• Journal of Ginseng Research
• /
• v.33 no.1
• /
• pp.13-25
• /
• 2009

Geochemical relationships between ginsengs and soils from three representative soil types, shale, phyllite and granite regions, from Keumsan were examined. High elements ere shown at the granite and shale areas of the weathered soils, the phyllite areas of he cultivated soils and the shale areas of the host rocks. T1 was enriched in ginsengs grown in the shale areas, Cs and B in the phyllite areas, and Be and Cd in the granite areas. Positive correlations were dominated by the shale areas. These relationships can be explained for mineral characteristics within the soils, and their behaviors related to the physio-chemical conditions. High elements were shown in the 2 year ginsengs of the hale areas, and 4 year ginsengs of the phyllite and granite areas in comparisons with ginsengs of the different ages from the same areas. These differences can be explained with ages of the ginsengs, solubilities of the minerals and physio-chemical differences within soils. The content differences of high elements such as Cs, T1 and Be were found between soils and ginsengs. Overall, these results suggest that components of ginsengs grown in the granite areas are chemically similar to the soils.

• Journal of Bio-Environment Control
• /
• v.16 no.4
• /
• pp.379-387
• /
• 2007

This research was conducted to evaluate the influence of pre-planting fertilizer levels (PFL) and initiation time of fertigation (ITF) on growth and nutrient contents of tomato plug seedlings. The pre-planting fertilizer levels in a coir+peatmoss+perlite (4:4:2, v/v/v) substrate were adjusted to 0.5X, 1.0X and 1.0X, and initiation time of fertigation was set to 7, 14,21 and 28 days after sowing. Elevated PFL in same ITF increased plant growth such as fresh and dry weights at 35 and 70 days after sowing. Plugs with early feeding among treatments of equal amount of PFL also showed better growth as compared to those of later feeding. In each ITF, 0.5X treatment had the higher tissue $P_2O_5$ contents than 1.0X and 1.5X treatments. Elevated PFL resulted in the decrease of tissue K, Mg and Fe contents and increase of tissue Ca contents. The pH in soil solution of all root substrates except 0.5X treatment at 35 and 70 days after sowing were greater than 7.0, which is too high. This suggests that the amounts and kinds of Ca containing fertilizers should be altered to decrease the pH. The results of this research indicated that fertilizer levels should be increased to 1.5X except Ca fertilizer, and fertigation immediately after moving plug trays from germination room to greenhouse is required to increase crop growth and decrease cropping time.

• Asian Journal of Turfgrass Science
• /
• v.23 no.1
• /
• pp.61-76
• /
• 2009

The purpose of this study are to investigate the reasonable maintenance expense of golf course according to the size and management system of each golf course. The maintenance cost per hole per golfer of 29 golf courses and the maintenance cost for items and locations of 8 golf courses were analyzed. 1. As golfers per hole increased, maintenance cost per hole per golfer decreased. 2. The decisive cost factors for maintenance cost of golf course are the number of annual golfers, the total course size, the management system, and automation of course facilities. 3. Maintenance cost of golf courses contained the landscaping areas except for building and parking lots is $869^{\}/_{m^2}$ Korean won. 4. Average maintenance cost of 8 golf courses is $44,325,000^{\}/_{hole}$. 5. Labor cost marked the largest portion in the total cost. Among the items of labor cost, repair cost for green ball mark was the highest with the ratio of 26%(\4,163,000). 6. Material cost for Fairways which reaches 30% of the total area was composed of $22%{\sim}44%$ of the total cost of materials. Cost of imported fertilizers, pestcides for insects and diseases, and sands for top dressing was the highest. 7. Material cost for Green which reaches 2% of the total area was composed of $28%{\sim}36%$ of the total cost. Cost of imported products such as particle-shaped fertilizers, micro mineral fertilizers, and soil conditioners was the highest. 8. There is no difference in cost between chemical fertilizers and the environmentally friendly fertilizers even if environmentally friendly fertilizers using microorganism or chitosan materials are also expensive.

