자연적 경관이 빼어난 지역에 위치한 석회석 노천광산의 경우 친환경생태학적 개발 및 복원에 대한 요구가 증대됨에 따라 각종 환경 및 경관 관련 민원이 지속적으로 야기되고 있다. 따라서 본 연구에서는 백두대간에 위치한 석회석 노천광산을 대상으로 항공레이저측량과 지상레이저측량을 융합하여 대상지역의 지능형국토정보 구축을 수행함으로써 대상지역의 석회석 채광으로 인한 지속적인 모니터링 방안을 정립하고, 고품질 지형정보를 통한 각종 환경 관련 문제 및 복원계획의 합리적인 추진에 기여하고자 한다.
The lattice-spring-based synthetic rock mass model (LS-SRM) technique has been extensively employed in large open-pit mining and underground projects in the last decade. Since the LS-SRM requires a complex and time-consuming calibration process, a robust approach was developed using the Response Surface Methodology (RSM) to optimize the calibration procedure. For this purpose, numerical models were designed using the Box-Behnken Design technique, and numerical simulations were performed under uniaxial and triaxial stress states. The model input parameters represented the models' micro-mechanical (lattice) properties and the macro-scale properties, including uniaxial compressive strength (UCS), elastic modulus, cohesion, and friction angle constitute the output parameters of the model. The results from RSM models indicate that the lattice UCS and lattice friction angle are the most influential parameters on the macro-scale UCS of the specimen. Moreover, lattice UCS and elastic modulus mainly control macro-scale cohesion. Lattice friction angle (flat joint fiction angle) and lattice elastic modulus affect the macro-scale friction angle. Model validation was performed using physical laboratory experiment results, ranging from weak to hard rock. The results indicated that the RSM model could be employed to calibrate LS-SRM numerical models without a trial-and-error process.
연구배경: 본 연구는 치면열구전색(치아홈메우기)에 대한 전반적인 인식을 살펴봄으로써 현재 정체되어 있는 치면열구전색의 활성화를 위한 방안을 제시하고자 수행되었다. 연구방법: 치면열구전색 보장성 정책의 변화에 따른 사회적 인식을 확인하고자 5개 차수로 시기를 분류하였다. 1차시기(2009.12.1.~2010.11.30.), 2차시기(2010.12.1.~2012.9.30.), 3차시기(2012.10.1.~2013.5.5.), 4차시기(2013.5.6.~2017.9.30.), 5차시기(2017.10.1.~2022.12.31.)로 각각 설정하였다. 비정형 빅데이터 분석방법인 텍스트마이닝 분석방법을 활용하였다. 텍스톰을 사용하여 키워드를 수집 및 분석하였으며, 상위 키워드 30개의 빈도수, 의미 연결망의 구조적 특징, 중심성 분석, QAP 상관분석 및 동시출현 단어분석을 실시하였다. 연구결과: 빈도분석 결과 시기별로 상위권에 속한 키워드는 '충치', '치료', '어린이' 등이 공통적으로 나타났다. 치면열구전색의 시기별 의미연결망 구조적 특징에서 밀도지수는 모든 시기별 약 1.00으로 확인되었다. QAP 상관분석결과 1차시기와 2차시기, 4차시기와 5차시기의 상관계수가 0.834로 가장 높은 상관을 보였다. 동시출현 단어분석결과 모든 시기에 걸쳐 '충치'와 '예방'이 1위로 나타났다. 결론: 본 연구를 통해 치면열구전색은 충치예방을 위한 술식과 예방치료로써 사회적 인식이 잘 형성되었음을 알 수 있었다. 그러나 보건교육에 대한 인식은 낮았다. 정체된 치면열구전색을 활성화하기 위해서는 효과적인 교육을 강화해 나가야 하는 노력이 필요하겠다.
The "pseudo-wedge" failure is a name for a complex instability occurring at the Sarcheshmeh open-pit mine (Iran). The pseudo-wedge failure contains both the rock bridge failure and sliding along pre-existing discontinuities. In this paper, a cross section of the failure area was first modeled using a bonded-particle method. The results indicated development of tensile cracks at the slope toe which explains the freedom of pseudo-wedge blocks to slide. Then, a three-dimensional discrete element method was used to perform a block analysis of the instability. The technique of shear strength reduction was used to calculate the factor of safety. Finally, the influence of geometrical characteristics of the mine wall on the pseudo-wedge failure was investigated. The safety factor significantly increases as the dip and dip direction of the wall decrease, and reaches an acceptable value with a 10-degree decrease of them.
