• 공업화학
• /
• 제9권5호
• /
• pp.654-660
• /
• 1998

수열합성법을 이용한 PSZT제조시 출발물질의 첨가량과 광화제가 입자의 결정성과 입자크기 분포 및 소결체의 유전율에 미치는 영향을 조사하였다. Pb와 Sr의 비 및 Zr과 Ti의 비를 변화시킨 0.5 M의 혼합용액에 광화제로 KOH를 2~20 wt % 첨가한 후 $120{\sim}200^{\circ}C$에서 2시간 동안 수열반응을 통해 $0.3{\sim}15{\mu}m$의 평균입자 크기를 갖는 입방체모양의 PSZT분말을 제조하였다. 또한 제조된 분말을 $1150^{\circ}C$에서 2시간 동안 소결반응하여 1000~3000의 유전율을 갖는 소결체를 제조하였다. 실험결과 광화제의 농도는 10 wt %, Sr/(Sr+Ti)은 0.05, Zr/(Zr+Ti)은 0.52일 때 PSZT분말의 평균입자크기가 $0.5{\mu}m$로 작았으며, 이를 소결한 소결체의 유전율도 2900으로 높았다. 한편, 광화제의 농도를 증가시켜 입자의 평균입경을 작고 균일하게 제어할 수 있었으나 광화제를 과도하게 첨가하면 응집이 유발되어 입경이 커졌다. 입자의 결정성에 영향을 미치지 않을 정도로 Sr을 소량 첨가하여 소결체의 유전율을 증가시킬 수 있었다. 또한, Zr을 첨가함으로써 주요 결정상을 정방정에서 능면정으로 전이시킬 수 있었다.

• 시멘트
• /
• 통권51호
• /
• pp.20-30
• /
• 1973

1) electron-microprobe를 응용하여 $CaO-SiO_2-Al_2O_3$ 계에서 생성한 $C_2S$, $C_3S$ 에 존재하는 sulfate의 solid, solution을 정량적으로 구할 수 있었으며 이 결과로 $C_2S$ 에 $Al_2O_3$, $SO_3$ 등이 solid soln 등으로 침적되고 이들이 $C_3S$의 생성을 억제한다는 mechanism이 확인되었다. 2) phase equilibrium(상평형)에 의하면 $Na_2SO_4$, $K_2SO_4$는 mineralizer로서 작용하며 $C_3S$ 의 생성을 돕는다. 그러나 $K_2SO_4$ 와 $Al_2SO_3$ 가 결합상태로 존재할 경우는 1,400 $^{\circ}C$에서 광범위한 liquid를 생성하며 quenching하면 glass질과 $\beta-C_2S$ 만이 얻어지고 $C_3S$ 는 생성되지 않는다. 또 이를 1,250 $^{\circ}C$ 까지 서냉하면 $C_2S$ 와 Ca, K, Al, S, 등을 함유한 새로운 물질이 생성된다. 3) $CaO-SiO_2-Al_2O_3-Fe_2O_3$ 계에서 $C_3S$ 의 생성에 미치는 $Na_2SO_4$, $K_2SO_4$ 의 영향을 실험실적으로 검토한 결과 complex interaction이 확인되었으며 $Na_2SO_4$ 는 어떤 경우에는 mineralizing effect를 상실한다는 재미 있는 사실이 발견되었다.

• 한국재료학회지
• /
• 제23권6호
• /
• pp.344-352
• /
• 2013

First, a purified sludge was calcined at various temperatures viz. 800, 900, 1000, 1100 and $1200^{\circ}C$ per hour. Subsequently 100 wt% of ware from Geryong mountain was mixed with 5~25 wt% of a purified sludge. Then the ware was treated at $1250^{\circ}C$ in an electric kiln to test a bending strength. The physicochemical property of the prepared ware was characterized by XRD, Raman and SEM analysis. Among the different percentage, 25 wt% of a ware in a purified sludge calcined at $1000^{\circ}C$ showed 689 $kg/cm^2$ strength. Also the purified sludge calcined at $1000^{\circ}C$ was adequate physical properties than the other composites. Further to enhance the physical strength, 3 wt% $TiO_2$ (a mineralizer) was added into the ware and the strength was increased up to 731 $kg/cm^2$. The composites exhibit absorption and porosity rates of 0.17% and 0.39% respectively.

