• 제목/요약/키워드: mineral source

Search Result 696, Processing Time 0.024 seconds

Clay minerals and geochemistry of continental shelf sediment around Jeju Island in the northern East China Sea (제주도 주변해역 대륙붕 퇴적물의 지화학적 조성과 점토광물 연구)

  • Youn, Jeung-Su
    • The Korean Journal of Quaternary Research
    • /
    • v.23 no.1
    • /
    • pp.25-37
    • /
    • 2009
  • Geochemical composition and clay minerals of surface and core sediments around off the Jeju Island were analyzed for identification of sediment origins. The clay mineral distribution is mainly controlled by the sediment source and the dominant circulation pattern. Smectite is highly concentrated (>8%) in the northwest near the South Yellow Sea and in the outer-shelf mud patch. It seems to be due to the high supply of smectite transported from China where fine-grained sediments are discharged from modern and ancient Huanghe River. The relatively high abundance of kaolinite are found in northeastern nearshore area and the southwest near Changjiang estuary. It seems to be supplied from Changjiang River and the southwestern Korea rivers. The sediment accumulation rates measured by $^{210}Pb$ geochronrom mowere 0.20 to 0.54cm/mr or 0.15 to $0.42g/cm^2{\cdot}mr^{-1}$ AOJI, with decreasing rates from the west part to the east part, resulting in the supply of fine-grained suspended sediments from the Changjiang and Huanghe Rivers system. The discrimination diagrams clearly show that the sediments around Jeju Island in the northern East China Sea are ultimately sourced from Chinese rivers, especially from the Huanghe River, whereas the sediment in the northeast part might come from Korean rivers and the Jeju Island.

  • PDF

Material Characteristics and Archaeological Scientific Implication of the Bronze Age Potteries from the Cheonan-Asan Area, Korea (천안-아산 지역 청동기시대 무문토기의 재료학적 특성과 고고과학적 의미)

  • Lee, Chan Hee;Cho, Seon Yeong;Eo, Eon Il;Kim, Ran Hee
    • Journal of Conservation Science
    • /
    • v.31 no.1
    • /
    • pp.47-64
    • /
    • 2015
  • The excavated potteries and raw clays of the Bronze Age from the archaeological sites in the Cheonan-Asan area were studied on material scientific characteristics and homogeneity. Under the microscope, grainsize of the tempers in the potteries were distributed from less than 1mm to 10mm. Microtexture of the potteries showed various shapes and sizes of pores. In addition to the main minerals such as quartz, feldspar, mica, hornblende, chlorite and talc were found from the X-ray diffraction analysis of potteries, while talc was not found in the raw clay. Therefore, it was considered as an artificially added mineral. Firing temperature of the potteries, which did not contain chlorite, are assumed that they were baked below $850^{\circ}C$. On the other hand, the potteries which had mica and talc, are assumed that they were fired below $900^{\circ}C$. The geochemical characteristics of the potteries and raw clays showed very similar patterns, that means the potteries were produced by using the raw clay sources from each site.

Lead-Zinc-Tin-Silver Mineralization of Tangguanpu Mine, Hunan Province, China: Fluid Inclusion and Sulfur Isotope Studies (중국 호남성 당관포 광산의 연-아연-주석-은 광화작용: 유체포유물 및 황동위원소 연구)

  • 허철호;윤성택;소칠섭
    • Economic and Environmental Geology
    • /
    • v.34 no.2
    • /
    • pp.157-166
    • /
    • 2001
  • Numerous base-metal bearing hydrothermal quartz vein deposits occur in the Hunan province of southern China. The Tangguanpu lead-zinc-tin-silver mine is the major producer among these deposits. Lead-zinc-tin-silver mineralization occurs in a single stage of massive quartz veins which filled fractures in fault zones within Paleozoic metasedimentary rocks. Sphalerite, chalcopyrite, galena, pyrite, arsenopyrite and pyrrhotite are the principal sulphide minerals in the Tangguanpu lead-zinc ores with minor amounts of tin- and antimony-bearing sulphides (stannite, teallite, boulangerite and tetrahedrite). Based on the iron and zinc partitioning between coexisting stannite and sphalerite, the formation temperature for this mineral assemblage range from 300$^{\circ}$ to 330$^{\circ}$C, which relatively agree with the upper part of homogenization temperature of fluid inclusion in quartz (20T-358$^{\circ}$C). Fluid inclusion data show that main lead-zine-tin-silver mineralization occurred from $H_{2}O$-NaCl fluids with relatively low salinities (11.2-7.3 wl.% eg. NaCI) at temperatures between 207$^{\circ}$ and 358$^{\circ}$C. The relationship between homogenization temperature and salinity suggests a history of cooling and dilution followed by initial boiling. Evidence of initial fluid boiling may indicate the fluid trapping pressures of 180 bars. The ${\delta}^{34}S{{\Sigma}S}$ values of -5.0 to 1.1 %, indicate an igneous source of sulfur in the Tangguanpu lead-zinc-tin-silver hydrothermal fluids.

