• Smart Structures and Systems
• /
• v.16 no.6
• /
• pp.1069-1089
• /
• 2015

Arch bridges consist of some important components for structural behavior such as arches, sidewalls, filling materials and foundations. But, arches are the most important part for this type of bridges. For this reason, investigation of arch is come into prominence. In this paper, it is aimed to investigate the arch thickness effect on the structural behavior of masonry arch bridges. For this purpose, Goderni historical arch bridge which was located in Kulp town, Diyarbakir, Turkey and the bridge restoration process has still continued is selected as an application. The construction year of the bridge is not fully known, but the date is estimated to be the second half of the 19th century. The bridge has two arches with the 0.52 cm and 0.69 cm arch thickness, respectively. Finite element model of the bridge is constructed with ANSYS software to reflect the current situation using relievo drawings. Then the arch thickness is changed by increasing and decreasing respectively and finite element models are reconstructed. The structural responses of the bridge are obtained for all arch thickness under dead load and live load. Maximum displacements, maximum-minimum principal stresses and maximum-minimum elastic strains are given with detail using contours diagrams and compared with each other to determine the arch thickness effect. At the end of the study, it is seen that the maximum displacements, tensile stresses and strains have a decreasing trend, but compressive stress and strain have an increasing trend by the increasing of arch thickness.

• Phonetics and Speech Sciences
• /
• v.4 no.2
• /
• pp.89-94
• /
• 2012

The aim of this study is to investigate the usefulness of the parameter CPP (cepstral peak prominence) and LTAS (long term average spectrum) band energy for an analysis of breathy voice with vocal fold paralysis. Thirty-four female subjects who have vocal paralysis after thyroidectomy participated in this study. According to the perceptual judgements by three speech pathologists and one phonetic scholar, subjects were divided into two groups: breathy voice group (n = 21) and non-breathy voice group (n = 13). Maximum sustained phonation task was measured for acoustic analysis. CPP-related (i.e. mean F0, mean CPP, and mean CPPs) and LTAS-related (i.e. minimum, maximum, and mean) parameters were used. Independent samples t-test was conducted. Regarding CPP, there are significant differences in mean CPP and mean CPPs between groups. The values of mean CPP and CPPs in the non-breathy voice group are higher than those in the breathy voice group. The CPP could be regarded as the useful parameter for breathy voice analysis in the clinic. When it comes to LTAS, energy from 0 to 2 kHz are significantly different between groups. The minimum value of non-breathy group is lower than that of breathy group, whereas the maximum value of non-breathy group is higher. The frequency band below 2 kHz seems to be related to breathy voice.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.405-408
• /
• 1998

Due to the large conduction band discontinuity between emitter base, OmGaAs HBT has an advantge to enable the hot electrons to inject into the base. In this paper, InAlGaAs/InGaAs HBT with the various emitter junction gradings and the modified collectors are simulated and analyzed by HMC(hybrid monte carlo) simulator in order to find a optimal structure for the shortest transit time. A minium base transit time (.tau.$_{b}$ ) of 0.21 ps was obtained for HBT with the grading layer, which is parabolically graded from x=1.0 to x=0.5. The minimum collector transit time (.tau.$_{c}$ ) of 0.31ps was found when the collector was modified by inserting p$^{[-10]}$ and p$^{+}$ layers. Thus HBT in combination with the emitter grading and the modified collector layer showed the cut-off frequency (f$_{T}$) of 183GHz.z.z.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.1
• /
• pp.88-96
• /
• 2006

Among the various methods for minimization of waste activated sludge, maintaining a low F/M ratio in the bioreactor is known to be the most effective reliable one. In this research, various experiments were performed to check the capability of the nonwoven fabric filter bioreactor, which has been proved able to maintain a low F/M ratio by maintaining a high MLSS concentration, for excess sludge minimization. The reactor was intermittently fed with a synthetic wastewater having a COD concentration of approximately 300 mg/L and no SS. Results of the experiments showed that the F/M ratio in the reactor decreased to a minimum value of 0.02 g COD/g MLSS-day as the MLSS concentration increased to a maximum value of 31,010 mg/L. However, the measured endogenous decay coefficients and oxygen uptake rates of the MLSS confirmed that the activity of the MLSS decreased as the MLSS concentration increased. Based on the increase of MLSS in the reactor and the mass balance during the whole experimental period, the average microorganism yield coefficients were computed to be low values of 0.148 and 0.139 g MLSS/g COD, respectively. These results indicate that the nonwoven fabric filter bioreactor employed in this research is effective for minimization of excess sludge production.