• Geophysics and Geophysical Exploration
• /
• v.19 no.1
• /
• pp.37-44
• /
• 2016

$CO_2$-EOR (Carbon Dioxide-Enhanced Oil Recovery), one of the enhanced oil recovery methods, helps to not only enhance the production of oil, but also store carbon dioxide in underground. However, if micro fractures occur when during the injection of $CO_2$, it is difficult to make permanent storage of $CO_2$ in reservoir and can cause contamination of groundwater and soil. Therefore, in this study, we performed microseismic monitoring to investigate the occurrence of fractures during the $CO_2$ injection at the Meruap oil reservoir, Indonesia. To pick the first arrivals of microseismic events, Improved MER (Modified Energy Ratio) method was used. After picking the first arrivals, hodogram analysis was carried out by using the data recorded at three component geophones to calculate the back azimuth of events. Finally, locations of microseismic events were decided by using the results of first arrival picking and hodogram analysis. Estimated locations showed that all microseismic events were occurred at surface and any fracture did not occur around the reservoir. Moreover, by analyzing noise characteristic, we confirmed that almost of picked first arrivals were due to the repetitive mechanical noise.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.356-356
• /
• 2017

A field experiment was performed to evaluate the effects of tillage systems and fertilizer management on yield and nutrient uptake in Soybean. The plant height, fresh weight and dry weight of conventional tillage were much higher those observed for no-tillage. Significant differences in plant height were observed under tillage practices combined with fertilizer treatment. However, the greatest plant height (128.47 cm) was observed in conventional tillage with chemical fertilizer, and the lowest (45.4 cm) was observed in the no-tillage with green manure treatment. The highest fresh weight (172.4 g) and dry weight (44.1 g) were observed from the no-tillage chemical treatment in the late flowering stage of soybean. The plant concentration of nitrate was higher (2.29%) in no-tillage with green manure than it was with chemical fertilization. However, nitrogen increased steadily in all treatments, and the highest quantity of total nitrogen (476.7 Kg/ha) was observed in no-tillage with green manure. The N content in the soil decreased gradually just after the vegetative stage. Tillage practices and additional fertilizer application had an adverse effect on the uptake of N, P and K in soybean seeds. The nitrogen concentration in seeds was found to be increased in the no-tillage with green manure treatment. The uptake of more nitrogen induced a better yield. Thus, the no-tillage with green manure treatment had the greatest yield, although no significant difference was observed among foliar-applications and additional fertilization. Additionally, the phosphorus and potassium concentrations in seeds remained the same between the conventional tillage and no-tillage treatments. The results obtained in this study indicate that no-tillage strategies with fertilizers may influence the growth characteristics and mineral uptake in soybean.

• Asian-Australasian Journal of Animal Sciences
• /
• v.6 no.1
• /
• pp.107-113
• /
• 1993

This study determined the concentrations of micro-minerals in pastures, in feed supplements and in grazing, reproducing ewes, at different times during the year, at three farms in Northern China. Samples were collected 5 to 8 times during the year and analysed for selenium, copper, iron, molybdenum and zinc. On two farms selenium concentrations in both pastures and animal tissues were low for part of the year. The lowest concentrations in pasture (< $30{\mu}g/kg$ DM) and liver (< $100{\mu}g/kg$ wet weight) indicated that productivity of the sheep may be reduced by a deficiency of this element. On one farm copper concentrations in the lever were in the liver were in the deficient range (< $5{\mu}g/kg$ wet weight) for part of the year. It is likely that this is a result of high intakes of iron from pasture (up to 4.5 g Fe/kg DM) and soil, as indicated by high concentrations of iron in faeces (up to 7 g Fe/kg DM). Molybdenum intake is unlikely to have had much influence on copper absorption because pasture concentrations of this element were not unusually high (1 to 5 mg/kg DM). Zinc in pastures on two farms was below 10 mg/kg DM for part of the year. On one of these farms, the concentration of zinc in faeces was below 30 mg/kg DM throughout the year and this is consistent with zinc intakes of 7 to 15 mg/kg. Despite these low intakes, the concentratons of zinc in plasma were consistently above deficient levels. No clinical signs of deficiencies of any of the elements studied were observed.

• Journal of Conservation Science
• /
• v.5 no.1 s.5
• /
• pp.20-40
• /
• 1996

For obtaining the basic data for establishing plan on the conservation of the Gameunsa 3-story and Naweonri 5-story Pagodas located at the Kyeongju city, the characteristics of the rock and weathering phenomena have been investigated. The former consists of quartz-rlch granite containing small amount of biotite, and the latter of alkali granite with abundant perthite, These rock phases are nearly identical to the marginal phase of medium-grained hornblende-biotite granodiorite and alkali granite respectively, which are distributed around the Kyeongju city. The rock weathering may be governed mainly by chemical weathering of feldspar following physical segregation of quartz grains and pervasive moss. The feldspar easily dissolve In the solution with pH<7 to precipitate clay mineral such as a kaolinite as a secondary phase on the feldspar surface. However, the chemical weathering of feldspar may continue when the surface is washed by the rain according to removal of the reprecipitated phase. On forwarding, the weathering may be greatly Influenced by the acid rain. Exfoliation and weathering along igneous lineation resulting in exfoliating along the structural line are the characteristic weathering phenomena. Also the secondary small cracks are irregularly developed on the rocks due to different strain on places by the overall structural unbalance of the pagodas. Along these cracks, the rain water intrudes deeply into the rocks and weathering occurs intensively compared to other parts. Weathering may be artificially promoted by the grinding or sculpturing when the pagodas were made. Because it may influence on the physical properties of the rocks as well as destruct the surface of the feldspar crystals, the major constituents of the rocks, it results in providing the environment of easy chemical weathering along time. For conservation, the pagodas must be structurally balanced by compacting the soil basement and supplementing rocks on the destroyed part. On the exfoliated part it is better not to be artifically treated as using cementing material. But the cracks may be filled up by cementing material to avoid the intrusion of acidic water. To supplement the rocks on the destroyed part, it may be better to use similar rock phases from identical biotite granite and alkali granite masses around the Kyeongju city.