  • PDF

Simulation for the Estimation of Design Parameters in an Aquifer Thermal Energy Storage (ATES) Utilization System Model (대수층 축열 에너지(ATES) 활용 시스템 모델의 설계인자 추정을 위한 시뮬레이션)

  • Shim Byoung-Ohan
    • Journal of Soil and Groundwater Environment
    • /
    • v.10 no.4
    • /
    • pp.54-61
    • /
    • 2005
  • An aquifer thermal energy storage (ATES) system can be very cost-effective and renewable energy sources, depending on site-specific parameters and load characteristics. In order to develop the ATES system which has certain hydrogeological characteristics, understanding the thermohydraulic process of an aquifer is necessary for a proper design of an aquifer heat storage system under given conditions. The thermohydraulic transfer for heat storage was simulated according to two sets of simple pumping and waste water reinjection scenarios of groundwater heat pump system operation in a two-layered aquifer model. In the first set of the scenarios, the movement of the thermal front and groundwater level was simulated by changing the locations of injection and pumping wells in a seasonal cycle. However, in the second set the simulation was performed in the state of fixing the locations of pumping and injection wells. After 365 days simulation period, the shape of temperature distribution was highly dependent on the injected water temperature and the distance from the injection well. A small temperature change appeared on the surface compared to other simulated temperature distributions of 30 and 50 m depths. The porosity and groundwater flow characteristics of each layer sensitively affected the heat transfer. The groundwater levels and temperature changes in injection and pumping wells were monitored and the thermal interference between the wells was analyzed to test the effectiveness of the heat pump operation method applied.

A Study on the Utilization of Soy-Lecithin in Broiler Ration (Broiler에 있어서 대두 Lecithin의 사료적 가치에 관한 연구)

  • 김대진;김영길
    • Korean Journal of Poultry Science
    • /
    • v.7 no.1
    • /
    • pp.23-29
    • /
    • 1980
  • The research was conducted to study the feeding value of crude soylecithin produced as by-products of soybean oil manufacturing in broiler ration. The results obtained were as follows. 1. The chemical composition, mineral composition, Vitamine contents and gross energy values of crude soy-lecithin were determined 2. No significant difference was observed for the body weight gain of broiler between control and lecithin groups of 3%, 6%, 9o/e and 12% addition. 3. Significant difference (P<0.05) was observed for feed intake lecithin 12% composed with lecithin 6% and 9% group, However, no significant difference was found among control, lecithin 3%, 6%, and 9% groups. 4. No significant difference was found for feed conversion between treatments. However, the lowest figure 2.32 for lecithin 9% treatments, followed by 2.40 of lecithin 6% and 2.41 of lecithin 3% orderly. 5. The composition of moisture, crude protein and ether extract in broiler carcas ranged from 71.2 to 72.15%, from 15.93 to 16.45% and from 6.19 to 7.05% respectively. 6. The weight of abdominal fat and live fat in broiler caress ranged from 42.4 to 63.7 gm, and from 2.2 to 2.4gm respectively. difference between abdominal and live fat weight was showing in significant statistically. 7. The present data reveal that soy-lecithin as by-product of soybean oil manufacturing was valuable energy source.

