• 한국음향학회지
• /
• 제3권1호
• /
• pp.25-35
• /
• 1984

This paper analysis the Dynamic Time Warping algorithms for time normalization of speech pattern and discusses the Dynamic Programming algorithm for spoken Korean isolated digits recognition. In the DP matching, feature vectors of the reference and test pattern are consisted of first three formant frequencies extracted by power spectrum density estimation algorithm of the ARMA model. The major differences in the various DTW algorithms include the global path constrains, the local continuity constraints on the path, and the distance weighting/normalization used to give the overall minimum distance. The performance criterias to evaluate these DP algorithms are memory requirement, speed of implementation, and recognition accuracy.

• 한국방재학회 논문집
• /
• 제11권3호
• /
• pp.83-89
• /
• 2011

계단실을 직접 가압했을 경우에 계단실과 부속실 사이의 차압 및 부속실과 세대 사이의 차압이 어떤 영향을 받는지 연구하기 위해 실건물을 사용해 실험했다. 또한 열린문에서의 유속분포도 측정하였다. 본 연구에 사용된 건물은 지상 20층 지하 2층의 공동주택이다. 계단실을 가압하기 위해서 송풍기를 지하 1층에 설치하여 외부공기를 계단실로 공급했다. 13가지 경우에 대한 실험을 실시했으면 주 실험변수들은 문이 개방된 층의 숫자와 위치 및 송풍량이었다. 지상 1층 문들만이 열린 상태에서는 계단실과 부속실 사이의 차압 및 부속실과 세대 사이의 차압이, 1층 부근을 제외하고는, 비교적 균일하게 분포되었다. 실험결과 180~270 CMM에서 한 층이 개방되어도 화재안전기준의 방연풍속을 만족하였고, 계단실은 전체적으로 양압을 유지할 수 있었으나 최소차압 조건(10 Pa)을 항상 만족시키지는 못하였다. 두 층의 문들이 개방된 경우, 유량을 증가함으로써 최소유속조건은 만족시킬 수 있었으나 가압지점 인근에서 과압이 발생하지 않는 상태에서 최소차압조건을 만족시키는 것은 비현실적임을 발견했다.

• 한국의류학회지
• /
• 제18권5호
• /
• pp.674-681
• /
• 1994

In this study, four kinds of vapor-permeable waterproofed fabrics were selected and their properties and the changes of properties were investigated after laundering, petroleum drycleaning or tetrachloroethylene drycleaning (each 1, 5, 10 times). The results were as follows: 1) In the water resistance, only Gore Tex satisfied its minimum property requirements, $1.0kg/cm^2$ It decreased after laddering and drycleaning. Hipora-1000, Hipora-2000, Aitac decreased slightly by petroleum drycleaning and Gore Tex decreased slightly by all three methods. 2) In the moisture vapor transmission, three except Hipora-2000 satisfied its minimum property requirement, $4000g/m^2{\cdot}24hr$.24hr. After laundering and drycleaning, it increased regardless of cleaning methods. 3) In the water repellency, Hipora-lOOG, Hipora-2000 were not almost decreased after laundering and drycleaning. Aitac decreased slightly by petrolem drycleaning and Gore Tex decreased slightly by laundering and petroleum drycleaning. 4) Air permeability of Aitac increased with increasing of cleaning times regardless of cleaning methods. 5) In the bond strength, only Gore Tex dissatisfied its minimum property requirements, 250g/cm. Regardless of cleaning method, bond strength decreased with increasing of cleaning times. 6) Color difference was large in case of Hipora-1000 by laundering, Hipora-2000 by laundering and tetrachloroethylene drycleaning Aitac by tetrachloroethylene drycleaning, Gore Tex by laundering. To diminish property change of vaper-permeable waterproofed fabric, petroleum drycleaning is more effective than laundering and tetrachloroethylene drycleaning.

• 정보처리학회논문지C
• /
• 제9C권5호
• /
• pp.679-686
• /
• 2002

비디오 서버에서 압축된 형태로 저장된 비디오 데이터를 화질의 저하 없이 클라이언트로 전송하기 위해서는 프레임당 대역폭을 일정하게 조절하는 방법이 필요하다. 이에 스무딩 기법은 프레임당 비트수가 다른 가변 비트율(VBR : Variable Bit Rate)을 가진 비디오 스트림을 일련의 고정된 전송률로 전송하는 방법이다. 본 논문에서는 비디오 서버에 저장된 비디오 스트림을 클라이언트측으로 전송할 경우 최소의 대역폭과 전송률 변화 횟수를 가지며 비디오 서버의 CPU 오버헤드를 최소화하는 스무딩 알고리즘을 제시한다. 제시된 알고리즘의 효용성을 증명하기 위해 기존의 다른 스무딩 알고리즘들과 다양한 환경에서 비친 분석하였다.

