• Journal of Bio-Environment Control
• /
• v.32 no.2
• /
• pp.172-180
• /
• 2023

This study was carried out to determine the sprouting period of early and mid-season varieties, which includes 'Atlantic', 'Chubaek', and 'Superior', during the summer storage period in a semi-underground warehouse without cooling system. And also it was investigated the effect of chlorpropham [Propan-2-yl N-(3-chlorophenyl)carbamate, CIPC] treatment on the sprouting inhibition for the varieties. This study was conducted to figure out a sprout inhibitory effect when CIPC was applied to 1kg of the potato tubers at concentrations of 10 mg and 20 mg which are lower than the treatment concentrations of ca 30 mg prescribed by the positive list system (PLS). The internal temperature of the warehouse used in this experiment was lowered by 5℃ or more than the outside temperature. The difference between the lowest and highest temperature during the experiment throughout the day was 5℃. It showed the effect of reducing to 1/2 of the difference in outdoor temperature. As for the sprouting of potatoes, the extremely early variety 'Chubaek' sprouts appeared at the 6th week of storage of control and it was the fastest sprouting potato among the control groups of the varieties. Sprouting began to appear in the Superior at the 6th week of storage, while the 'Atlantic' sprouted at the 8th week of storage. The appearance of sprouts was suppressed in all treatment groups of 'Atlantic' and 'Superior' varieties in CIPC treatments. Sprouts were observed in all treatment groups of 'Chubaek' after the 7th week, but the elongations of the sprouts in tubers were completely inhibited until the 8th week of storage. 'Atlantic' and 'Superior' seemed to have a sprouting inhibitory effect even with a low CIPC concentration of 10 mg·kg^-1, with the exception of extremely early variety 'Chubaek' that breaks out of the dormancy quickly. Although weight loss occurred continuously during storage, it was minor loss of 0.7-1.6%. There was no consistent trend for changes of the loss in the varieties and CIPC treatments. Most common pathological disorder was the dry rot during the experiment, but only few were affected. The use of the tubers treated at 18℃ and 90% RH for 10 days and the rack of refrigeration system which lead to lack of convection seemed to have suppressed the spread of pathogens.

• Journal of Korea Water Resources Association
• /
• v.55 no.spc1
• /
• pp.1251-1260
• /
• 2022

Recently, due to the deterioration of watermains and the detachment of scale which is accumulated on the watermain surface, water quality accidents in a water supply network occur frequently. As scale accumulated on watermains is stabilized, it may not cause water quality accidents under the normal operating condition. However, due to water hammer or transient flow caused by the abrupt velocity and/or direction of flow change, it can be detached from the watermain surface resulting in water quality accidents. To prevent these kinds of water quality accidents, it is required to remove scale by watermain cleaning regularly. Many researches about flushing which is the most popular water cleaning method are focused on the desirable velocity criteria and the cleaning condition to accomplish the effect of flushing whereas less amount of research effort is given to develop a method to consider whether the desirable velocity for flushing can be obtained before flushing is performed. During flushing, the major and minor headloss is occurred when flushing water flows through a hydrant or drain valve. These headloss may slow down the velocity of flushing water so that it can reduce the flushing effect. Thus, in this study, we suggest a method to simulate the flow velocity of flushing water using "MinorLoss Coefficient" and "Emitter Coefficient" in EPANET. The suggested method is applied to a sample network and the water supply network of "A" city in Korea to compare the flushing effect between "flushing through a hydrant" and "flushing through a drain valve". In case of "flushing through a hydrant", if the hydraulic condition ocurring from a watermain pipe connecting to the inlet pipe of a hydrant to the outlet of a hydrant is not considered, the actual flowrate and velocity of a flow is less than the simulated flowrate and velocity of a flow. In case of "flushing through a drain valve", the flushing velocity and flowrate can be easily simulated and the difference between the simulated and the actual velocity and flowrate is not significant. Also, "flushing through a drain valve" is very effective to flushing a long-length pipe section because of its efficiency to obtain the flushing velocity. However, the number and location of a drain valve is limited compared to a hydrant so that "flushing through a drain valve" has a limited application in the field. For this reason, the engineer should consider various field conditions to come up with a proper flushing plan.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.73.2-74
• /
• 2015

