• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.4 s.112
• /
• pp.38-43
• /
• 2005

Natural Com Starch(NCS) spray system has been widely used In multiply board mill for the better bonding strength between board layers. However the unsuitable NCS spray system could lead to a drop in plybond efficiency of multiply board. It could also result in the accumulation of unretained-starch in the white water system, which could not only rise in BOD and COD level but also reduce the effects of rosin-alum sizing system and other additives. In this study, the simple and rapid method by UV-spectroscopy for measuring the starch contents in the white water was proposed, and the quantitative analysis for dissolved starch content in white water was carried out in two kinds of board production process. It could be confirmed that about 150 ppm of oxidized starch was retained in white water dewatered from undertop ply of multiply board process, and about 470 ppm of natural starch was dissolved in white water originated from unsuitable spraying system in the multiply board production lines for cup base paper.

• Journal of the Korean Society of Food Culture
• /
• v.30 no.5
• /
• pp.502-544
• /
• 2015

This study researched a document regarding 'Pyeon (tteok)' on 25 Jong-ga ancestral ritual foods through "Jong-ga Ancestral ritual formalities and food", published during 2003~2008 by the National Research Institute of Cultural Heritage of Cultural Heritage Administration. A after about 10 years, the transmission process of the setting and recipe was compared and analyzed in 2015 by directly visiting 4 Jong-ga. This research classified regions into 7 Gyeonggi, 4 Chungcheong, 2 Honam, and 12 Yeongnam, and classified hakpa, Gyeonggi, Chungcheong, Honam region into 13 Gihohakpa, Yeongnam region into 12 Yeongnamhakpa. The important analysis standard of Jong-ga ancestral ritual food was the region and hakpa, which appeared to considerably influence 'Pyeon' setting style, which represents and symbolizes family and recipe. Gihohakpa Jong-ga, which is an academic tradition that pursues practical interests, seems to highly regard practicality to adapt to changes along with the period. On the contrary, Yeongnamhakpa Jong-ga, which highly regards self-sufficiency living base and moral justification, seems to be highly conservative. Increase in Jong-ga, which utilizes mill, is the result of adaptation to the period environment such as Jongbu aging and lack of labor, etc.

• Journal of Korea Foresty Energy
• /
• v.2 no.2
• /
• pp.1-12
• /
• 1982

To study tile comparison of aboveground biomass of Pinus rigida Mill. of 18-year-old, plantations located in Whaseong, Yuseong and Wanju district were selected. Ten sample trees in each district selected taking account of DBH distribution were felled carefully to minimize loss of branches and stem analysed by 1m lag segment sectioned from base . The tree height and DBH were measured for sample trees in total growing within $200m^2$ experimental plot. The diagram of oven-dry weight distribution of stem, branch and needle for each 1m segment was constructed. The logarithmic regression equations between dry weight of each component and the two variables, $DBH^2$ and tree height, combined term were presented. The standing crops in the sample stand was estimated to be as much as 23.88, 54.09 and 42.68 tons of dry matter, above ground , per ha in Whaseong, Yuseong anf Wanju district respectively. Annual net production was estimated at 253,657 and 3.65 tons per ha per year respectively. The net assimilation rate was 1.65,1.95 and 1.81 kg/kg/yr in Whaseong, Yuseong and Wanju district respectively. The efficency of leaf to produce stem was 0.99, 1.12 and 1.30 kg/kg/yr respectively.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.3
• /
• pp.9-17
• /
• 2001

The floc characteristics of base paper stock for coating by the retention aid system consisting of polyacrylamide (high molecular weight low charge density, HMLC) and PEI without and with anionic inorganic oxide (IO) were investigated under various shear conditions of MDDA (modified dynamic drainage analyzer). The floc size was increased with cationic electrolytes dosage whatever inorganic oxide is applied or not. The effect of inorganic oxide on the floc size showed the different result between PAM and PEI. The smaller floc was obtained by PAM without inorganic oxide, but larger floc was obtained by PAM with inorganic oxide. However, the effect of shear force was not observed. Floc formation index was decreased by the addition of cationic electrolytes with or without inorganic oxide. Floc formation index had better correlation format formation index than floc size. The relationships between wet web permeability and mat air permeability showed the significant linear correlation ($R^2$=0.97~0.98) for HML PAM and PEI. Floc formation index gave more useful information than the retention measurement when the performance of retention aids is evaluated at the laboratory before applying at the paper mill.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.5
• /
• pp.67-71
• /
• 2000

The history of the paper industry has shown a strong technological evolution which has been an essential factor in achieving low cost, high quality paper products and in sustaining the strength of the industry. In the last decades paper machine development has been rapid. This has helped to establish paper as a "low cost" material. In future, the pressure from the competing media will only accelerate the technological efforts to improve cost and functional'||'&'||'not;ity of paper. In addition, in the future, technological advances will be combined with innovation in busi'||'&'||'not;ness concepts. Certain production methods are likely to be developed which will distribute current process stages outside the paper mill. Papermakers can begin to reduce their invest'||'&'||'not;ment risk by subcontracting large-scale base paper production but taking responsibility for the higher value finishing process stages. Finishing will be more closely integrated with the final use. The role of technology supplier to the paper industry will naturally evolve to reflect all these changes. Metso is already actively collaborating downstream in the different paper-related business chains. This collaboration will be crucial for implementation of new business and technology innovations in P'||'&'||'P industry and Metso will certainly benefit from its catalyst role in this transition.