• Journal of Conservation Science
• /
• v.29 no.2
• /
• pp.171-185
• /
• 2013

The purpose of this study were to interpret making characteristics and clay sources for Proto-Three Kingdoms period potteries which were excavated from Bakjimeure site in Tangjeong, Asan, Korea, on the basis of shape types. The pottery samples of the studied included deep bowl pottery, cylinder shaped pottery, duck shaped pottery and rounded based jar with short neck. And the last jar was dominant among them. This is supported in nearby Yongduri Jinter site, Galmaeri site and Baekseokdong site. They vary in terms of color of clay, absorption ratio and mineral classification. Based on the fact that their absorption ratio range was 4.50 to 25.19% and firing temperature range was 850 to $1,150^{\circ}C$, they were thought to be widely used. The equivalence of cylinder shaped pottery, duck shaped pottery and deep bowl pottery was high in terms of material characteristics and their firing temperature range was 850 to $950^{\circ}C$. However, the deep bowl pottery, compared to other pottery shapes, contained great amount of coarse grained quartz and feldspar, and was different from others in terms of function. For soil sample collected from relative plains (area 3) in the southernmost part of the site, their mineralogical and geochemical characteristics were the most similar to those of the potteries excavated from the Bakjimeure site and even most of the potteries collected from different sites.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.9
• /
• pp.654-659
• /
• 2013

This study was conducted to identify an optimal ratio of carbon to nitrogen (C/N ratio) for denitrification of nitrate using molasses as an external carbon source. A series of batch and column tests was conducted using an indigenous bacterium Pseudomonas sp. KY1 isolated from a nitrate-contaminated soil. For the initial nitrate-nitrogen concentration of 100 mg-N/L, batch test results indicated that C/N ratio of 3/1 was the optimal ratio with a relatively high pseudo-first-order reaction constant of $0.0263hr^{-1}$. At C/N ratio of 3/1, more than 80% of nitrate-nitrogen concentration of 100 mg-N/L was removed in 100 hrs. Results of column tests with a flow velocity of 0.3 mL/min also indicated that the C/N ratio of 3/1 was optimal for denitrification with minimizing remaining molasses concentrations. After 172 hrs of column operation (35 pore volumes) with an influent nitrate-nitrogen concentration of 100 mg-N/L, the effluent met the drinking water standard (i.e., 10 mg $NO_3$-N/L).

• Korean Journal of Organic Agriculture
• /
• v.11 no.2
• /
• pp.103-113
• /
• 2003

The chemical properties of oak tree wood vinegar and the effect of wood vinegar on the tomato seedling were investigated to apply wood vinegar efficiently to the organic - and natural farming system. On the basis of the results from chemical properties of the oak tree wood vinegar, mineral nutrient contents of wood vinegar was low. Therefore, wood vinegar could not be a suitable nutrient source for the plant growth at 500∼1000 times dilution level. which commonly used in the farming, if only wood vinegar is supplied for the nutrient source for the plant growth. The application of wood vinegar increased root growth up the 500 times dilution level while decreased shoot growth. Furthermore. the anion concentrations such as nitrate and phosphate of the plant were decreased by the application of wood vinegar while cation concentrations such as K. Ca. and Mg were increased. Phenolic compounds of wood vinegar such as chlorogenic acid and ferulic acid enhanced the root growth. Interestingly the application of ferulic acid increased both root and shoot growth at the level of 10$^{-4}$ M concentration. It indicated that the effect of wood vinegar on the production of healthy plant seedling may be due to the beneficial root growth by phenolic compounds such as chlorogenic acid and/or ferulic acid of the wood vinegar. However. the effect of the wood vinegar on the plant growth could be influenced by synergism or antagonism of different phenolic compounds in wood vinegar used. In addition. drench in the soil of wood vinegar may be more beneficial compared to foliar application for the improvement of root activity and plant growth.