• Transactions of the Korean hydrogen and new energy society
• /
• v.18 no.3
• /
• pp.256-264
• /
• 2007

In order to calculate the relation between the hydrogen and the hydrogen absorption metals in the atomic level, Embedded Atom Method(EAM) is recommended. In this study, we had constructed the EAM programs from constitutive formulas and parameters of the hydrogen and palladium for the purpose of predicting the expansion behavior on hydrogen absorbing in the geometric shape of hydrogen absorption metals, as palladium bars and plates. And the EAM analyses data were compared with the experiment data by using electrochemical method. As results, it is note that the expansion rate in thickness of the palladium plate model by EAM analyses is about 4 times larger than width and length, be similar to experiment results. Also, in the microscopic and macroscopic level the expansion behavior through EAM analyses show good agreement with experiment data.

• Journal of computational fluids engineering
• /
• v.11 no.2 s.33
• /
• pp.19-24
• /
• 2006

A research to evaluate the efficiency of design optimization was carried out for aerodynamic design optimization problem in distributed computing environment. The aerodynamic analyses which take most of computational work during design optimization were divided into several jobs and allocated to associated PC clients through network. This is not a parallel process based on domain decomposition in a single analysis rather than a simultaneous distributed-analyses using network-distributed computers. GBOM(gradient-based optimization method), SAO(Sequential Approximate Optimization) and RSM(Response Surface Method) were implemented to perform design optimization of transonic airfoils and evaluate their efficiencies. dimensional minimization followed by direction search involved in the GBOM was found an obstacle against improving efficiency of the design process in the present distributed computing system. The SAO was found fairly suitable for the distributed computing environment even it has a handicap of local search. The RSM is apparently the most efficient algorithm in the present distributed computing environment, but additional trial and error works needed to enhance the reliability of the approximation model deteriorate its efficiency from the practical point of view.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.5
• /
• pp.447-454
• /
• 2015

Design and application of hardware-in-the-loop simulation (HILS) for design of CNC-controlled machine tool feed drives is discussed. The CNC machine tool is a complex mechatronics system where the complexity results from the software-based controller composed of a variety of functionalities and advanced control algorithms. Therefore, using a real CNC controller in the control simulation has merits considering the efforts and accuracy of the simulation modeling. In this paper challenges in HILS for a CNC controlled feed drive, such as minimization of time delay and transmission error that are caused by discretization of the feed drive model, is elaborated. Using an experimental HILS setup of a machine tool feed drive applications in controller gain selection and CNC diagnostics are presented.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11b
• /
• pp.194-199
• /
• 2005

Body-on-frame type vehicle has a set of frame bushes which are installed between body and frame fur vibration Isolation. Such frame bushes are important vibration transmission paths to passenger space. In order to reduce the vibration level of passenger space, therefore, the change of complex stiffness of the frame bushes is more efficient than modification of other parts of the vehicle such as body, frame and suspension. The purpose of this study is to reduce the vibration level for ride comfort by optimization of complex stiffness of frame bushes. In order to do this end, simple finite element vehicle model was constructed and the complex stiffness of frame bushes was set to be design variable. Objective function was defined to reflect passenger ride comfort and genetic algorithm and sub-structure synthesis were applied for minimization of the objective function.

• Journal of Institute of Control, Robotics and Systems
• /
• v.1 no.2
• /
• pp.112-118
• /
• 1995

In designing assembly lines, it is required that the lines should not only meet the demand of the product, but also minimize the assembly cost associated with the line. For such a purpose, numerous research efforts have been made on either the assembly sequence generation or the assembly line balancing. However, the works dealing with both the research problems have been seldom reported in literature. When assembly sequences are generated without consideration of line balancing, additional cost may be incurred, because the sequences may not guarantee the minimum number of workstations. Therefore, it is essential to consider line balancing in the generation of cost-effective assembly sequences. To incorporate the two research problems into one, this paper treats a single-model and deterministic (SMD) assembly line balancing (ALB) problem, and proposes a new method for generating line-balanced robotic assembly sequences by using a simulated annealing. In this method, an energy function is derived in consideration of the satisfaction of assembly constraints, and the minimization of both the assembly cost and the idle time. Then, the energy function is iteratively minimized and occasionally perturbed by the simulated annealing. When no further change in energy occurs, an assembly sequence with consideration of line balancing is finally found. To show the effectiveness of the proposed scheme, a case study for an electrical relay is presented.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.9
• /
• pp.142-151
• /
• 1995

The trend of compact size, light weight, low power consumption in the portable telecommunication equipments demands large scale integration and low voltage operation of chips and the minimization of the number of the components in the telecommunication terminal. According to the trend, existing chip components are modulized and are integrated as a part into a bigger chip. This paper is about the development of the peripheral units of micro-controller for mobile telecommunication terminal. Peripherals consist of DMA controller, Interrupt controller, timer, watchdog timer, clock generator, and power management unit. They are designed to be integrated with EU(Execution Unit) and BIU(Bus Interface Unit) into a 16 bit micro-controller which will be used as a core of an ASIC for next generation digital mobile telecommunication terminal. At first, whole block of the micro-controller was described by VHDL behavioral model and simulated to verify its overall operation. Then, watchdog timer, clock generator and power management unit were directly synthesized by using VHDL synthesis tool. Rest of the pheriperal units were designed and simulated by using Compass Design Tool.

