• Geomechanics and Engineering
• /
• v.19 no.5
• /
• pp.393-405
• /
• 2019

This paper evaluates the geotechnical and geo-engineering properties of the South Pars Zone (SPZ) marls in Assalouyeh, Iran. These marly beds mostly belong to the Aghajari and Mishan formations which entail the gray, cream, black, green, dark red and pink types. Marls can be observed as rock (soft rock) or soil. Marlstone outcrops show a relatively rapid change to soils in the presence of weathering. To geotechnically characterise the marls, field and laboratory experiments such as particle-size distribution, hydrometer, Atterberg limits, uniaxial compression, laboratory direct-shear, durability and carbonate content tests have been performed on soil and rock samples to investigate the physico-mechanical properties and behaviour of the SPZ marls in order to establish empirical relations between the geo-engineering features of the marls. Based on the experiments conducted on marly soils, the USCS classes of the marls is CL to CH which has a LL ranging from 32 to 57% and PL ranging from 18 to 27%. Mineralogical analyses of the samples revealed that the major clay minerals of the marls belong to the smectite or illite groups with low to moderate swelling activities. The geomechanical investigations revealed that the SPZ marls are classified as argillaceous lime, calcareous marl and marlstone (based on the carbonate content) which show variations in the geomechanical properties (i.e., with a cohesion ranging from 97 to 320 kPa and a friction angle ranging from 16 to 35 degrees). The results of the durability tests revealed that the degradation potential showed a wide variation from none to fully disintegrated. According to the results of the experiments, the studied marls have been classified as calcareous marl, marlstone and argillaceous lime due to the variations in the carbonate and clay contents. The results have shown that an increase in the carbonate content leads to a decrease in the degradation potential and an increase in the density and strength parameters such as durability and compressive strength. A comparison of the empirical relationships obtained from the regression analyses with similar studies revealed that the results obtained herein are reasonably reliable.

• Korean Journal of Mineralogy and Petrology
• /
• v.33 no.1
• /
• pp.73-86
• /
• 2020

The materials generating from volcanic eruption are volcanic gases, lavas and pyroclastic materials. Volcanic ash which has small-grain size (< 2 mm in diameter) can be moved easily and disperse widely, thus it may affect to communities across hundreds of square kilometers. The impacts from volcanic ash fall on people, structures, equipments, plants and livestock largely depend on ash thickness. According to increasing ash thickness, the intensity and area of damage may increase and affect significant damages not to human health but also to infrastructures. To reduce the impacts from volcanic ash fall, we have to establish the guidances about the nature and extent of the hazard and prepare the actions to increase abilities of communities to manage hazard. Although we don't have any experience caused by volcanic ash fall during and after volcanic eruption, we need to prepare the impacts of volcanic ash fall for future eruption in the areas surrounding Korea.

• The Journal of the Petrological Society of Korea
• /
• v.2 no.2
• /
• pp.139-155
• /
• 1993

We have shown that the volcanic rocks from the northern part of Cheju Island can be divided into high $P_2O_5/K_2O$(HPK) and low $P_3O_5/K_2O$(LPK) groups, each with distinct geochemical characteristics(Park and Kwon, 1993a and b). This study reports mineral compositions for plagioc-lase, olivine, and clinopyroxene in order to see the dependence of mineral chemistry on the whole rock composition, and discusses equilibrium relationships between crystal and liquid. Plagioclase and olivine phenocrysts show no compositional differences for the two rock group. However, $Al^{ⅵ}/Al^{ⅳ}$ ratios of clinopyroxenes suggest that pyroxenes have fractionated at deeper level, and that the LPK group might have fractionated at higher pressure than the HPK group. These are in good agreement with our previous interpretation based on whole rock chemistry(Park and Kwon, 1993a). Although subhedral or euhedral form and homogenous composition for most plagioclase and clinopy-roxene phenocrysts suggest equilibrium relationship with liquid, the uncertainties associated with liquid, the uncertainites associated with equilibrium constant for these minerals do not allow testing equilibium relationship between mineral and liquid on the basis of chemistry. On the other hand, olivine phenocrysts in hawaiites, for which Kd is well known, show distinct nonequilibrium relationship with calculated liquid composi-tions, while those in other rock compositions are in equilibrium from those for other rocks. We report for the first time as far as we know plagioclase xenocryst and pigeonite inclusion in plagioclase, which indicates assimilation process. In conclusion, these mineralogical observations imply that mag-matic processes underneath the Cheju volcano were not simple.