• 한국표면공학회지
• /
• 제49권5호
• /
• pp.472-476
• /
• 2016

The nano-array of the vertically aligned rod-like particles grown on ZnO coated glass-substrates was obtained via hydrothermal process. ZnO thin film coatings were prepared on the glass substrates using a MOD (metallorganic deposition) dip-coating method with zinc chloride dihydrate as starting material and 2-ethylhexanol as solvent. ZnO nanorods were synthesized on the seeded substrates by hydrothermal method at $80^{\circ}C$ using zinc-nitrate hexahydrate as a Zn source and sodium hydroxide as a mineralizer. Under the hydrothermal condition, the rod-like nanocrystals were easily attaching on the already ZnO seeded (coated) glass surface. It has been shown that the hydrothermal synthesis parameters are key factors in the nucleation and growth of ZnO crystallites. By controlling of hydrothermal parameters, the ZnO particulate morphology could be easily tailored. Rod-shaped ZnO arrays on the glass substrates consisted of elongated crystals having 6-fold symmetry were predominantly developed at high Zn precursor concentration in the pH range 7~11.

• 한국결정학회지
• /
• 제7권2호
• /
• pp.183-190
• /
• 1996

수열법을 이용하여 은(Ag)이 내장된 고온고압용 autoclave에서 KOH를 광화제로 하여 ZnO 단결정을 성장하고, LiOH 및 NH4OH의 첨가에 따른 결정외형의 변화에 대해 고찰하였다. 성장된 단결정은 연한 녹색을 띠고 있었으며 최대크기는 30×30×20mm3였다. KOH 광화제에 1.0-2.0M의 LiOH를 첨가하면 (0001)면의 flaw의 수가 감소하였다. 또한 NH4OH를 첨가한 결과 Vc/Va(c 축의 방향의 성장속도/a축 방향의 성장속도)가 증가함을 확인하였고, 이 방법을 응용하여 판상형의 종자결정 대신 침상형의 종자결정으로도 등방주상(Equant hexagonal prism)형의 ZnO 단결정을 성장할 수 있었다.

• 한국결정성장학회지
• /
• 제26권2호
• /
• pp.58-61
• /
• 2016

Basic 암모노써멀 방법을 사용하여 벌크 GaN 단결정을 성장시켰다. 종자 결정은 Hydride vapor phase epitaxy법으로 성장한 c면의 GaN 템플릿을 사용하고 광화제는 sodium metal, amide, azide를 사용하였다. 결정 성장 온도는 $500{\sim}600^{\circ}C$, 성장 압력은 2~3 kabr에서 실시하였다. c 축의 결정 성장 속도는 운용 압력이 증가함에 따라 선형적으로 증가하였다. Cathodoluminescence로 측정한 평균 전위 밀도는 $1{\times}10^5/cm^2$였다. Double Crystals X-ray Diffraction로 측정한 (002)면의 반치폭은 Ga 면에 대해서는 약 270 arcsec, N 면에 대해서는 약 80 arcsec이었다.

• 한국세라믹학회지
• /
• 제18권1호
• /
• pp.13-22
• /
• 1981

This study is to investigate the effective mineralizer in the manufacture of forsterite porcelain as a high frequency insulator. A mixture of $Mg(OH)_2$. and $SiO_2$.($\alpha$-Quartz) corresponding to the molar ratio of 2.0 MgO: 1.0 $SiO_2$ was prepared from the materials of high purity. It was heated to 140$0^{\circ}C$ at the rate of 20$0^{\circ}C$/hr, which was kept constantly for 1 hour, and one has made chamotte after cooling. Six kinds of glasses were prepared by an 0.1 atomic equivalent of K ions substitution-Ba, Bi, Zn, Cd, Zr-to the basic K-glass (0.333 $K_2O$.1.14 $SiO_2$) and were melted approximately at 150$0^{\circ}C$. The forsterite bodies were provided by adding each glass (10, 15, 20, 25, 30%) to the forsterite chamotte, which was fired at 1320, 1360, 1400, 144$0^{\circ}C$. (1 hr). One has examined the physical and dielectric properties for the specimens. The results of the experiments are as follows; 1. As for water absorption: Bodies were better vitrified with an addition and temperature change of Ba, Bi, Zn-glasses. The specimen containing Cd-glass showed deviation of slow decreasing, where as K-glass was completely not vitrified. 2. Bodies containing Ba, Zn, Bi-glasses appeared comparatively high Modulus of Rupture at 136$0^{\circ}C$, while containing Zr-glass had the highest Modulus of Rupture as the addition changes remarkably at 140$0^{\circ}C$. 3. It was estimated that 20-25% glass present in a forsterite bodies were in good conditions as for physical properties. 4. Specimens of Ba, Bi, Zr-glasses were superior as for dielectric properties, where among Ba-glass was most excellent. 5. Dielectric constant commonly increases in a slight gradient as firing temperature rises. 6. The petrographic examination showed that the bodies containing Ba, Bi-glasses had fine crystals, and were observed distinctly large mosaic crystals in the Zn-glass.