The gas cloud G2 falling toward Sagittarius A* (Sgr A*), the supermassive black hole at the center of the Milky Way, is supposed to provide valuable information on the physics of accretion flows and the environment of the black hole. We observed Sgr A* with four European stations of the Global Millimeter Very Long Baseline Interferometry Array (GMVA) at 86 GHz on 1 October 2013 when parts of G2 had already passed the pericenter. We searched for possible transient asymmetric structure - such as jets or winds from hot accretion flows - around Sgr A* caused by accretion of material from G2. The interferometric closure phases (which are zero if the spatial brightness distribution of the target is symmetric, and deviate from zero otherwise) remained zero within errors during the observation time. We thus conclude that Sgr A* did not show significant asymmetric (in the observer frame) outflows in late 2013. Using simulations, we constrain the size of the outflows that we could have missed to ${\approx}2.5$ mas along the major axis, ${\approx}0.4$ mas along the minor axis of the beam, corresponding to approximately 232 and 35 Schwarzschild radii, respectively; we thus probe spatial scales on which the jets of radio galaxies are suspected to convert magnetic into kinetic energy. As probably less than 0.2 Jy of the flux from Sgr A* can be attributed to accretion from G2, one finds an effective accretion rate ${\eta}M{\leq}1.5{\times}10^9kg/s{\approx}7.7{\times}10^{-9}M_{earth}/yr$ for material from G2. Exploiting the kinetic jet power-accretion power relation of radio galaxies, one finds that the rate of accretion of matter that ends up in jets is limited to $M{\leq}10^{17}kg/s{\approx}0.5M_{Earth}/yr$ less than about 20% of the mass of G2. Accordingly, G2 appears to be largely stable against loss of angular momentum and subsequent (partial) accretion at least on time scales ${\leq}1$ year.

• Korean Journal of Poultry Science
• /
• v.45 no.3
• /
• pp.137-145
• /
• 2018

This study was carried out to investigate the effect of carcass weight on the physicochemical and sensory traits of duck meat. In total, 150 duck carcasses were divided into five different weight groups. The fat content in both breast and leg meats tended to increase with increased carcass weight. The cooking loss was significantly higher in the <2,200 g weight group and decreased with increased carcass weight. There was no significant difference in pH, water-holding capacity, lightness, or redness among carcass weight groups. The shear force was significantly higher in the ${\geq}2,800g$ weight group. The oleic acid (C18:1, n9) content in both the breast and leg meats tended to increase with increased carcass weight. The unsaturated fatty acid content in the breast meats was similar for all the groups whereas its content in the leg meats increased with increased weight groups. There was no significant difference in the sensory scores among the treatments. Taken together, it may be said that the carcass weight had minor effects on the physicochemical traits of duck meat. Further studies are needed to determine the effects of different carcass weights in the same raising period on duck meat quality.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.11
• /
• pp.1486-1490
• /
• 2007

This study was performed to evaluate the effect of the fermented beef rib sauce (FBS) on the change of quality characteristics and sensory properties of aged and seasoned beef rib with FBS. The FBS was manufactured by fermentation with Zygosaccharomyces rouxii Y-80 yeast in raw sauce ingredients. The decreasing changes of pH of seasoned beef rib with FBS showed a similar pattern as compared with seasoned beef rib by non-fermented beef rib sauce (NFBS) during aging periods. The cooking loss of the seasoned beef rib with FBS and NFBS exhibited minor changes, respectively. Water holding capacity of the seasoned beef rib with FBS was nearly unchanged, but that of the seasoned beef rib with NFBS increased from 83% to 91% after 5 day aging. Shear forces of the seasoned beef rib with FBS were lower than those of the seasoned beef rib with NFBS. The yellowness and lightness of the seasoned beef rib with FBS decreased as compared with the seasoned beef rib with NFBS, but redness of the seasoned beef rib with FBS was more stable than that of the seasoned beef rib with NFBS. The sensory evaluation indicated that color, aroma and overall acceptability of the seasoned beef rib with FBS were scored relatively higher than those of the seasoned beef rib with NFBS.

• Applied Microscopy
• /
• v.40 no.1
• /
• pp.1-8
• /
• 2010

The ultrastructure of spermatogenesis and sperm in Chinese minnow, Rhynchocypris oxycephalus belonging to Leuciscinae was investigated by light and electron microscopes. The whitish testis was located between intestine and air bladder. The size of testis was major axis 2.3 cm, minor axis 6 mm. The testis contained numerous testicular cysts, and spermatogenesis was non-synchronized in these testicular cysts. In the case of spermatogonium, the nucleus was comparatively large ellipsoidal, and mitochondria showed a marked development. The size of primary spermatocyte was smaller than that of spermatogonia, and secondary spermatocyte was smaller than primary spermatocyte. The chromatin of spermatocyte was highly condensed according to their development. The nucleus with electron-dense was round shape. In spermiogenesis, flagella started to be formed and chromatin was more condensed. The mitochondria were rearranged in a middle piece. The sperm was formed by loss of cytoplasm. The head of mature sperm was a spherical shape and have not acrosome. The microtubules of flagella were arranged 9+2 structure. Also, the tail of sperm have not lateral fins.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.2
• /
• pp.177-182
• /
• 2008

