• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.424-429
• /
• 2004

The high speed machining center(HMC) has been widely applied to manufacture a die and trial product in many machine industry. Because the evaluation for HMC is not sufficiently performed and the efficient cutting conditions can't be selected, a peat loss has been caused in the cost aspect. In this study, the need of preliminary running time and unstable spindle speed is presented by the analysis of acceleration in idling. The Machinability for the TiA1N coated flat end mill and STD11 (H$\sub$R/C60) is evaluated from the trends of tool wear and cutting force according to cutting conditions . The resonance spindle speed is identified through the tool wear and natural frequency test.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 Proceedings of Pre-symposium of the 10th ISWPC
• /
• pp.56-60
• /
• 1999

In this paper, a series of amphoteric polyacrylamide(PAM) with different molecular weight and charge were synthesized and used as retention and dewatering aids. Better products had been selected and tested under varied conditions. Effects of molecular weight, cationic charge density, degree of hydrolysis and other factors of PAM on retention and dewatering of papermaking were also considered. Finally, synthesized quaternary and tertiary ammonium amphoteric polyacrylamide were practised in paper mill trial.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.419-422
• /
• 2008

It is most important to design the roll pass in shape rolling process. However, roll pass design has been accomplished by experience and intuition of a skilled engineer up to now. And it has being produced throughout a lot of trial and error. Thus, in this study, we tried to analysis the rolling process of H-beam by using FEM program for the quantitative evaluation of the plastic deformation. It could be predicted that rolling load, torque, shape of cross section and distribution of effective strain each pass by the analysis of rolling from break down mill(2 Hi rolling) to finishing rolling(Universal rolling) considering the heat transfer.

• 펄프종이기술
• /
• 제30권4호
• /
• pp.18-27
• /
• 1998

Biopulping is defined as the treatment of wood chips with lignin-degrading fungi prior to pulping. Fungal pretreatment prior to mechanical pulping reduces electrical energy requirements during refining or increases mill throughput, improves paper strength, reduces the pitch content, and reduces the environmental impact of pulping. Our recent work involved scaling up the biopulping process towards the industrial level, investigating both the engineering and economic feasibility. We envision the process to be done in either a chip-pile or silo-based system for which several factors need to be considered: the degree of decontamination, a hospitable environment for the fungus, and the overall process economics. Currently, treatment of the chips with low-pressure steam is sufficient for decontamination and a simple, forced ventilation system maintains the proper temperature, humidity, and moisture conditions, thus promoting uniform growth of the fungus. The pilot-scale trial resulted in the successful treatment of 4 tons of wood chips (dry weight basis) with results comparable to those on a laboratory. Larger, 40-ton trials were also successful, with energy savings and paper properties comparable with the laboratory scale. The overall economics of the process also look very favorable and can result in significant annual savings to the mill. Although the current research has focused on biopulping for mechanical pulping, it is also beneficial for sulfite chemical pulping and some applications to recycled fiber have been investigated.

• 펄프종이기술
• /
• 제34권2호
• /
• pp.1-12
• /
• 2002

Starch dissolved in paper-mill wastes, either as a result of poor retention on the paper web or recycling of surface-treated broke, was a major pollutant Laboratory tests were performed by using different kinds of starch as a surface treatment. It was concluded that the use of cationic starch can positively affect the level of starch dissolved in liquid effluents. When cationically modified starches were used for surface sizing, the starch was tightly bound to the paper fibers, it was not removed during the repulping of broke. The result of mill trial in fine paper manufacture for the application of low-viscosity cationic starches used in size press reduced COD load in the effluents and increased One Pass Retention. It had been found that when cationic starch used as a surface sizing agent, more starch was retained on or near the surface of the sheet than with conventional oxidized starches. Thus surface strengths and quality were improved. In addition it is possible to maintain the desired level of starch penetration into the fiber net and improve porosity, opacity and brightness. In contrast, in most cases, dusting problems are notably eliminated. Cationic surface sized starch improved black and color ink-jet print quality in terms of feathering and optical density of the print image. These improved properties were believed to be due to a combination of fiber bonding and surface orientation more uniform starch concentration on the paper surface was resulted. Moreover cationic charges in the paper surface lend themselves excellently to fix ink jet ink anionic in nature.

• Asian-Australasian Journal of Animal Sciences
• /
• 제20권11호
• /
• pp.1738-1745
• /
• 2007

A growth trial and a digestibility trial were conducted to examine the effect of feed particle size on the performance, nutrient digestibility, gastric ulceration and intestinal morphology in pigs fed barley-based diets. Barley was processed through a hammer mill to achieve four diets varying in particle size (average particle $size{\pm}standard $deviation): coarse ($1,100{\pm}2.19\;{\mu}m$), medium ($785{\pm}2.23\;{\mu}m$), fine ($434{\pm}1.70\;{\mu}m$) and mixed (1/3 of coarse, medium and fine) ($789{\pm}2.45\;{\mu}m$). Sixty-four entire male pigs were used in the growth trial and the diets were fed ad libitum between 31 kg and 87 kg live weight. Following slaughter, stomach and ileal tissues were scored for integrity (ulceration or damage) and histological measurements taken. Twenty-four entire male pigs were used in the digestibility trial, which involved total faecal collection. Over the entire growth phase, there were no differences (p>0.05) in average daily gain and feed conversion ratio between pigs fed diets of different particle size. Pigs fed the coarse and medium diets had lower (p<0.05) stomach ulceration scores (0.20 and 0.25, respectively, on a scale from 0 to 3) than those fed the mixed (0.69) or the fine diets (1.87). The stomachs of all animals fed the fine diet had lesions and stomach ulcerations were present only in this group. Pigs fed the fine diet had thicker (p<0.001) ileal epithelial cell layer with no differences (p>0.05) being observed for villous height or crypt depth. Faecal digestibility coefficients of neutral and acid detergent fibre were the highest (p<0.05) for the mixed diet, intermediate for the fine and coarse diets and the lowest for the medium diet. A similar numerical trend (p = 0.103) was observed for the apparent faecal energy digestibility coefficient. It is concluded that, with barley based diets, a variation in average particle size between $400{\mu}m$ and $1,100{\mu}m$ had no effect on pig performance but the fine dietary particle size affected the integrity of the stomach, as well as the structure of the small intestine, thus compromising overall gut health. Our data also demonstrate that changes in particle size distribution during the digestion process, rather than average particle size or particle size variation, are related to apparent faecal digestibility.