• 전력전자학회논문지
• /
• 제26권2호
• /
• pp.120-126
• /
• 2021

DC-link capacitors are one of the main components in two-level three-phase voltage source inverters (VSIs); they provide the pulsating input current and stabilize the vacillating DC-link voltage. Ideally, the larger the capacitance of DC-link capacitors, the better the DC-link voltage stabilizes. However, high capacitance increases the cost and decreases the power density of VSI systems. Therefore, the capacitance should be chosen carefully on the basis of the DC-link voltage ripple requirement. However, the DC-link voltage ripple is dependent on the pulse-width modulation (PWM) strategy. This study especially presents a DC-link voltage ripple analysis when the minimum loss discontinuous PWM strategy is applied. Furthermore, an equation for the selection of the minimum capacitance of DC-link capacitors is proposed. Experimental results with R-L loads are also provided to verify the effectiveness of the presented analysis.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2021년도 학술발표회
• /
• pp.145-145
• /
• 2021

Water distribution networks (WDNs) are designed to satisfy water requirement of an urban community. One of the central issues in human history is providing sufficient quality and quantity of water through WDNs. A WDN consists of a great number of pipelines with different ages, lengths, materials, and sizes in varying degrees of deterioration. The available annual budget for rehabilitation of these infrastructures only covers part of the network; thus it is important to manage the limited budget in the most cost-effective manner. In this study, a novel pipe replacement scheduling approach is proposed in order to smooth the annual investment time series based on a life cycle cost assessment. The proposed approach is applied to a real WDN currently operating in South Korea. The proposed scheduling plan considers both the annual budget limitation and the optimum investment on pipes' useful life. A non-dominated sorting genetic algorithm is used to solve a multi-objective optimization problem. Three decision-making objectives, including the minimum imposed LCC of the network, the minimum standard deviation of annual cost, and the minimum average age of the network, are considered to find optimal pipe replacement planning over long-term time period. The results indicate that the proposed scheduling structure provides efficient and cost-effective rehabilitation management of water network with consistent annual budget.

• 스마트미디어저널
• /
• 제12권9호
• /
• pp.72-80
• /
• 2023

본 논문에서는 다수의 환자가 발생하여 구급차를 통해 병원으로 이송하여야 하는 경우 최소비용 최대유량 알고리즘에 기반하여 병원을 배정 및 재배정하는 기법을 설계하고 성능을 평가한다. 환자의 증상과 병원들까지의 거리에 의해 플로우 그래프를 생성하는 과정, 링크 용량 수정 과정, 구급차와 병원 매칭 과정 등으로 구성되며 알고리즘 수행시간의 효율성으로 인해 추가환자의 발생이나 병원의 수용능력 변경에도 플로우 그래프 재구성에 의해 재배정을 수행할 수 있다. 프로토타입 구현에 의한 성능 평가 결과 주어진 실험 환경에 대해 제안된 기법은 순차 배정 방식에 비해 24%까지 이송요구시간 불만족을 감소시킬 수 있다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제20권6호
• /
• pp.939-943
• /
• 2007

Two experiments were conducted to determine the lysine requirement of straight-run broiler chickens ($Hubbard{\times}Hubbard$) during the period 4-21 (Exp. 1) and 21-40 (Exp. 2) days of age. Experiments were conducted during the summer months (June-August) in open-sided houses, thus exposing chicks to chronic heat stress. Daily min-max temperature averaged $28-40^{\circ}C$ (Exp. 1) and $28-36^{\circ}C$ (Exp. 2). Lysine deficient basal diets were formulated to contain low-nutrient-density, i.e., 2,700 kcal per kg ME, 18.6% CP (Exp. 1), and 2,750 kcal per kg ME, 17.1% CP (Exp. 2), to mimic typical commercial broiler diets used in Pakistan. Diets were supplemented with L-lysine HCl to provide total lysine level ranging from 0.85 to 1.10% (six increments) and 0.72 to 1.02% (six increments), respectively in Exp. 1 and 2. Live performance data were subjected to quadratic analysis and requirement was defined as the level achieving 95% of maximum or minimum values. Lysine requirements were found to be 0.98 and 0.97% total lysine, respectively, for gain and feed efficiency during 4-21 days, and 0.87% total lysine for both gain and feed efficiency during 21-40 days of age. Calculated on a digestible lysine basis, the estimates were 0.85 and 0.84%, respectively, for gain and feed efficiency during 4-21 days of age; and 0.75% for gain and feed efficiency during 21-40 days of age.