• Journal of Ceramic Processing Research
• /
• v.19 no.6
• /
• pp.483-491
• /
• 2018

Effects of additives on phase development and physico-mechanical properties of mullite-carbon was investigated. Powdered clay, kaolinite and graphite of predetermined compositions were blended with additives using ball mill for 3 hrs at 60 rev/min. Samples were produced by uniaxial compression and sintered between $1400^{\circ}C$ and $1600^{\circ}C$ for one hr. They were characterized for various properties, developed phases and microstructural features. It was observed that the properties and phase developments in the samples were influenced by the additives. 10 wt % SiC served as nucleating point for SiC around $1400^{\circ}C$. 10wt % $TiO_2$ lead to development of 2.5 wt % TiC at $1500^{\circ}C$ which increased to 6.8 wt % at $1600^{\circ}C$. Ifon clay in the sample leads to development of anorthite and microcline in the samples. 10wt % $TiO_2$ is effective as anti-oxidant for graphite up to $1500^{\circ}C$. Base on strength and absorbed energy, sample C (with 10wt % $TiO_2$) sintered at $1500^{\circ}C$ is considered to be optimum.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.1
• /
• pp.77-83
• /
• 2011

In this thesis, 50W Doherty amplifier was designed and implemented for Beyond 3G's repeater and base-station. Auxiliary amplifier of doherty amplifier was implemented by Gate bias control circuit. Though gate bias control circuit solved auxiliary's bias problem, output characteristics of doherty amplifier was limited. To enhance the output characteristic relativize Drain control circuit And To improve power efficiency make 3-way Doherty power amplifier. therefore, 3-way GDCD (Gate and Drain bias Control Doherty) power amplifier is embodied to drain bias circuit for General Doherty power amplifier. The 3-way GDCD power amplifier composed of matching circuit with chip capacitor and micro strip line using FR4 dielectric substance of specific inductive capacity(${\varepsilon}r$) 4.6, dielectric substance height(H) 30 Mills, and 2.68 Mills(2 oz) of copper plate thickness(T). Experiment result satisfied specification of amplifier with gains are 57.03 dB in 2.11 ~ 2.17 GHz, 3GPP frequency band, PEP output is 50.30 dBm, W-CDMA average power is 47.01 dBm, and ACLR characteristics at 5MHz offset frequency band station is -40.45 dBc. Especially, 3-way DCHD power amplifier showed excellence efficiency performance improvement in same ACLR than general doherty power amplifier.

• Korean Journal of Food Science and Technology
• /
• v.31 no.2
• /
• pp.380-384
• /
• 1999

For the effective utilization of anchovy as a food source, processing conditions of expanded anchovy snack and monolayer moisture content of the products were investigated. Ground anchovy was mixed with 50% of wheat flour, 2.5% of NaCl and 3.0% of onion. The mixture were rolled, cut, dried and finally deep-fried with soybean oil. When 50% of wheat flour was mixed with ground anchovy, expansion rate showed the highest value among the treatments and organoleptic quality of the product was also high. Dried base with 6.4% of moisture content showed the maximum expansion rate and good crispness and brittleness when fried at $200^{\circ}C$. Monolayer moisture content of the expanded products was calculated as 2.77% by BET equation.

• Journal of Powder Materials
• /
• v.14 no.4
• /
• pp.265-271
• /
• 2007

Electromagnetic wave absorbing materials have been developed to reduce electromagnetic interference (EMI) for electronic devices in recent years. In this study, Fe-Si-B-Nb-Cu base amorphous strip was pulverized using a jet mill and an attritor and heat-treated to get flake-shaped nanocrystalline powders, and then the powders were mixed, cast and dried with dielectric $Al_{2}O_{3}$ powders and binders. As a result, the addition of $Al_{2}O_{3}$ powders improved the absorbing properties of the sheets noticeably compared with those of the sheets without dielectric materials. The sheet mixed with 2 wt% $Al_{2}O_{3}$ powder showed the best electromagnetic wave absorption, which was caused by the increase of the permittivity and the electric resistance due to the dielectric materials finely dispersed on the Fe-based powder.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.1
• /
• pp.12-20
• /
• 2008

Radial and vertical variations of relative crystallinity and crystallite width of cellulose within stems of three softwoods (Pinus densiflora S. et Z., P. koraiensis S. et Z, P. rigida Mill.) grown in Korea were examined by an X-ray diffraction method. The mean of relative crystallinity was 61.7% in P. koraiensis, 60.6% in P. densiflora and 49.4% in P. rigida. The degree of crystallinity in earlywood and latewood increased with the age from pith to about 10~15 years, and then remained almost constant value. The relative crystallinitiy of latewood was slightly higher than that of earlywood. The relative crystallinity in P. densiflora was a little lower at the base of stem, but no significant difference by height was shown in P. koraiensis and P. rigida. The crystallite widths in the stems were 2.8 to 3.0 nm, but were not significantly different in earlywood and latewood by height. In conclusion, the relative crystallinity appeared to be a useful index for separating juvenile wood from adult wood in the softwoods of P. densiflora, P. koraiensis, and P. rigida grown in Korea.