• 한국세라믹학회지
• /
• 제46권4호
• /
• pp.405-412
• /
• 2009

In high temperature ceramic glazes, a stable range of pink-red colors that produced $Cr_2O_3-SnO_2-CaO-SiO_2$ pigments were factored by Cassiterite($SnO_2$) and Malayaite($CaSnSiO_5$) by $Cr_2O_3$. The experiment examined the influence of $CrCl_3$, a Sn-Cr substitution added with a mineralizer ($H_3BO_3$), as a chromophore in pigments. The experiment also studied the effect of $H_3BO_3$ (2 wt%) when added to malayaite($CaSnSiO_5$) to see if the crystalline reaction will increase. $Cr_2O_3$ was also substituted with $CrCl_3$ in order to prove how much influence $CrCl_3$ had on the $H_3BO_3$. Malayaite and cassiterite were the basic compound materials and the experiment was conducted both with and without mineralizers (2 wt% of $H_3BO_3$). Each compound was synthesized at 800, 1000, 1200, 1300, 1400, $1500^{\circ}C$ for 2 h. Synthesized pigments were analyzed by XRD, FT-IR and UV-Vis. The temperature variation produced two crystal phases that showed the different engaging effects of Cr oxidation. $CrCl_3$ produced a better effect on the malayaite crystal phase, resulting in a more defined pigmentation of the pink-red coloration compared to $Cr_2O_3$.

• 한국세라믹학회지
• /
• 제46권6호
• /
• pp.615-620
• /
• 2009

The present research was performed to determine the optimal firing condition and holding time for malayaite crystal, which is responsible for the stable pink-red coloration in glaze at high temperatures, using Cr$Cl_3$ as chromophore for the synthesis of $Cr_2O_3-SnO_2-CaO-SiO_2$ system pigments. The malayaite crystal was influenced by the raw materials used for synthesis, firing temperature, and holding time. Thus there are differences in the crystal phase and in the coloration according to the condition of synthesis. When Cr$Cl_3$ was used as chromophore, the pigment could be synthesized at lower temperatures, because Cr$Cl_3$ melts at $1500{^{\circ}C}$, which is much lower than the temperature at which $Cr_2O_3$ melts (higher than $2435{^{\circ}C}$). And the employed Cr ion showed a change in oxidation state. When a mineralizer was used to improve the employment of malayaite and the Cr ion, and the low temperature was maintained at which the malayaite crystal is produced, the production of malayaite crystal was promoted and the employment of chromophore was also promoted in the oxidation state of Cr (IV). The results of the experiment showed that the optimal firing condition was 18 h of holding time at $800{^{\circ}C}$, using Cr$Cl_3$ as chromophore, followed by 2 h at the raised temperature of $1150{^{\circ}C}$. The change in coloration of the Cr (IV) employed by malayaite showed a very rich color of red. Thus it was possible to effectively synthesize sphene-pink pigments with more red tint at a low temperature.

• 한국세라믹학회지
• /
• 제44권6호
• /
• pp.325-330
• /
• 2007

High porous AlO(OH) gel is used in precursor of ceramic material, coating material and porous catalyst. For use of these, not only physiochemical control for particle morphology, pore characteristic and peptization but also studies of synthetic method for preparation of high porous AlO(OH) gel were required. In this study, high porous AlO(OH) gel was prepared through the aging and filtration process of aluminum hydroxides gel precipitated by the hydrolysis reaction of $Na_2CO_3$ solution and $Al_2(SO_4)_3$ and $Na_2SO_4$ mixed solution. In this process, optimum synthetic condition of AlO(OH) gel having excellent pore volume as studying the effect of hydrolysis pH on gel precipitates has been studied. Hydrolysis pH brought about numerous changes on crystal morphology, surface area, pore volume and pore size. Physiochemical properties of gel were investigated as using XRD, TEM, TG/DTA, FT-IR and $N_2$ BET method.