• 농업과학연구
• /
• 제11권1호
• /
• pp.160-175
• /
• 1984

로우터리 경운(耕耘)날의 회전속도(回轉速度) 및 작업속도(作業速度)가 경운소요(耕耘所要)토오크에 미치는 영향을 분석(分析)하기 위(爲)하여, 형상각(形狀角) ${\theta}=30^{\circ}$, $40^{\circ}$인 2종(種)의 경운(耕耘)날로 로우터리축(軸)을 204, 243, 285, 360rpm 4단계로, 전진속도(前進速度)는 29.40cm/s, 46.93cm/s로 변화(變化)시키면서 인공토양조(人工土壤槽)에서 dynamic strain gage system을 이용(利用)하여 경운소요(耕耘所要)토오크를 측정분석(測定分析)한 결과(結果)를 요약(要約)하면 다음과 같다. 1. 경운(耕耘)날의 회전속도(回轉速度) 및 전진속도(前進速度)는 경운소요(耕耘所要)토오크에 교호작용(交互作用)으로 영향(影響)을 미치는 것으로 분석(分析)되었으며, response surface analysis를 통(通)하여 분석(分析)한 수학적(數學的)인 모형(模型)은 다음과 같다. $$T=a_0+a_1V+a_2R+a_3VR+a_4VR^2$$ 여기서 T=경운소요(耕耘所要)토오크 (kg-m) $a_0$=당(當)수(數) $a_1,\;a_2,\;a_3,\;a_4$= 계(係)수(數) V=경운장치(耕耘裝置)의 전진속도(前進速度) (cm/s) R=경운(耕耘)날의 회전속도(回轉速度) (rpm) 2. 최대경운소요(最大耕耘所要)토오크는 로우터리날 회전속도(回轉速度)가 증가(增加)함에 따라 ${\frac{{\partial}T}{{\partial}V}}$는 증가(增加)하였으며, 200~220rpm에서 증가율(增加率)이 최저(最低)가 되었고, 같은 조건(條件)에서 ${\frac{{\partial}T}{{\partial}R}}$은 감소(減少)하는 경향(傾向)이었으며, 전진속도(前進速度)가 증가(增加)함에 따라 감소율(減少率)은 증가(增加)되었다. 3. 평균경운소요(平均耕耘所要)토오크는 회전속도(回轉速度)가 320~360rpm에서 ${\frac{{\partial}T}{{\partial}R}}$의 變化가 적었으며, ${\frac{{\partial}T}{{\partial}R}}$은 회전속도(回轉速度)가 증가(增加)함에 따라 감소율(減少率)이 증가(增加)되었다. 4. 전진속도(前進速度)에 대(對)한 토양(土壤)의 단위체적당(單位體積當) 평균경운소요(平均耕耘所要)토오크의 변화율(變化率)${\frac{{\partial}T}{{\partial}R}}$는 270~300rpm에서 최저(最低)가 되었으며, ${\frac{{\partial}T}{{\partial}R}}$은 V=29.40cm/s와 V=46.93cm/s일때 변화율(變化率)이 280~290rpm에서 교착(交錯)하였다. 5. 로우터리날의 형상각(形狀角)이 증가(增加)함에 따라 순경운소요동력(純耕耘所要動力)은 증가(增加)하였다. 그러나 실제(實際) 이용면(利用面)에서는 형상각(形狀角)이 작으면 로우터리날에 검불이 감기게 되므로 소요동력(所要動力)이 크게 증가(增加)함을 보여주는 연구결과도 있다. 그러므로 형상각(形狀角) 변화(變化)에 대(對)해서는 계속 연구(硏究)되어야 할 과제(課題)라 인정(認定)된다.

• Journal of Radiation Protection and Research
• /
• 제45권2호
• /
• pp.88-94
• /
• 2020

Background: The International Commission on Radiological Protection (ICRP) has recently published report series on the occupational intakes of radionuclides (OIR) for internal dosimetry of radiation workers. In this study, the optimized monitoring program including the monitoring interval and the minimum detectable activity (MDA) of major radionuclides was suggested to perform the routine individual monitoring of internal exposure based on the ICRP OIR. Materials and Methods: The derived recording levels and the critical monitoring quantities were reviewed from international standards or guidelines by the International Atomic Energy Agency (IAEA), the International Organization for Standardization (ISO), and the European Radiation Dosimetry Group (EURADOS). The OIR data viewer provided by ICRP was used to evaluate the monitoring intervals and the MDA, which are derived from the reference bioassay functions and the dose coefficients. Results and Discussion: The optimal monitoring intervals were determined taking account of two requirement conditions on the potential intake underestimation and the MDA values. The MDA requirement values of the selected radionuclides were calculated based on the committed effective dose from 0.1 mSv to 5 mSv. The optimized routine individual monitoring program was suggested including the optimal monitoring intervals and the MDA requirements. The optimal MDA values were evaluated based on the committed effective dose of 0.1 mSv. However, the MDA can be adjusted considering the practical operation of the routine individual monitoring program in the nuclear facilities. Conclusion: The monitoring intervals and the MDA as crucial factors for the routine monitoring were described to suggest the optimized routine individual monitoring program of the occupational intakes. Further study on the alpha/beta-emitting radionuclides as well as short lived gamma-emitting nuclides will be necessary in the future.