• The Journal of the Petrological Society of Korea
• /
• v.2 no.2
• /
• pp.63-73
• /
• 1993

The assemblage epidote and grandite garnet occurs in low-to medium-grade metabasites and calc schists of various geotectonic settings and in hydrothermally altered calcareous rocks in skarn deposits. The compositions of sixteen epidote-garnet paris have been analysed by means of electron microprobe. Al-Fe partitioning between coexisting grandite garnet and epidote is considered and measured at the grain boundaries on the supposition that the surface equilibrium was maintained in the following exchange reaction: 2$Ca_2Al_3Si_3O_12$(OH)+$Ca_3Fe_2Si_3O_12$=2$Ca_2A_l2FeSi_3O_12$(OH)+$Ca_3Al_2Si_3O_12$ Partition coefficients confirms the differences in thermal conditions between low-grade and medium-grade metamorphic rocks. $K_D$ values ($X_{$CO_2$}$=($Fe^{+3}$/Al)$^{Ep}$/($Fe^{+3}$/Al)$^{Gr}$, where Fe=$Fe^{+3}$) from greenschist facies rocks of the estimated metamorphic temperatures, 330~$390^{\circ}C$, range approximately between 0.02 and 0.17. Epidote-amphibolite facies rocks and calcareous skarns of the estimated temperatures, 400~$550^{\circ}C$, have $K_D$ values between 0.24 and 0.37. $K_D$ values from the rocks of the temperatures, 640~$700^{\circ}C$, range nearly between 0.58 and 0.75. The diagrams in Figs. 2 and 3 can serve as a mineralogic thermometer for relatively shallow rocks, assuming that the pressure dependence of partition coefficients for the iron-exchange reaction in the two minerals can be neglected.

• Economic and Environmental Geology
• /
• v.20 no.1
• /
• pp.1-18
• /
• 1987

The Cheolam silver deposits are emplaced along the fractures in breccia dike and the Hongjesa granite. Breccia dike contains fragments of late Cretaceous acidic volcanic rocks and other fragments of various rocks distributed in the mine area. Therefore it is presumed that the mineralization was taken place in later than late Cretaceous time. Mineral paragenesis is complicated by multiple episodes of fracturing. Six distinct depositional stages can be recognized: stage I, deposition of base metal sulfides; stage II, deposition of base metal sulfides and silver minerals; stage III, deposition of carbonates; stage IV, deposition of silver minerals and base metal sulfides; stage V, deposition of silver minerals; stage VI, deposition of barren quartz. Silver minerals from the deposits are native silver, acanthite, pyrargyrite, argentian tetrahedrite, stephanite, polybasite, pearceite, allargentum, antimonial silver and electrum. Fluid inclusion studies ware carried out for stage I, II, IV and VI quartz and stage III calcite. Homogenization temperatures for each stage are as follows: stage I, from $225^{\circ}$ to $360^{\circ}C$; stage II, from $145^{\circ}$ to $220^{\circ}C$; stage III, from $175^{\circ}$ to $240^{\circ}C$; stage IV, from $130^{\circ}$ to $185^{\circ}C$; stage VI, from $120^{\circ}$ to $145^{\circ}C$. Salinities of ore fluids were in the range of 4 and 10 wt.% equivalent NaCl over stage I and stage VI. Ore mineralogical data of each stage indicate that temperatures are within the range of homogenization temperature of fluid inclusions and sulfur fugacities declined steadily from $10^{-9.7}atm$. to $10^{-18.7}atm$. through stage I into stage V.

