• Journal of Environmental Health Sciences
• /
• v.23 no.3
• /
• pp.56-65
• /
• 1997

Chemical analysis, statistical analysis and geochemical study were carried out to investigate the influence of the geology on the chemical characferistics of the mineral water in Taegu area. A simple comparision between the chemical components of the mineral water and their bedrocks indicates that the bedrock types in the catchmerit area control the chemical characteristics of the surface water. However more objective evidences for the mineral water-bedrock relationship come from the statistical analyses(cluster analysis and factor analysis). The results of the statistical analyses suggest that the bedrock type factor explains the data variation seven times as much as pollution does, which evidently indicates that the bedrock in the study area mainly control the mineral water chemistries. The results of comparision of the statistical analyses results with the mineral weathering reactions and mineral stability diagrams can be summarized as follows: 1. Plagioclase weathering to kaolinite provides SiO$_2$ , Ca$^{2+}$ and Na$^+$, and muscovite weathering to kaolinite provides K$^+$, and amphibole and mica minerals weathering to kaolinite provides F to the mineral water. Most of Ca$^{2+}$ and Mg$^{2+}$ in the mineral water are the products of carbonate mineral dissolution. SO$_4^{2-}$ may be the byproduct of sulfide oxidation. 2. The weatering of silicate mineral produces Ca-rich smectite and kaolinite, but Ca-rich smectite is unstable and will be transformed to more stable kaolinite because of the continuous dilution of the mineral water by precipitation. By Hashimoto's Mineral Balance Index, S-10 and S-12 mineral spring water were evaluated tasty and healthy water, S-9 and S-11 mineral spring water were evaluated tasty water and S-7, S-8 and S-13 mineral spring water were evaluated healthy water.

• The Journal of the Petrological Society of Korea
• /
• v.13 no.3
• /
• pp.126-132
• /
• 2004

This study provides detailed sample preparation methods for subgrain zircon analyses, and a simple mineral separation technique which overflows light mineral grains out of beaker using the running water from faucet. Excluding separation steps using of the Wilfley table and heavy liquid, this technique is faster and more efficient than conventional one, and remarkably suitable for collecting small amount of zircon for subgrain analyses.

• Journal of the Korean Professional Engineers Association
• /
• v.32 no.6
• /
• pp.60-67
• /
• 1999

299 chemical analyses are used to study the characteristics of mineral and thermal waters in South Korea. Even though the concentration of chemical components in thermal waters are generally very low, mineral waters having components more than 1,000 ppm of dissolved total solid(TDS) are reached up to 19% total analyses data, In Germany, Japan or some other countries, mineral and thermal waters are detined not only by water temperature, but also by chemical components. The principle of Law in Japan in also almost same with the German regulations. However, the Law for thermal spring In Korea permit thermal water to be qualifiled only by water temperature. For including chemical characters into the regulations or Law of thermal spring, the limit values of TDS and other 9 micro components related to mineral and thermal waters was selected through this study.

• Journal of the Korean Professional Engineers Association
• /
• v.33 no.1
• /
• pp.75-82
• /
• 2000

299 chemical analyses are used to study the characteristics of mineral and thermal waters in South Korea. Even though the concentration of chemical components in thermal waters are generally very low, mineral waters having components more than 1,000 ppm of dissolved total solid(TDS) are reached up to 1975 of total analyses data, In Germany, Japan or some other countries, mineral and thermal waters are defined not only by water temperature, but also by chemical components. The principle of Law in Japan is also almost same with the German regulations. However, the Law for thermal spring In Korea permit thermal water to be qualifiled only by water temperature. For including chemical characters into the regulations or Law of thermal spring, the limit values of TDS and other 9 micro components related to mineral and thermal waters was selected through this study.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.651-656
• /
• 2003

Durability of concrete is possibly related to externally-induced chemical attacks in addition to internally-induced deterioration. Externally-induced chemical attacks can be derived from various sources according to environmental conditions under which concrete structures are existing. The present study investigates the characteristic concrete deterioration and formation of secondary minerals by external chemical attacks under certain environmental condition. Petrographic microscope, SEM, EDAX, XRD analyses were conducted to identify secondary mineral formation and micro-structural analyses.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.135-137
• /
• 2003