  • PDF

Han River Pollution Studies (한강의 오염도)

  • Choe, Sang
    • 한국해양학회지
    • /
    • v.7 no.1
    • /
    • pp.24-45
    • /
    • 1972
  • The Han River is an important water source in Seoul and neighbouring districts, for public and industrial supply, and for agriculture and fishery. Nowadays, more than six million inhabitants are supplied withe water from this river. The total length of the river is 470km, and has 17 10$\^$9/㎥ an average annual flow. The hydrographic characteristics at Seoul are 653㎥/sec in an average flow, 4,608㎥/sec in the maximum average flow, and 201㎥/sec in the minimum average flow. These are influenced in some degree by snowmelt in early spring, and greatly by the flood during summer. For the pollution problems, the periods of low flow are critical ones. As a rule they occur around the months November through June. Nowadays, most of the sewage from towns and industries is discharged untreated. Apart from domestic and industrial sewages, there are some discharges of mineral matter by mines in the upriver region. In general, water quality of the Han River is kept very clean and healthy until Kwangnaru of the upper region of Seoul. A large pollution, however, is received in the downstream by the domestic and industrial sewages of Seoul. It can be seen that dissolved oxygen, COD and BOD$\sub$5/ diminish markedly, and the intensity of almost every water parameter of the river continues to increase. Comparison of the figures for 1971 derived from a sampling point 40km downstream of Kwangnaru leads to the conclusion that hardness, Ca and Mg were no changed; alkalinity, Si and soluble- Fe were slightly increased; CO$\sub$2/, acidity, Cl, NO$\sub$2/-N, Cu, Zn and Al were increased in 2 and 3 times; total residue, total ignitious residue, COD, BOD$\sub$5/, NH$\sub$4/-N, PO$\sub$4/-P, Mn, Pb and total-Fe were increased in 4 to 7 times; and SO$\sub$4/, particulate-Fe and Cd were increased in 10 to 11 times. On the other hand, coliforms were increased in 650 times; fecal coliforms in 365 times; enterococci and total plate counts in 30 times, respectively. In view points of water quality standards, the down Han River water is now leveling out in Cd, coliforms and fecal coliforms for the agricultural use; in dissolved oxygen and some trace elements (Cu, Zn, Pb and Cd) for the fishery use; in ammonia, COD, BOD$\sub$5/, and Cd for the drinking use.

  • PDF

Comparison of Physicochemical Properties and Antioxidative Activities of Sunflower Sprout According to Germination Day (발아일수에 따른 해바라기 싹의 이화학적 특성 및 항산화성 비교)

  • Roh, Kyung-Rea;Ko, Seong-Hee;Kim, Chul-Jai
    • Journal of the Korean Society of Food Culture
    • /
    • v.27 no.1
    • /
    • pp.66-74
    • /
    • 2012
  • It is well known that sunflower (SF) sprout has more beneficial effects than SF seed due to increased levels of phytochemical components such as vitamins, total phenolics, and isoflavones during germination. This study investigated the physicochemical properties and antioxidative activities of SF seed during both germination and cultivation. In a proximate analysis, the water content of SF groat was 9.17% and then increased to 15.32% on the 11th day after seeding. On a dry weight basis, crude fat content decreased while the contents of carbohydrates, crude protein, and crude ash increased. As cultivation proceeded, the contents of minerals were in decreasing order of K, Mg, Ca, Na, Zn, Fe, Mn, and Cu, in which SF sprout cultivated for 9 or 11 days contained the highest mineral contents. Though vitamin C was not detected on SF groat, the content of vitamin C continuously increased up to the 5th day of cultivation and then decreased gradually. Vitamin E content in SF groat was higher than that in SF sprout. It was also found that the vitamin E content in SF sprout was the highest on the 5th day of cultivation. Daidzin was not detected in SF groat, but its concentration reached a maximum on the 5th day of cultivation in SF sprouts. Furthermore, higher amounts of daidzein were observed on the 3rd, 5th, and 9th days of cultivation. The highest total isoflavone content was observed on either the 3rd or 5th day of cultivation. The highest content of total phenolics was observed on the 5th of cultivation. When DPPH radical and peroxyl radical scavenging activities of SF sprout were measured in order to measure antioxidant efficacy, it was found that 5 day-cultivated SF sprout had the highest scavenging activities. In conclusion, SF sprout cultivated for 9 or 11 days was found to be a good source of minerals. Furthermore, the fifth-day after seeding was the optimal time for the production of SF sprout with effective natural antioxidant activity and high amounts of functional components such as vitamins, total phenolics, and isoflavones.