• Economic and Environmental Geology
• /
• v.28 no.4
• /
• pp.327-335
• /
• 1995

Illite/smectite (I/S) in the Beaufort-Mackenzie Basin, Arctic Canada has been scrutinized on the basis of mineralogical analysis of 215 core and drill-cutting samples from 22 exploratory wells onshore and offshore. I/S in the Beaufort-Mackenzie Basin includes the following four types: random, a mixture of random and ordered, R1-ordered, and R>1-ordered I/S. A mixture of random and ordered I/S occurs in the transitional interval between random and R>1-ordered I/S, and may represent a metastable state in the ordering reaction. A widespread occurrence of the mixture in natural environments suggests that the ordering reaction may be a slow process that results in co-existence of reactants and products. K-saturation experiments show that layer charges of expandable layers in I/S are variable. High-charge expandable layers transform into illite-like layers upon simple K-saturation. K-saturation alters the composition and/or the degree of ordering in I/S, suggesting that illitization in nature can be transformational.

• The Journal of Engineering Geology
• /
• v.14 no.4 s.41
• /
• pp.381-390
• /
• 2004

This study was performed to relate the weathering properties of Oyaish tuff from Japan to mechanical properties of rocks in terms of mineralogical alteration and chemistry. The tuff is composed of clinoptilolite, quartz, feldspars, mordenite, opal C-T, and smectite. Since fresh tuff contains approximately $30\~50\%$ zeolite, it is expected that the rock is subjected to weathering process ascribed to water contents on earth surface, significantly reducing mechanical strength of tuff. It is also anticipated that weathering process and properties may be different even in the same rock mass, due to the differences in local mineralogy, chemistry and microtextures in tuff.

• The Journal of Engineering Geology
• /
• v.17 no.2 s.52
• /
• pp.235-251
• /
• 2007

Baeknokdam rock mass at the crest of Halla mountain is composed of Baeknokdam trachybasalt in the eastern region and Hallasan trachyte in the western region. On-going weathering, rockfall and collapse of Baeknokdam wall rock are closely linked to the weathering of trachyte distributed in the western region of Baeknokdam, though within the restricted area of eastern region trachybasalt blocks has been naturally formed and may be rolled down neering properties have been conducted. Based on the results of these experiments variations of mineralogical-petrographical characteristics of trachyte together with chemical and physical properties with respect to the degree of weathering have been analyzed. Weathering mechanism of Baeknokdam trachyte has been delineated by investigating the environmental cause of weathering and the peculiar features of weathered rock mass.

• 한국해양학회지
• /
• v.24 no.2
• /
• pp.69-78
• /
• 1989

Cultivated pearls, composed of aragonite crystals, show two distinctive layers: nacreous and conchiolin organic layers. Each aragonite crystal is surrounded by organic matrix, which probably consists of amino acids. Nucleus, surrounded by pearl layer, also consists of nacreous crystals, suggesting that there is a close mineralogical and ultrasturctural relationship between pearl and nucleus. Carbon isotopic values of cultivated pearls are within the range of marine carbonate carbon. Oxygen isotopic composition indicates that the temperature for the growth of pearl and pearl oyster ranges from 16.4 to $21.4^{\circ}C$ and from 15.5 to $24.8^{\circ}C$, corresponding to the summer temperature range of the cultivating area. Elemental composition of pearl, pearl oyster, and nucleus shows that there is a difference in chemical composition depending upon the original mineralogy and the chemical composition of water in which shells grow. Especially, a strong relationship exists between pearl and the inner layer of pearl oyster because both are composed of nacreous aragonite and formed in a shallow marine environment.

• Korean Journal of Soil Science and Fertilizer
• /
• v.36 no.6
• /
• pp.357-366
• /
• 2003

This study was conducted to develop n convenient and efficient granular type absorbent with high CEC from powdery zeolite, which is a waste produced while crushing the natural zeolite of Korea to get a particular particle size. The change of mineralogical characteristics during hydrothermal alternation of natural zeolite to Na-P zeolite in alkaline solution at various reaction times was determined by X-ray diffraction (XRD), scanning electron microscopy (SEM), and total elemental analysis. The columnar aggregate of Na-P Zeolite was produced by calcinating the natural zeolite-charcoal extrudates of about 3 mm diameter. In 24 hours reaction, clinoptillonite, mordenite and feldspar in natural zeolite were disappeared by 3 N NaOH treatment, while Na-P Zeolite with spherical granular structure was newly detected by XRD. As increasing reaction time, Si/Al ratio in remaining solution was deceased. The CEC of the synthesized material increased more than 2 times compared with that of natural zeolite, although the diameter of Na-P zeolite were rather increased.