In rock drilling, the most important characteristic to clarify is the wear of the drill bits. The reason that the rock drill bits fail with time is wear. In dry sliding contact adhesive wear deteriorates the materials in contact, quickly, and is the result of shear fracture in the momentary contact joins between the surfaces. This paper aims at presenting an overview of the assessment of WC/Co cemented carbide (CC) tricone bit in rotary drilling. To study wear of these bits, two approaches have been used in this research. Firstly, the new bits were weighted before they mounted on the drill rigs and also after completion their useful life to obtain bit weight loss percentage. The characteristics of the rock types drilled by using such this bit were measured, simultaneously. Alternatively, to measure contact wear, namely, matrix wear a micrometer has been used with a resolution of 0.02 mm at different direction on the tricone bits. Equivalent quartz content (EQC), net quartz content (QC), muscovite content (Mu), coarseness index (CI) of drill cuttings and compressive strength of rocks (UCS) were obtained along with thin sections to investigate mineralogical properties in detail. The correlation between effective parameters and bit wear were obtained as result of this study. It was observed that UCS shows no significant correlation with bit wear. By increasing CI and cutting size of rocks wear of bit increases.
한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
/
pp.52-59
/
2003
It is only possible through the image analysis of borehole wall and the core recovered from borehole constructed in rock mass that the real information about geologic characteristics in rock mass is directly obtained in primary research. Monitoring apparatus with multi-functional utility has implemented and applied in-situ condition for finding the geologic condition of target area. But, this apparatus is very expensive to be applied at the risk of loss during monitoring and cause hard work for moving them to the determined position. This paper shows the underground imaging from the borehole information obtained by a borehole camera with the simple utility and low cost enough to investigate the characteristics of borehole wall. Monitoring for this has been done in open-pit mine located at the northeastern part of Fukuoka Prefecture in Japan, and finally the three dimensional imaging of geological discontinuity was discussed relative to the field condition.
Due to the complex geological conditions, a large number of high quality coal seams was buried in the western of China which cannot be mining in open-pit methods. The dynamic properties of that coal cannot be studied easily in real site for the complex working condition. The compound coal blocks made on the basis of the real situation were studied in the laboratory. The physical and mechanical properties of the compound coal blocks and the raw coal were contrasted by using the UCS tests. The results show that the compound coal blocks made by mixing coal powder, cement and water in proportion of 2.5:2:1 are the closest to that of standard raw coal. Then the propagation of strain waves and crushing effects on the coal were studied in the compound coal blocks by using the super dynamic strain test system and the numerical calculated method of ANSYS/LS-DYNA. The results show that the diameter of the crushing zone in the compound coal blocks was similar to that in the numerical results. The fractures distribution in laboratory tests also has a similar trend to the calculation results. The measured strain waves at the distance of 50 cm, 100 cm, and 150 cm from the center of the charge are mainly concerned at -1.0×104 με and have a similar trend as that in the numerical simulation.
본 연구에서는 Value Engineering 기법을 토취장 선정의 도구로 활용할 수 있는지의 여부를 검토하였다. 이를 위해 대규모 택지개발지역의 토취장 후보지들에 대한 지반조사 결과를 분석한 후 토취장 후보지들의 가채량을 산정하였으며, 토취장 후보지들의 VE 평가에는 가중치 부여 매트릭스평가법을 적용하였다. VE 평가를 위해 평가항목을 결정한 후 중요도를 산정하고 평가척도를 설정하였으며, 토취장 후보지에 대한 성능등급 및 성능평가를 수행하여 토취장 후보지들의 개발 우선순위를 결정하였다. 결과적으로 토취장 후보지들에 대한 상대공사비는 운반거리와 밀접한 관련이 있으며, 운반거리가 멀어질수록 상대공사비는 점차 증가하므로 운반거리가 토취장 선정에 있어 상당한 영향을 미친다는 것을 확인하였다. 또한 최적의 토취장 후보지를 선정하는데 있어 토취장 자체의 조건도 중요하지만, 생애주기비용의 영향을 무시할 수 없는 것으로 나타났다.
