• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.406-409
• /
• 2002

The primary insulation system used in an oil-filled transformer is Kraft paper, wood, porcelain and, of course, oil. Modern transformers use paper that is chemically treated to improve its tensile strength properties and resistance to aging caused by immersion in oil. These insulation papers are mainly aged to thermal stress. Over the course of the insulation paper and oil's life it is exposed to high temperatures, oxygen and water. Its interaction with the steel of the tank and core plus the copper and aluminium of the windings will eventually cause the chemical properties of the oil to decay. High temperature have an effect on mechanical strength of cellulous paper using the layer insulation. We made two aging cell in which thermal aging tests of insulation papers and mineral oil are conducted. It is measured dielectric strength, number of acid, moisture, etc. of insulation paper and oil aged in the aging cells.

• Journal of the Korean Ceramic Society
• /
• v.33 no.11
• /
• pp.1276-1284
• /
• 1996

Ultrafine calcim carbonate powders with the size of 0.05~0.1 ${\mu}{\textrm}{m}$ and the calcite phase were prepared by the nozzle spouting method which was conducted by spouting calcium hydroxide slurry in reactor filled with CO2 gas. Well dispersed ultra-fine particles were synthesized in condition of high Ca(OH)2 concentration of the slurry ( 0.5wt%) synthesized calcium carbonate powder was shown the large particle size with agglo-meration.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.10
• /
• pp.1832-1838
• /
• 2010

Aging of transformer insulating material in natural ester insulating oil is compared to that in conventional transformer oil. Aging of insulating paper and insulating oil have been studied by performing accelerated thermal aging test. Sealed aging test vessels containing cooper, laminated core, Kraft paper and insulating oil(natural oil or mineral oil) were aged at $140^{\circ}C$ for 500, 1000, 1500 and 2000 hours. Insulating oils after aging are investigated with total acid number, breakdown voltage and viscosity. Also, degradation of insulating paper after aging is determined using breakdown voltage and mechanical strength. Accelerated aging studies demonstrate a slower aging rate for natural ester insulating oil compared to the rate for conventional mineral oil.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.597-600
• /
• 2001

In order to investigate the electrical properties of X-ray tube oils for insulating and cooling, the breakdown characteristics in temperature range of $20\sim100[^{\circ}C]$, that of AC breakdown in 0.5~2.5[mm] of gap length, we are made researches. The classification for the physical properties of oil for X-ray tube by FTIR and H-NMR experiments was confirmed to type of mineral oils. As for the dependance of breakdown characteristics due to electrode gap length, breakdown voltage was found nearly uniform by impurity effect according to the increase of gap. As a result the characteristics for AC breakdown, the dielectric strength was increased to $90[^{\circ}C]$ but decreased over $90[^{\circ}C]$ in the temperature range.

• Journal of Surface Science and Engineering
• /
• v.30 no.4
• /
• pp.239-247
• /
• 1997

The electrochemical machining of carbon steel was carried in various electrolytes which contain NACl and $NaCIO_3$. Though electrolyte containg NaCl yields fast machining rate, dimensional control is rather difficult. In the case of electrolyte with $NaCIO_3$, dimensional control of anode shape can be obtained through modification of cathode design. Mathematical modeling is also performed for these systems and agreements are good compared with experimental date. The constant gap experiment butween two electrode yielded faster machining rate than constant cathode moving rate experiment.

• Journal of Hydrogen and New Energy
• /
• v.19 no.4
• /
• pp.340-347
• /
• 2008

Dissolution process of serpentine in distilled water was systematically investigated for study on pre-treatment of serpentine which was a candidate material for carbon dioxide sequestration. The metallic ions(Ca, Si, Mg etc.) were dissolved in distilled water at ambient condition and their concentrations were changed with dissolution time. The precise evaluation of dissolution process for serpentine dissolved solvent was performed by ion conductivity and pH measurement. Serpentine dissolution in distilled water was evaluated as a stable pre-treatment process without changes of crystallographic structure and chemical structure changes.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.597-600
• /
• 2001

In order to investigate the electrical properties of X-ray tube oils for insulating and cooling, the breakdown characteristics in temperature range of 20∼100[$^{\circ}C$], that of AC breakdown in 0.5∼2.5(mm) of gap length, we are made researches. The classification for the physical properties of oil for X-ray tube by FTIR and $^1$H-NMR experiments was confirmed to type of mineral oils. As for the dependance of breakdown characteristics due to electrode gap length, breakdown voltage was found nearly uniform by impurity effect according to the increase of gap. As a result the characteristics for AC breakdown, the dielectric strength was increased to 90[$^{\circ}C$] but decreased over 90[$^{\circ}C$] in the temperature range.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.605-608
• /
• 2001

With the intention of investigating the breakdown properties of oil-immersed transformer oils in temperature range of 20∼100[$^{\circ}C$], we are made researches AC breakdown in the gap of 500∼2,500[$\mu\textrm{m}$]. The classification for the physical properties of oil for oil-immersed transformer by FTH and $^1$H-NMR experiments was confirmed to type of mineral oils. As the dependance of breakdown properties due to electrode gap length variation, breakdown voltage was found increasing according to the increase of gap, while dielectric strength was decreasing. As a result the characteristics for AC breakdown, It goes to prove that the breakdown voltage was increased to 90[$^{\circ}C$] but decreased over 90[$^{\circ}C$] in the temperature range. Also, breakdown voltage was found increasing in the increase of gap and the rising of temperature according to Weibull distribution.

• The Journal of the Petrological Society of Korea
• /
• v.14 no.4 s.42
• /
• pp.237-250
• /
• 2005

In order to clarify the effect of standard rock material in the chemical analysis of rare earth element abundance with ICP-MS, we measured rare earth element abundance of KIGAM granite standard rock material (KG-1), USGS granite standard rock material (G-2), GSJ granite standard rock materials (JG-1a and JG-2). In REE analysis, we used conventional calibration standard solutions, KG-1, JG-1a, JG-2 and G-2 as standard material, respectively. Chondrite-normalized LREE patterns of low granite standard material correspond well each other in the recommended value and the estimated value regardless of a kind of standard rock. However, the HREE patterns of the estimated value based on G-2 or JG-2 and the recommended value are different from each other. Such difference may be due to the wrong recommended value or a specific geochemical properly of the standard rock material itself, The chondrite-normalized REE patterns of four standard rock materials estimated on the basis of KG-1 or JG-1 a show little deviation compared to the those of the recommended values. This suggests that KG-1 and JG-1a may be a optimum standard material for granitoids.

• Journal of the Mineralogical Society of Korea
• /
• v.19 no.1 s.47
• /
• pp.1-5
• /
• 2006

In this study, we have investigated the purification characteristics of quartz which size was 0.1mm to 0.3 mm by using physical separation techniques. The A and B samples which contained 95,864 mg/kg and 4,568 mg/kg of impurities were reduced upto 126 mg/kg and 174 mg/kg of impurities, respectively. So, removal ratios of the total impurities were about 97.85 wt.% and 96.19 wt.%, individually. At that time, the yields of the purified quartz (over 99.98 wt.% $SiO_2$) were 79.05 wt.% and 75.43 wt.% by using purification process including magnetic separation, gravity separation and scrubbing process. The most benefit in purification process of both different raw materials for iron element can be achieved by magnetic separation. Also, gravity separation is extremely successful for reducing aluminium element.