• Korean Journal of Ichthyology
• /
• v.31 no.4
• /
• pp.187-194
• /
• 2019

This study was conducted to know the genetic diversity and population structure of Japanese halfbeak (Hyporhamphus sajori) in the Northeast Asia, using mitochondrial DNA control region. In the present study, a total of 70 individuals were collected from three locations of China (Liaoning), Korea (Tongyeong) and Japan (Wakasa Bay), and 47 individuals sequences from three locations of Japan (Wakasa Bay, Toyama Bay and Mikawa Bay) were downloaded from genbank. A total of 7 haplotypes were identified with 7 polymorphic sites from 358 bp length sequences. Haplotype and nucleotide diversity were very low and ranged from 0 to 0.295±0.156 and 0 to 0.0009±0.0011, respectively. Ancestral haplotype was shared by 94% individuals. An extremely low haplotype and nucleotide diversity, and starlike minimum spanning tree indicated that the species have undergone a recent population expansion after bottleneck. Pairwise F_ST values were low and there was no significant differences among populations suggesting a gene flow among the populations. Dispersal of the eggs with the aid of drifting seaweed and currents might be the major responsible factor for the genetic homogeneity.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.4
• /
• pp.153-168
• /
• 2005

The purposes of this study were to determine the influence of midsole hardness and sole thickness of sports shoes on ball flex angle and position with increment of running velocity. The subjects employed for this study were 10 college students who did not have lower extremity injuries for the last one year and whose running pattern was rearfoot striker of normal foot. The shoes used in this study had 3 different midsole hardness of shore A 40, shore A 50, shore A 60 and 3 different sole thickness of 17cm, 19cm, 21cm. The subjects were asked to run at 3 different speed of 2.0m/sec, 3.5m/sec, 5.0m/sec and their motions were videotaped with 4 S-VHS video cameras and 2 high speed video cameras and simultaneously measured with a force platform. The following results were obtained after analysing and comparing the variables. Minimum angle of each ball flex position were increased with the increment of running velocity and shoe sole thickness(P<0.05), but mid-sole hardness did not affect minimum ball flex angle. The position which minimum angle was shown as smallest was 'D'. Midsole hardness and sole thickness did not affect time to each ball flex minimum angle, total angular displacement of ball flex angle, and total angular displacement of torsion angle(P<0.05). The position which minimum angle was appeared to be earliest was similar at walking velocity, and E and F of midfoot region at running velocity. Total angular displacement of ball flex position tended to increase as shifted to heel. It was found that running velocity had effects on ball flex angle variables, but shoe sole thickness partially affected. It would be considered that running velocity made differences between analysis variables at walking and running when designing shoes. Also, it was regarded that shoes would be developed at separated region, because ball flex angle and position was shown to be different at toe and heel region. It is necessary that midsole hardness and thickness required to functional shoes be analyzed in the further study.

• The Plant Pathology Journal
• /
• v.15 no.3
• /
• pp.152-157
• /
• 1999

An antibiotic compound was isolated from the culture of an antagonist against Fusarium oxysporum f. sp. sesami, Bacillus polymyxa strain KB-8, and tested for the control of Fusarium wilt of sesame in greenhouse conditions. Optimum conditions for culturing the antagonist to obtain the maximum antibiotic activity were determined using different culture media, initial medium acidity, and incubation periods for which yeast -malt extract agar with the initial acidity of pH 5 and over 13 days culture were best. Antibiotic substances extracted by methanol had 2 main fractions, KB-8A and KB-8B, in thin layer chromatography (OLC) with Rf values of 0.35 and 0.67 in a solvent system of chloroform : methanol = 7 : 3. The fraction KB-8A wa purified further by XAD-2, silica gel and Sephadex LH-20 column chromatography, and crystalization. Its minimum inhibitory concentrations (MICs) were $12.8\mu\textrm{g}$/ml for F. oxysporum and Alternaria mali, $6.4\mu\textrm{g}$/ml for Colletotrichum gloeosporioides and Rhizoctonia solani, and $3.2\mu\textrm{g}$/ml for Phytophthora capsici. Soil drenching of antibiotic KB-8A in the concentrations of $13.0\mu\textrm{g}$/ml and $26.0\mu\textrm{g}$/ml effectively inhibited the Fusarium wilt of sesame in a greenhouse test, which appeared to be comparable to the fungicide benlate of $6.5\mu\textrm{g}$ a. i./ml.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.2
• /
• pp.38-45
• /
• 1999

