• 제목/요약/키워드: miner's rule

검색결과 69건 처리시간 0.024초

누적손상법(Miner's rule)을 이용한 철도차량 차체 용접부의 피로평가 (The fatigue analysis using cumulative damage rule (Miner's rule) for the welding areas of carbody structure)

  • 김광우;박근수;박형순
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2007년도 추계학술대회 논문집
    • /
    • pp.30-34
    • /
    • 2007
  • Structural integrity of railway vehicles should last for a long period against various and continuous fatigue loadings, and the carbody structures of railway vehicle are manufactured by applying multiform welding types for each material. Since the most of cracks are occurred and proceeded at the vicinity of welding area during the lifetime of carbody structure, the fatigue strength evaluation for welding area of carbody structure should have been carried out. Rotem Company has evaluated lifetime and fatigue strength of carbody structure according to the fatigue analysis based on the international standard and/or inner-official regulation. This study introduces the fatigue analysis method that we have evaluated and calculated the damages for the welding areas of carbody structure under various fatigue loading conditions using cumulative fatigue damage rule(Miner's rule) to verify whether the cumulative damage does exceed unity. This study contains the fatigue test of specimens to derive stress-life relations(S-N curve), sub-modeling analysis and the calculation of cumulative damages under fatigue loading. The fatigue analysis verifies the welding area shall be capable of withstanding under fatigue loading, identifies how critical area shall be selected and presents the principles to be used for design verification.

  • PDF

A probabilistic analysis of Miner's law for different loading conditions

  • Blason, Sergio;Correia, Jose A.F.O.;Jesus, Abilio M.P. De;Calcada, Rui A.B.;Fernandez-Canteli, Alfonso
    • Structural Engineering and Mechanics
    • /
    • 제60권1호
    • /
    • pp.71-90
    • /
    • 2016
  • In this paper, the normalized variable V=(log N-B)(log ${\Delta}{\sigma}-C$-C), as derived from the probabilistic S-N field of Castillo and Canteli, is taken as a reference for calculation of damage accumulation and probability of failure using the Miner number in scenarios of variable amplitude loading. Alternative damage measures, such as the classical Miner and logarithmic Miner, are also considered for comparison between theoretical lifetime prediction and experimental data. The suitability of this approach is confirmed for it provides safe lifetime prediction when applied to fatigue data obtained for riveted joints made of a puddle iron original from the Fao bridge, as well as for data from experimental programs published elsewhere carried out for different materials (aluminium and concrete specimens) under distinct variable loading histories.

경부고속선의 레일 연마에 따른 레일 피로수명 평가 (Evaluation of Rail Fatigue Life by Grinding of Kyeong-Bu High-Speed Line)

  • 김만철;최은수
    • 한국철도학회논문집
    • /
    • 제13권6호
    • /
    • pp.577-582
    • /
    • 2010
  • 고속철도 운행에 따라 레일표면결함에 대한 관리의 중요성이 점점 더 증대되고 있다. 차량의 고속주행시 레일표면결함은 레일의 피로수명 단축 및 궤도의 열화 촉진, 승차감 저하를 유발하기 때문이다. 현재 경부고속철도에서는 레일의 효율적 유지보수를 위하여 레일연마를 수행하고 있다. 본 논문에서는 레일연마에 따른 레일의 피로수명을 예측하였다. 이를 위해서 연마 후 KTX 운행시 레일 저부의 휨응력을 계측하였으며, Rain-flow counting 기법을 적용하여 빈도해석을 실시하여 RCM에 의해 등가응력범위를 산정하였다. 선형누적피로피해를 이용한 피로수명 평가방법은 수정 Miner 법칙에 기초하였다. 해석결과 연마에 따른 레일의 피로수명이 15% 증가되는 것으로 나타났다.

