 2010

We present a three-mirror anastigmat(TMA) optical system for New Generation GOCI. In order to reduce the ghost optimized filter and baffle. By using carefully chosen antireflective coating and tilted filter angle, we fulfilled the design SNR requirement of 1500. We then designed a new entrance baffle and an internal baffle capable of producing the ghost ratio better than 0.01% of the nominal signal. The entrance baffle limits FOV to $0.75^{\circ}$ (E/W) $\times$ $0.60^{\circ}$ (S/N), and prevents the system from strong sun illumination, and the internal baffle prevents stray and scattered ray from entering into the telescope cavity. From these filter and baffle design, we confirmed that the instrument signal to noise ratio can be met with the current conceptual opto-mechanical design.

• 동의생리병리학회지
• /
• 제22권2호
• /
• pp.487-496
• /
• 2008

The purpose of this study is to investigate clinical frequency and priority of five pattern identification settled by Korean Standard Differentiation of the Symptoms and Sign for Stroke. The present study was done over 177 hospitalized patient with stroke in the Daejeon University Oriental Medical Hospital in the period of November 2006 to July 2007. Stroke patients had been interviewed by residents and specialists who studied standard operation procedures in Fundamental study for Standardization and Objectification of Differentiation and Pattern Identification of Syndrome of Oriental Medicine for Stroke. In Heat-transformation pattern group, men showed significantly high frequency and in Deficiency of Gi pattern group, women showed significantly high frequency. In Heat-transformation pattern group, the indicators such as 'aversion to heat during fever', 'flushed face', 'full and rapid pulse', 'dryness of the eyes, 'yellow coating of the tongue', 'feverishness of the limbs', 'dryness of the eyes' showed significantly high frequency. In Dampphlegm syndrome group, the indicators such as 'white coating of the tongue', 'yellowish face', 'thick coating of the tongue', 'wheezing in the throat with sputum', 'swollen tongue', 'slippery pulse' showed significantly high frequency. In Deficiency of Gi pattern group, the indicators such as 'pale tongue', 'lassitude', 'pale face', 'weakness pulse' showed significantly high frequency. In Deficiency of Eum group, the indicators such as 'short and rapid pulse', 'mirror-like tongue' showed significantly high frequency. For more sensitive Korean Standard Differentiation of the Symptoms and Signs for Stroke, Large scale study is to be done, giving weight on the important indicators.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.81-81
• /
• 2011

Sol-gel spin-coating법을 이용하여 ZnO 박막을 증착하였다. Sol 전구체 용액을 Si(100) 기판에 증착하고 전열처리(pre-heat treatment)하여 gel 상태의 ZnO 박막을 형성시킨 후 다른 속도로 냉각시켰다. Atomic force microscopy (AFM), X-ray diffraction (XRD), Raman, photoluminescence (PL)을 이용하여 냉각속도가 ZnO 박막의 구조적 및 광학적 특성에 미치는 영향을 분석하였다. 느린 속도($5^{\circ}C$/min)로 냉각시킨 ZnO 박막은 나노섬유질구조(nano-fibrous structure)를 나타내었고, 상온에서 바로 냉각시킨 ZnO 박막은 매우 매끄러운 표면(mirror-like surface)을 나타내었다. ZnO (100), ZnO (002), ZnO (101) 방향을 나타내는 회절피크가 관찰되었고, 냉각속도에 따른 ZnO 박막의 배향성을 알아보기 위하여 texture coefficient (TC)를 계산해 보았다. 상온에서 바로 냉각시킨 ZnO 박막(TC(002)=76.3%)이 느린 속도로 냉각시킨 박막(TC(002)=45.2%)보다 (002) 방향으로의 배향성이 우세하게 나타났으며, 잔류응력도 작았다. 뿐만 아니라 PL을 이용한 광학적 특성평가에서도 상온에서 바로 냉각시킨 ZnO 박막에서 더 강한 강도와 좁은 반치폭(full-width at halt-maximum)을 갖는 near-band-edge emission (NBE) 피크가 관찰되었다. 후열처리에 따른 구조적 및 광학적 특성 변화 또한 연구하였다.