• Proceedings of the Korean System Dynamics Society
• /
• 2000.07a
• /
• pp.65-102
• /
• 2000

In 1987, The Brundtland Report defined a sustainable development as the development that meets the needs of the present without compromising the ability of future generations to meet their own needs. This is the concept that we should cling to, to preserve natural resources of the present for the future generation. With this concept in mind, this paper criticized that the current waste management policy has been neglecting resource preservation aspect of waste management policy while giving too much emphasis on reducing waste generation. Thus, the purpose of this paper is to analyze how waste management policy can affect preservation of natural resources, and to investigate policy alternatives that can reduce both the volume of waste generated and the amount of natural resources that need to be consumed in the production process. The study was conducted based on the literature survey and system dynamics simulation. Borrowing Randers and Meadows's solid waste model with some modification of parameter and variables, this paper simulate several policy alternatives to figure out the most effective waste management policy set that can meet the need of the present without compromising the ability of the future generation to meet their own needs. Main concern was how to link waste management policy with resource management policy that can lead to minimization of waste generation and resource consumption.

• Journal of Korean Society of Transportation
• /
• v.20 no.5
• /
• pp.153-161
• /
• 2002

다사용자계층 통행배정(Multiple User Class Assignment) 문제란 교통망을 이용하는 통행자들이 이질적인 통행계층으로 구성된 경우, 이들 각 계층의 통행수요를 교통망에 배정하는 문제를 의미한다. 이는 기존 통행 배정모형들이 모든 통행자의 통행특성이 동질적이라고 가정함으로서 발생하는 불합리한 통행배정 결과를 완화시키기 위한 방법이다. 또한, 최근 지능형교통체계(Intelligent Transportation Systems, ITS)사업에서 교통정보제공시스템이 구현될 예정임에 따라, 교통정보를 제공받는 계층과 그렇지 못한 계층간의 영향을 분석하거나 혼잡통행료부과 등과 같은 교통관리전략을 정확히 평가하기 위해서 다사용자계층 통행배정모형에 대한 관심이 증가하고 있다. 그러나, 다사용자계층 통행배정모형의 경우, 사용자간의 상호영향으로 통행비용함수의 1차 편미분행렬(Jacobian matrix)이 비대칭(Asymmetric)이 되어 동등 수리최소화문제(Equivalency mathematical Minimization program)로 구성할 수 없고 또한 수치적으로 풀기가 어렵다는 문제가 있다. 본 연구는 이런 문제점을 극복할 수 있는 모형식과 알고리듬을 제시코자 한다. 본 연구에서 제시된 모형은 2가지 특징이 있다. 먼저, 각 사용자 계층간의 상호영향을 모형내에 반영하며, 기종점쌍간의 통행시간변화에 따른 수요변화를 고려한다는 점이다. 이를 위하여 변동부등모형(Variational Inequality Model. VI)으로 문제를 구성하며, 이에 대한 해석 알고리듬도 제시한다. 또한, 변동부등모형으로 구축된 다사용자계층 모형이 다사용자계층 균형조건과 동일함을 보여주는 동등성조건(Equivalency condition)도 제시한다.

• The Journal of Korean Association of Computer Education
• /
• v.8 no.6
• /
• pp.123-132
• /
• 2005

There are many research results for the location update cost minimization of location management in cellular networks. For minimizing the location update cost, we have to take in consideration of each users' mobility pattern. This paper suggests location area list generation and a 3-step paging method based on users' movement history with the users' profiles. Users' mobility has not only geographical regular patterns but also time-related regularity. So, the method extracts users' movement regularities in both geography and time from their movement history, and generate location area list considering the regularities. For the performance analysis of the suggested method, we have executed a simulation for suggested method with user's mobility model. The results of the simulation show that suggested algorithm has some merits in the location management cost.

• Advances in Automotive Engineering
• /
• v.1 no.1
• /
• pp.105-121
• /
• 2018

The hybrid electric powertrain is a robust solution that allows for major improvements in both fuel economy and emission reduction. In the present study, a through-the-road hybrid vehicle model with an electric motor driving the rear axle and an Internal Combustion Engine (ICE) driving the front axle has been constructed. We then present a systematic method for the determination of a real time applicable optimal Energy Management Strategy (EMS) for a hybrid road vehicle. More precisely, we compare the performance of rule-based EMS strategies to an optimization-based strategy, namely ECMS (Equivalent Consumption Minimization Strategy). The comparison is conducted in parallel with a parameterization of the size of the internal combustion engine and the implementation of a Continuously Variable Transmission (CVT) that allows following the line of best fuel economy. For the FTP-75 driving cycle, the constrained engine On-off control algorithm is shown to offer a 28% improvement potential of fuel consumption compared to the conventional internal combustion engine while the ECMS strategy achieves an improved potential of nearly 33%.