가속수명시험을 위한 KTX 구조물의 S-N 선도 추정 (S-N Curve Estimation of a KTX Structure for an Accelerated Life Testing)

  • 정달우;최낙삼;박수한
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2008년도 추계학술대회A
    • /
    • pp.384-389
    • /
    • 2008
  • An accelerated fatigue test is essentially required to maintain the reliability of the actual structure of KTX under operation conditions. However, actual fatigue life cannot be obtained if specimens are not adequate to the conventional fatigue test. Moreover component maker did not provide data of loading stress (S) - cycles at the failure (N). In this study, we suggest a prediction method of the S-N curve for establishing an accelerating test under various load levels. Load history was acquired from the field tests. A Rainflow method was used on the cycle counting of the field load data, and then, an S-N curve was obtained through the iteration process under the condition that the damage index satisfies to 1 in the Miner's rule.

  • PDF

슬래브궤도상의 레일 용접부 피로수명 예측 (Prediction of Bending Fatigue Life to Welding Parts of Rail on Slab Track)

  • 김만철;김진성;한상철
    • 한국철도학회논문집
    • /
    • 제4권4호
    • /
    • pp.138-146
    • /
    • 2001
  • For the purpose of the effective maintenance of surface irregularities of rail, this paper investigates the rail service life to a bending fatigue failure of welding parts of rail on the slab track by the structures laboratory testing to derive S-N curves, a GTDAP(General Track Dynamic Analysis Program) to calculate the stresses and a modified Miner's rule to predict a fatigue life. The useful guides for maintenance of rail welded parts on the slab track are proposed in terms of a grinding period and the depth of rail surface irregularities. This study also proposed the guides for maintenance of rail welded part on the ballast track. The effects of fatigue service lives are compared one another.

  • PDF

On the effects of hull-girder vibration upon fatigue strength of a Post-Panamax container ship disaggregated by short-term sea state

  • Fukasawa, Toichi;Mukai, Keiichi
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • 제6권2호
    • /
    • pp.431-441
    • /
    • 2014
  • The effects of hull-girder vibration on the fatigue strength of a Post-Panamax container ship are discussed in the present paper. Firstly, the short-term sea states are categorized according to the occurrence probability of each sea state. Time histories of hull-girder stress in short-term sea states are calculated by means of a nonlinear simulation code of ship response assuming that the hull-girder is rigid and flexible. Then, the calculated stress peaks are processed by the rainflow counting method, where two different counting procedures are used based on the considerations of crack propagation behaviors. Finally, the fatigue damage in life time of the ship in each categorized short-term sea state is estimated by means of Miner's rule. Based on the calculated results, the effects of hull-girder vibrations on the fatigue damage are clarified by disaggregated damage from short-term sea state.

시간영역에서 과도 비틀림 진동에 의한 저속 2행정 디젤엔진의 축계 피로강도 평가 (An Estimation on Two Stroke Low Speed Diesel Engines' Shaft Fatigue Strength due to Torsional Vibrations in Time Domain)

  • 이돈출;김상환
    • 한국소음진동공학회논문집
    • /
    • 제17권7호
    • /
    • pp.572-578
    • /
    • 2007
  • Two stroke low speed diesel engines are widely used for marine propulsion or as power plant prime mover. These engines have many merits which includes higher thermal efficiency, mobility and durability. Yet various annoying vibrations occur sometimes in ships or at the plant itself. Of these vibrations, torsional vibration is very important and dictates a careful investigation during the engme's initial design stage for safe operation. With the rule and limit on torsional vibration in place, shaft strength fatigue due to torsional vibration however demands further analysis which possibly can be incorporated in the classification societies' rule and limit. In addition, the shaft's torsional vibration stresses can be calculated equivalently from accumulated fatigue cycles number due to transient torsional vibration in time domain. In this paper, authors suggest a new estimation method combined with Palmgren-Miner equation. A 6S70MC-C ($25,320ps{\times}91rpm$) engine for ship propulsion was selected as a case study. Angular velocity was measured, instead of shaft's strain, for simplified measurement and it was converted to torsional vibration stress for accumulated fatigue cycle numbers in shafting life time. Likewise, the accumulated fatigue calculation was compared with shaft fatigue strength limit. This new method can be further realized and confirmed in ship with two stroke low speed diesel engine.