This study was to figure out proper Formaldehyde/Urea molar ratio of UF resin with satisfactory bonding strength of plywood and properties of particleboard. The six kinds of UF resins were manufactured with F/U molar ratio 1.0, 1.2, 1.4, 1.6, 1.8, and 2.0. The boards were made of three kinds of raw materials : Veneer, Sliver-Particle and Strand-Particle. Manufacturing condition of plywood : amount of mixing resin was 150g/$m^2$. The fourty secs/mm simple-pressing schedule in the pressure 10kgf/$m^2$ was applied for 480mm${\times}$700mm board at the temperature of $110^{\circ}C$ in a hot press. Manufacturing condition of particleboard : Target density was 0.65g/$cm^2$. The stepwise 9 minutes- multi-pressing schedule in the maximum pressure 40kgf/$cm^2$, the minimum pressure 15kgf/$cm^2$ was applied for $480mm{\times}634mm{\times}12mm$ board at the temperature of $150^{\circ}C$ in a hot press. The results are as follows : I. In bonding strength, plywood which was made by F/U molar ratio 1.2 showed the highest value. Other molar ratio resin also gave the satisfied value of KS standard, 7.5kgf/$cm^2$. 2. In internal bond strength of particleboard, Sliver-Particleboard(SLPB) and Strand-Particleboard(STPB) varied respectively from 5.9kgf/$cm^2$ to 4.8kgf/$cm^2$, from 6.7kgf/$cm^2$ to 5.4kgf/$cm^2$. SLPB with F/U=1.2 and STPB with F/U=1.6 had higher IB value. Also, both SLPB and STPB showed lower IB value in F/U molar ratio 2.0 and 1.0. 3. SLPB and STPB with six kinds of UF resin respectively satisfied bending strength of KS standard 150 Type(130kgf/$cm^2$) and 200 Type(180kgf/$cm^2$). Bending strength data for both of SLPB and STPB showed little or no loss from F/U=1.8 to F/U=1.2. Also, STPB was approximately two times higher than that of SLPB. Therefore, the raw material's shape had more effect on bending strength than the FlU molar ratio. 4. F/U=1.6 and 1.4 showed the lower thickness swelling in SLPB and STPB. All of STPBs satisfied thickness swelling of KS standard, under 12%.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.3
• /
• pp.327-332
• /
• 2016

The genetic relationships between different populations and breeds of exotic dairy goats in Thailand were studied using 12 microsatellite markers. Blood samples were obtained from 211 goats from Department of Livestock Development breeding and research farms: 29 Anglonubian (AN), 21 Alpine (AP), 23 Jamunapari (JAM), 50 Saanen (SN), and 88 Toggenburg (TG). Five of the 12 microsatellite markers were found to be polymorphic. A mean of 7.40 alleles per locus was found, with a range from 5 (SPS115 and ETH225) to 11 (TGLA122). We found 24, 27, 19, 32, and 24 alleles in the AN, AP, JAM, SN, and TG breeds, respectively; 37 alleles were present in all breeds. The mean number of alleles in each population ranged from 3.2 (ETH225 locus) to 7.6 (TGLA122 locus). Genetic variability within the breeds was moderate as evidenced by the mean expected heterozygosity of 0.539. The average observed heterozygosity across the 5 markers in all breeds was 0.529 with the maximum observed at the BM1818 locus (0.772) and the minimum at the ETH225 locus (0.248). The observed and expected heterozygosity for all breeds for the 5 microsatellite markers ranged from 0.419 to 0.772 and 0.227 to 0.792, respectively. On the basis of their means, the TGLA122 and BM1818 loci were the most suitable markers for distinguishing genetic diversity among the goats. The estimated average $F_{is}$ value for the breeds ranged from -0.044 (ETH225) to 0.180 (SPS115), while the estimated average $F_{st}$ value ranged from 0.021 (SPS115) to 0.104 (ETH10). These results indicated that TGLA122 and BM1818 markers are suitable to be used for aiding conservation and breeding improvement strategies of dairy.

• Journal of Korean Academy of Nursing
• /
• v.15 no.1
• /
• pp.52-58
• /
• 1985

This study was attempted to investigate the main factors affecting health perception of the patients following cardiac valve replacement surgery. Data were collected from Sept. 1 to Oct. 31, 1984 through administration of questionnaire developed for this study by the researcher. The subject was 95 patients who received follow up care following cardiac valve replacemert surgery at S.N.U.H. The data were analyzed by T-test, oneway ANOVA, pearson correlation and multiple regression according to dependent variables. The results were as follows. \circled1 Average self-health perception of those patients. were 4.62, (maximum; 7 minimum; 1) and they showed on affirmative response for their health condition, \circled2 There was significant difference in health perception according to sex difference. Men had higher health perception than women. (t=2,83, p=0.006) \circled3 There was significant difference in health perception according to occupation. Those who had occupation showed higher health perception those who had no occupation. (t=3.25, p=0.002) \circled4 The longer post-operative period elapsed, the higher health perception was, and there was significant difference in health perception (f=0.2958, p=0.002). \circled5 The higher age was, the lower health perception was, and there was a significant difference in health perception. (${\gamma}$= -0.2485, p=0.008) \circled6 The fewer subjective psychosomatic symptoms were, the higher health perception was, and there was a significant difference in health perception. (f = -0.4988, p=0.0000) \circled7 The more active daily activities were, the higher health perception was, and there was a significant difference in health perception. (${\gamma}$=0.6359 p=0.0000) \circled8 The main factors predicting health perception .are like these. \circled1 Daily activities (42.7%), highest variable. \circled2 Psychosomatic symptoms (7.29%) \circled3 Elapsed period after cardiac valve replacement surgery (1.89%) \circled4 Existence of occupation (1.87%) \circled5 Sex (1.78%) \circled6 Age (0.8%).