• Applied Microscopy
• /
• 제41권4호
• /
• pp.223-228
• /
• 2011

백색광 주사간섭계는 다양한 시료의 표면 특성을 분석하기 위하여 널리 활용되고 있다. 이 기법은 재료공학 분야에서 오래 전부터 이용되었으며 정성적인 형상 이미지 이외에도 정량적인 3차원 결과를 제공한다. 이 기법에서는 백색광을 광원으로 이용하는데, 기준면과 측정면에서의 반사광을 합쳐서 형성되는 간섭신호를 형태 정보로 활용한다. z축 결과인 고도는 회색수준으로 구분되어 제시된다. 이 기법을 통하여 대영역으로 생물 시료를 신속하고 비파괴적으로 형태를 계측할 수 있다. 연골세포, 치아 법랑질, 식물 잎을 대상으로 적용한 사례가 있다. 특히 표면 구조물의 폭, 길이, 경사각과 같은 특성도 이 기법을 통하여 정량화할 수 있다. 이 기법을 적용하기 위하여 일정 수준의 반사도가 필요한데, 식물 잎에서의 반사도는 그 요건을 충족하였다. 전도성 금속의 코팅 등 부가적인 시료 전처리가 필요 없으므로 이 기법을 통한 생물 시료의 정량적 측정이 더욱 증가할 것으로 예상한다.

• 한국표면공학회지
• /
• 제47권5호
• /
• pp.263-268
• /
• 2014

Nanocrystalline diamond(NCD) coated SiC balls were applied in a ball-on-disk tribometer. After seeding in an ultrasonic bath containing nanometer diamond powders, $2.2{\mu}m$ thick NCD films were deposited on sintered 3 mm diameter SiC balls at $600^{\circ}C$ in a 2.45 GHz microwave plasma CVD system. Bare $ZrO_2$ and SiC balls were prepared for comparison as test balls. Tribology tests were performed in air with pairs of three different balls and mirror polished steel(SKH51) disk. The wear tracks on balls and disks were examined by optical microscope and alpha step profiler. Under the load of 3 N, the friction coefficients of steel against $ZrO_2$, SiC and NCD-coated balls were between 0.4 and 0.8. After a few thousands sliding laps, the friction coefficient of NCD-coated balls dropped from 0.45 to below 0.1 and maintained thereafter. Under a higher load of 10 N or 20 N with a long sliding distance of 2 km, $ZrO_2$ and SiC balls exhibited the similar friction coefficients as above. The friction coefficient of NCD-coated balls was less than 0.1 from the beginning and increased to above 0.1 steadily or with some fluctuations as sliding distance increased. NCD coating layers were found worn out after long duration and/or high load sliding test, which resulted in the friction coefficient higher than 0.1.

• 한국광학회지
• /
• 제26권2호
• /
• pp.83-87
• /
• 2015

본 논문은 자외선 광학센서 개발에 관한 것이다. 기존에 반도체 기반 자외선 센서를 대체하기 위해 개발된 단주기 광섬유격자기반 자외선 센서에 대한 측정 민감도를 향상시키기 위한 다양한 장치들을 설계하고 실험을 통해 성능을 확인하였다. 최근 연구를 통해 자외선 흡수에 따라 인장력이 유도되는 아조벤젠 폴리머 재료와 장력에 따른 광섬유격자 특성 변화를 조합하여 새로운 자외선 센서의 개념이 제시되었다. 본 연구에서는 광섬유격자 기반 자외선 센서에서 흡수하지 못하고 통과되는 자외선 잔광을 반사판을 이용해서 다시 반사시켜 센서에서 재흡수되는 원리로 센서의 민감도를 향상시켰다. 본 논문에서는 반사판의 종류를 선정하고 반사판의 곡률반경을 최적화하였다. 또한 기존의 원통형 집광렌즈를 이용한 민감도 향상 기술을 접목 시켜 아무런 장치가 없을 때와 비교해서 약 15배의 성능을 향상시키는 결과를 얻었다. 또한 외부 환경 효과를 줄이기 위한 패키지 모듈을 제작하여 적용하고 그 특성을 분석하였다.

• 한국광학회지
• /
• 제33권1호
• /
• pp.22-27
• /
• 2022

격자의 구조가 간단하고 격자의 대조비가 낮은 SBC 시스템 구성을 위한 무편광 유전체 다층박막 회절격자를 제작하였다. 제작된 박막의 굴절률과 두께 오차로 인하여, 제작된 회절격자의 회절 효율은 설계보다 낮은 값을 나타내었다. 오차를 발생시킨 원인을 분석하고, 제작된 회절격자 위에 추가의 코팅을 통하여 회절 효율 보정이 가능함을 시뮬레이션을 통하여 확인하였다. 시뮬레이션 결과를 확인하기 위하여 제작된 회절격자 위에 Ta₂O₅ 추가층을 제작하고 회절격자를 측정한 결과 회절 효율 보상이 이루어졌으며, 최고 91.7%의 무편광 회절 효율을 얻었다.