가속수명시험을 위한 KTX고속열차 구조물의 S-N 선도 추정 (S-N Curve Deduction of a KTX High-Speed Train Structure for an Accelerated Life Testing)

  • 정달우;최낙삼;박수한
    • 대한기계학회논문집A
    • /
    • 제33권4호
    • /
    • pp.388-395
    • /
    • 2009
  • An accelerated fatigue test is essentially required to maintain the reliability of the actual structures of KTX under operation conditions. However, actual fatigue life cannot be obtained because the conventional fatigue tests are not adequate to the real load conditions. Moreover foreign component makers have not provided data of the loading stresses (S) versus cycles at the failure (N). In this study, we suggested a deduction method of the S-N curve for establishing an accelerating test under various load levels. Load history was acquired from the field tests. A Rainflow method was used on the cycle counting of the field load data. After that, an S-N curve was obtained through the iteration process under the condition that the damage index satisfies to 1 in the Miner's rule. The deduced S-N curve was applied to the performance evaluation of Korean-made sealed knuckles compared with imports.

유한요소 해석을 이용한 선박용 엔진 프레임 박스 용접부의 피로수명 예측 (Fatigue Life Estimation for Welded Parts of Marine Vessel Engine Frame Box by Utilizing Finite Element Analysis)

  • 이재훈;최종호;조진래;이인수
    • 한국전산구조공학회논문집
    • /
    • 제20권5호
    • /
    • pp.573-580
    • /
    • 2007
  • 본 논문은 선박용 엔진인 S60MC-C의 프레임 박스 용접부에 대한 피로수명 예측을 위한 수치적 기법을 제시한다. 피로 수명 평가를 위해 싸이클 동안의 동적인 응력변화를 계산해내야 하며, 이에 따라 선행된 연구에서 얻은 엔진의 한 싸이클 동안의 하중 조건으로 상용 유한요소해석 프로그램을 이용한 구조해석을 실시하였다. 구조해석은 8단계에 대해 이루어 졌으며, 그 결과를 바탕으로 프레임 박스 용접부의 피로수명 평가를 위해서 HSS(Hot spot stress), Reservoir counting method, Palmgren-miner's rule을 적용하였다. 결과적으로 구조해석을 통한 대상 엔진의 취약부와 과잉 설계부를 확인하였고, 피로수명의 평가를 통해 설계의 적절성 여부를 평가하였다.

Variable amplitude fatigue test of M30 high-strength bolt in bolt-sphere joint grid structures

  • Qiu, Bin;Lei, Honggang;Yang, Xu;Zhou, Zichun;Wang, Guoqing
    • Steel and Composite Structures
    • /
    • 제33권3호
    • /
    • pp.433-444
    • /
    • 2019
  • Fatigue failure of a grid structure using bolt-sphere joints is liable to occur in a high-strength bolt due to the alternating and reciprocal actions of a suspension crane. In this study, variable amplitude fatigue tests were carried out on 20 40 Cr steel alloy M30 high-strength bolts using an MTS fatigue testing machine, and four cyclic stress amplitude loading patterns, Low-High, High-Low, Low-High-Low, and High-Low-High, were tested. The scanning electron microscope images of bolt fatigue failure due to variable amplitude stress were obtained, and the fractographic analysis of fatigue fractures was performed to investigate the fatigue failure mechanisms. Based on the available data from the constant amplitude fatigue tests, the variable amplitude fatigue life of an M30 high-strength bolt in a bolt-sphere joint was estimated using both Miner's rule and the Corten-Dolan model. Since both cumulative damage models gave similar predictions, Miner's rule is suggested for estimating the variable-amplitude fatigue life of M30 high-strength bolts in a grid structure with bolt-sphere joints; the S-N fatigue curve of the M30 high-strength bolts under variable amplitude loading was derived using equivalent stress amplitude as a design parameter.