Nutritional Components and Antioxidant Activities of Commercial Loquat (Eryobotrya japonica) Leaf Tea (시판 비파나무잎차의 영양성분 및 항산화 활성)

  • Jeong, Chang-Ho;Kim, Il-Hun;Shim, Ki-Hwan;Bae, Young-Il
    • Journal of agriculture & life science
    • /
    • v.45 no.4
    • /
    • pp.105-112
    • /
    • 2011
  • Nutritional components and antioxidant activities of commercial loquat leaf tea (CLLT) were evaluated. Proximate compositions were as follows; moisture 5.34%, crude protein 8.38%, crude fat 13.26%, nitrogen free extract 46.21%, crude fiber 19.24% and crude ash 7.57%, respectively. Ascorbic acid and total phenolics content of CLLT was 0.47 mg/100 g and 42.55 mg/GAE g, respectively. Mineral elements were Ca 1,624.01 mg/100 g, K 1,099.66 mg/100 g, and Mg 192.70 mg/100 g, respectively. Amino acid contents of CLLT were very rich in glutamic acid 565.98 mg/100 g and deficient in cystine 12.97 mg/100 g. The 2,2'-azino-bis (3-ethylbenzthiazoline-6- sulfonic acid) diammonium salt (ABTS), 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activities of hot water extract from CLLT were 72.51% and 90.11%, respectively at a concentration of $1,000{\mu}g/mL$. Reducing power and ferric reducing antioxidant power (FRAP) of hot water extract from CLLT were increased in a dose dependent manner. Therefore, these results suggest that the hot water extract of CLLT possess antioxidant activities and thus it has great potential as a source for functional food such as natural antioxidant.

Current Status of Hyperspectral Remote Sensing: Principle, Data Processing Techniques, and Applications (초분광 원격탐사의 특성, 처리기법 및 활용 현용)

  • Kim Sun-Hwa;Ma Jung-Rim;Kook Min-Jung;Lee Kyu-Sung
    • Korean Journal of Remote Sensing
    • /
    • v.21 no.4
    • /
    • pp.341-369
    • /
    • 2005
  • Hyperspectral images have emerged as a new and promising remote sensing data that can overcome the limitations of existing optical image data. This study was designed to provide a comprehensive review on definition, data processing methods, and applications of hyperspectral data. Various types of airborne, spaceborne, and field hyperspectral image sensors were surveyed from the available literatures and internet search. To understand the current status of hyperspectral remote sensing technology and research development, we collected several hundreds research papers from international journals (IEEE Transactions on Geoscience and Remote Sensing, International Journal of Remote Sensing, Remote Sensing of Environment and AVIRIS Workshop Proceedings), and categorized them by sensor types, data processing techniques, and applications. Although several hyperspectral sensors have been developing, AVIRIS has been a primary data source that the most hyperspectral remote sensing researches were relied on. Since hyperspectral data have very large data volume with many spectral bands, several data processing techniques that are particularly oriented to hyperspectral data have been developed. Although atmospheric correction, spectral mixture analysis, and spectral feature extraction are among those processing techniques, they are still in experimental stage and need further refinement until the fully operational adaptation. Geology and mineral exploration were major application in early stage of hyperspectral sensing because of the distinct spectral features of rock and minerals that could be easily observed with hyperspectral data. The applications of hyperspectral sensing have been expanding to vegetation, water resources, and military areas where the multispectral sensing was not very effective to extract necessary information.

Evaluation of N2O Emissions by Nutrient Source in Soybean and Pepper Fields (콩과 고추재배지에서 양분 공급원별 N2O 배출량 평가)

  • Kim, Gun-Yeob;Lee, Sun-Il;Lee, Jong-Sik;Jeong, Hyun-Cheol;Choi, Eun-Jung
    • Korean Journal of Environmental Biology
    • /
    • v.36 no.4
    • /
    • pp.680-686
    • /
    • 2018
  • Nitrogen fertilizers, hairy vetch, and slow-release complex fertilizers were applied to the soil during the cultivation of crops. The impact of these factors on $N_2O$ emission was quantitatively assessed and the GHGs reduction effect comprehensively evaluated. Among the three factors, the significant factors affecting $N_2O$ emission were mineral nitrogen>soil moisture>temperature. Yield and fertilizer utilization efficiency were highest in the slow-release complex fertilizer treatment. There was no significant difference in $N_2O$ emissions between the slow-release complex fertilizer treatments and the NPK+hairy vetch treatments. Comprehensive results showed that slow-release complex fertilizers treatment has high yield and fertilizer utilization efficiency but low $N_2O$ emission.