The Gemological characteristics of B.C. jade from Cassiar Mine, British Colombia, Canada, have been investigated, using polarizing microscopy, Mohs' hardness, refractive index and density measurements, X-ray powder diffraction, X-ray fluorescence spectrometry, ICP-MS, Infrared absorption spectrometry, and DTA/TGA. The B.C. jade is deeply green (spinach peen or olive green) in color and is translucent. It shows a resinous or waxy luster. The principal mineral of the material is tremolite-actinolite solid solution and minor amount of Cr-garnet and unidentified opaque minerals are accompanied. Mohs' hardness value ($5.5{\sim}6$). refractive index (1.62), and specific gravity (3.01) are measured. It is very highly tough and shows hackly fracture. The high Fe content ($Fe_2O_3\;4.14{\sim}4.66\;wt%$) in B.C. jade is attributable to a deepening of green color of the material. The B.C. jade starts to dehydrate at v and dehydration is completed at $1000.8^{\circ}C$, transforming tremolite-actinolite solid solution to enstatite, diopside, quartz, and water in its place. This possible reaction is supported by the weight loss of B.C. jade (1.93 wt%) at $1000.8^{\circ}C$ indicated by TGA curve.

• The Journal of the Korean bone and joint tumor society
• /
• v.1 no.2
• /
• pp.133-144
• /
• 1995

After resection of intraarticular, periacetabulum(P2) and pubic rami(P23) and extraarticular, proximal femur(P2-H12) by Enneking classification, reconstruction is very difficult. We experienced three cases of saddle prostheses for reconstruction after P2, P23, and P2-H12 resection in pelvic malignancies. Case 1 was a high grade chondrosarcoma in 36 year-old-man and P2 resection was done. But he died of disease 19 months after operation. Case 2 was a malignant giant cell tumor in 32 year-old-woman. P23 resection was given and she is disease-free 32 months after operation. Case 3 was an osteosarcoma of 27-year-old-man and P2-H12 resection was performed and he is disease-free postoperative 12 months now. According to MSTS functional evaluatin system, all three patients showed no pain(5), intermediate function(2), emotinally satisfied(3), one cane or crutch supported(1), limited walking(3), and minor cosmetic gait(3). There was no significant complication and no dislocation except intermittent inguinal hernia in case 2. All patients started crutch walking 3 weeks after operation. Around 6 months postoperatively, the preserved iliac wing(P1 component) was hypertrophied enough to endure the full weight bearing. All could have squating and kneeling positions. In conclusion, saddle prosthesis would be a very useful method of reconstruction after P2, P23, and/or H1-2 resection to shorten the operation time and to reduce the infection rate without significant loss of function.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.11 no.1
• /
• pp.55-61
• /
• 2013

The recovery of Zr from Zircaloy-4 (Zry-4) cladding hulls using a chlorination method was demonstrated for complete conversion of Zr into $ZrCl_4$. A chlorination reaction was performed by reacting Zry-4 hulls for 8 h under a 70 cc/min $Cl_2$ + 70 cc/min Ar flow at $380^{\circ}C$. The initial weight of the reactant (51.7 g) decreased to 0.49 g after 8 h of operation, which is only 0.95wt% of the initial weight. The weight of the total reaction products was 121.7 g with a high Zr purity of 99.80wt%. Fe and Sn were identified as major (0.18wt%) and minor (0.02wt%) impurities of the reaction products, respectively. It was also shown that Zr exhibited a high recovery ratio of 96.95wt% with a relatively small experimental loss of 2.34wt%. Observation of the reaction residues revealed that the chlorination reaction was dominant along the longitudinal direction, and surface oxide layers remained as reaction residues. The high purity and recovery ratio of Zr proposed the feasibility of the chlorination technique as an effective hull waste treatment method.

• Journal of KIISE
• /
• v.41 no.9
• /
• pp.728-743
• /
• 2014

Finger printing and sequence alignment are well-known approaches for document similarity comparison. A fingerprinting method is simple and fast, but it can not find particular similar regions. A string alignment method is used for identifying regions of similarity by arranging the sequences of a string. It has an advantage of finding particular similar regions, but it also has a disadvantage of taking more computing time. The Multi-Level Alignment (MLA) is a new method designed for taking the advantages of both methods. The MLA divides input documents into uniform length blocks, and then extracts fingerprints from each block and calculates similarity of block pairs by comparing the fingerprints. A similarity table is created in this process. Finally, sequence alignment is used for specifying longest similar regions in the similarity table. The MLA allows users to change block's size to control proportion of the fingerprint algorithm and the sequence alignment. As a document is divided into several blocks, similar regions are also fragmented into two or more blocks. To solve this fragmentation problem, we proposed a united block method. Experimentally, we show that computing document's similarity with the united block is more accurate than the original MLA method, with minor time loss.