한국암반공학회 2000년도 암반공학문제의 수치해석(Numerical Analysis in Rock Engineering Problems)
/
pp.183-193
/
2000
본 논문에서는 인도네이사 Kalirnantan섬에 위치하는 Pasir탄전의 노천채탄장을 대상으로 기존 지질자료의 분석 및 지질조사, 암반평가, 현지 및 실험실 시험을 통하여 관련 암석들에 대한 물성시험의 수행과 평사투영법과 수치해석에 의한 안정성해석 등을 근거로 채광장내의 전체사면 특히 Roto 북부 및 남북구역의 사면을 적절하게 설계할 수 있는 방안을 재시하고자 하였다. Roto 지역의 주요 불연속면들은 주로 층리로 구성되어 있으며, 층리의 경사는 북쪽의 약 $60^{\circ}$ 에서 남쪽 지역은 $80^{\circ}$ 전후로 남으로 가면서 경사가 급해지며, 많은 사면에서 평면파괴와 전도파괴가 일어나고 있따. Roto 전 지역의 암석물성 시험결과는 이암온 평균 일축압축강도가 9MPa 이고, 사암은 12MPa로 이암보다는 다소 강도가 높다. 현장조사에 의한 암질을 국제암반역학회 분류기준에 따라 분류하면 Roto 북부지역의 암석은 R2~R3 등급에 속할 정도로 대부분 연약하였으며, 석탄층의 강도는 R1~R2 등급에 해당된다. Roto 북부의 4개 지역(동부, 서부,남부 및 북부)과 Roto 남부의 2개 지역(동부 및 서부)의 사면에 대한 상세한 안정성 해석이 수행되었다. 본 연구에서는 최소 사면안전율을 1.2로 결정하여 평사투영법과 한계평형법의 해석을 통해 계산된 30~60$60^{\circ}$의 사면 경사각에 대하여 다시 유한차준법(FLAC)에 의한 안정성 분석을 실시하였다. 최종 사면각으로 Roto 북부지역의 동부사면은 $34^{\circ}$, 서부사면은 $33^{\circ}$, 북부사면은 $32^{\circ}$, 그리고 Roto 남부의 최종사면각은 동부 및 남부사면 모두 $36^{\circ}$로 제안하였다. 본 노천채탄장의 최종사면과 같이 장기적인 유지를 필요로 하는 사면은 사면의 변형거동을 감시하기 위해 보다 체계적인 계측을 필요로 하며, 또한 사면이 많은 비에 노출되기 쉽기 때문에 사면의 풍화와 침식에 대한 대책연구도 수행되어야 한다.
본 논문에서는 인도네시아 Kalimantan섬에 위치하는 Pasir 탄전의 노천채탄장을 대상으로 기존 지질자료의 분석 및 지질조사, 암반평가, 현지 및 실험실 시험을 통하여 관련 암석들에 대한 물성시험의 수행과 평사투영법과 수치해석에 의한 안정성해석 둥을 근거로 채광장내의 전체사면 특히 Roto 북부 및 남부구역의 사면을 적절하게 설계할 수 있는 방안을 제시하고자 하였다. Roto 지역의 주요 불연속면들은 주로 층리로 구성되어 있으며, 층리의 경사는 북쪽의 약 60$^{\circ}$에서 남쪽 지역은 80$^{\circ}$ 전후로 남으로 가면서 경사가 급해지며, 많은 사면에서 평면파괴와 전도파괴가 일어나고 있다. Roto 전 지역의 암석물성 시험결과는 이암은 평균 일축압축강도가 9MPa 이고, 사암은 12MPa 로 이암보다는 다소 강도가 높다. 현장조사에 의한 암질을 국제암반역학회 분류기준에 따라 분류하면 Roto 북부지역의 암석은 R2~R3 등급에 속할 정도로 대부분 연약하였으며, 석탄층의 강도는 R1~R2 등급에 해당된다. Roto 북부의 4개 지역 (동부, 서부, 남부 및 북부) 과 Roto 남부의 2개 지역(동부 및 서부)의 사면에 대한 상세한 안정성 해석이 수행되었다. 본 연구에서는 최소 사면안전율을 1.2로 결정하여 평사투영법과 한계평형법의 해석을 통해 계산된 30~36$^{\circ}$의 사면경사각에 대하여 다시 유한차분볍 (FLAC)에 의한 안정성 분석을 실시하였다. 최종 사면각으로 Roto 북부지역의 동부사면은 34$^{\circ}$, 서부사면은 33$^{\circ}$, 남부사면은 35$^{\circ}$, 북부사면은 32$^{\circ}$, 그리고 Roto 남부의 최종사면각은 동부 및 남부사면 모두 36$^{\circ}$로 제안하였다. 본 노천채탄장의 최종사면과 같이 장기적인 유지를 필요로 하는 사면은 사면의 변형거동을 감시하기 위해 보다 체계적인 계측을 필요로 하며, 또한 사면이 많은 비에 노출되기 쉽기 때문에 사면의 풍화와 침식에 대한 대책연구도 수행되어야 한다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.