The purpose of this preliminary study is the applied to geology using the Landsat TM satellite image of the Tanggung area of southern part of the Bandung, Indonesia to provide basic information for geological survey. For this, topography, geology and satellite image were constructed to spatial database. Digital elevation, slope, aspect, curvature, hill shade of topography were calculated from the topographic database and lithology was imported from the geological database. Lineament, lineament density, and NDVI were extracted the Landsat TM satellite image. The results showed the close relationship between geology and terrain and satellite image. Each sedimentary rock seldom corresponds with geology and analyses of topography but as a whole for sedimentary rocks coincide with them. Tuff and volcanic breccia in the volcanic rocks correspond with the result of terrain analyses. Talus deposits is well matched with the analyses of opography/satellite image.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.648-653
• /
• 2003

Optimized recovery of heavy minerals from the near shore sands of Korean Yellow Sea was investigated using physical processing technologies such as gravity concentration and magnetic separation. The head samples were subjected to the three stages effective separation; Head sample was first treated by a spiral separator to recover rough heavy mineral concentrates, which are contained minerals like ilmenite, zircon and rare earth minerals. Much higher beneficiation processes were subsequently taken by wilfley table and magnetic separation according to their magnetic field responses. Heavy minerals were effectively recovered by wilfley table and subsequent recleaning of heavy minerals by magnetic separations was conducted. Qualitative and relative-quantitative analyses of their constituent elements were doing using XRD and XRF.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.1365-1371
• /
• 2008

Based on the data obtained from field investigation and soil testing to slope hazards occurrence section and non-occurrence section in gneiss area, a prediction technique was developed by the use of a decision tree model. The slope hazards data of Seoul and Kyonggi Province were 104 sections in gneiss area. The number of data applied in developing prediction model was 61 sections except a vacant value. The statistical analyses using the decision tree model were applied to the entrophy index. As the results of analyses, a slope angle, a degree of saturation and an elevation were selected as the classification standard. The prediction model of decision tree using entrophy index is most likely accurate. The classification standard of the selected prediction model is composed of the slope angle, the degree of saturation and the elevation from the first choice stage. The classification standard values of the slope angle, the degree of saturation and elevation are $17.9^{\circ}$, 52.1% and 320m, respectively.

• Geosciences Journal
• /
• v.22 no.6
• /
• pp.871-880
• /
• 2018

During and shortly after the 2017 Pohang Earthquake ($M_w$ 5.4), sand blows were observed around the epicenter for the first time since the beginning of instrumental seismic recording in South Korea. We carried out field surveys plus satellite and drone imagery analyses, resulting in observation of approximately 600 sand blows on Quaternary sediment cover in this area. Most were observed within 3 km of the epicenter, with the farthest being 15 km away. In order to investigate the ground's susceptibility to liquefaction, we conducted a trench study of a 30 m-long sand blow in a rice field 1 km from the earthquake epicenter. The physical characteristics of the liquified sediments (grain size, impermeable barriers, saturation, and low overburden pressure) closely matched the optimum ground conditions for liquefaction. Additionally, we found a series of soft sediment deformation structures (SSDSs) within the trench walls, such as load structures and water-escaped structures. The latter were vertically connected to sand blows on the surface, reflecting seismogenic liquefaction involving subsurface deformation during sand blow formation. This genetic linkage suggests that SSDS research would be useful for identifying prehistoric damage-inducing earthquakes ($M_w$ > 5.0) in South Korea because SSDSs have a lower formation threshold and higher preservational potential than geomorphic markers formed by surface ruptures. Thus, future combined studies of Quaternary surface faults and SSDSs are required to provide reliable paleoseismological information in Korea.

• Journal of the Korean Ceramic Society
• /
• v.51 no.2
• /
• pp.97-102
• /
• 2014

In order to improve the refresh rate of old newspaper(ONP), PCC shape-controlling experiments were carried out. The effect of a PCC polymorph on improving the quality of old newspaper was studied for a transformation from waste paper to eco-friendly paper. The synthesis of PCC consists of an in-situ process and a loading process to enhance the refresh rate of old newspaper. The characteristics between the in-situ process and the loading process could be analysed by SEM analyses of coated fiber surfaces. The retention rate ranges from 65 to 67% after the application of the in-situ process, and that after the loading process ranges from 55 to 58%. The retention rates thus show a difference of about 7-10%. In addition, the whiteness and ERIC characteristics of the in-situ process gave more efficient results than those of the loading process.