• Physical Therapy Rehabilitation Science
• /
• 제1권1호
• /
• pp.33-39
• /
• 2012

Objective: The objective of this study is to investigate the effect of treadmill training with real optic flow scene on functional recovery of balance and balance self-efficacy in stroke patients. Design: Single blind, Randomized controlled trial. Methods: Nine patients following stroke were divided randomly into the treadmill with optic flow group (n=3), treadmill with virtual reality group (n=3), and control group (n=3). Subjects in the treadmill with optic flow group wore a head-mounted display in order to receive a speed modulated real optic flow scene during treadmill training for 30 minutes, while those in the treadmill with virtual reality group and control group received treadmill training with virtual reality and regular therapy for the same amount of time, five times per week for a period of three weeks. Timed up and go test (TUG) and activities-specific balance confidence scale (ABC scale) were evaluated before and after the intervention. Results: TUG in the treadmill training with optic flow group showed significantly greater improvement, compared with the treadmill training with virtual reality group and control group (p<0.05). Significantly greater improvement in the ABC scale was observed in the treadmill training with optic flow group and the tread mill training with virtual reality group, compared with the control group (p<0.05). Conclusions: Findings of this study demonstrate that treadmill training with real optic flow scene can be helpful in improving balance and balance self-efficacy of patients with chronic stroke and may be used as a practical adjunct to routine rehabilitation therapy.

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권2호
• /
• pp.224-230
• /
• 2001

This study was conducted to evaluate the extruding effects of corn and wheat on growth performance and fecal digestibility of amino acids in early-weaned pigs. Ground corn and wheat by a hammer mill (3 mm screen in diameter) were extruded at $130{\pm}2^{\circ}C$ with a moist-type extruder ($Matador^{(R)}$). Treatments were: 1) 3 mm ground corn, 2) extruded corn, 3) 3 mm ground wheat, and 4) extruded wheat. A total of 160 pigs (14 d of age and $4.3{\pm}0.74kg$ BW) were allotted with the dietary treatments for a 21-d feeding trial. All diets were mash and contained 30% corn or wheat products. For a digestibility trial, 16 pigs (14-d old and $4.2{\pm}0.32kg$ BW) were employed in individual metabolic crates. There were no differences (p>0.15) in growth performance between corn-fed and wheat-fed groups. Feeding pigs diets containing extruded corn or wheat did not affect ADG (p>0.15) and ADFI (p>0.15), but it improved feed/gain (p<0.01). Also, feeding pigs diets containing extruded corn or wheat had lower true fecal digestibilities of arginine, histidine, isoleucine, lysine and valine (p<.007) in the pigs. In conclusion, our results suggest that extruding corn and wheat had no benefit on the growth of early-weaned pigs.

• 한국기계가공학회지
• /
• 제16권5호
• /
• pp.78-84
• /
• 2017

Compared to other types of power, hydraulic energy is the most commonly used for heavy vehicles and ships because it has fewer location and space constraints, and its controllability can be maintained even under adverse conditions. Operators have controlled a main control valve of ship winches by pushing or pulling the lever, which is directly connected to the spool. However, because of the spatial arrangement, the importance of remote control valves has emerged. In this paper, experiments of the hysteresis characteristics were performed by analyzing the remote-control valve using a valve tester and RA2300. The validity was verified by comparing with the analytical model using SimulationX as the hydraulic analysis program. This study examined the effects of the spool's notch (Non, End-mill, and Spherical) and the effects of stiffness and pre-load of the spool spring on Spool stroke, open area, and hysteresis characteristics. It is considered possible to reduce the cost and the, trial and error process in designing remote-control valves in the future.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권12호
• /
• pp.1729-1735
• /
• 2004

A total of 140 weaning pigs were used to determine the effects of digestive enzyme supplementation to corn-soybean meal diets on growth performance, physiological changes of small intestine, microorganisms and pH in the gastrointestinal tract. Two kinds of enzyme complex (A, B) were used in this experiment. Pigs were allotted in a completely random design (CRD) to five replicates with four pigs per pen. Diets and water were provided for ad libitum consumption. Treatments included 1) Control: without enzyme supplementation, 2) Enzyme A 0.05%, 3) Enzyme A 0.10%, 4) Enzyme A 0.15%, 5) Enzyme B 0.05%, 6) Enzyme B 0.10%, 7) Enzyme B 0.15% in the diets. A total of 24 crossbred barrows 25.78${\pm}$0.55 kg BW fitted with simple ileal T-cannulas were used to evaluate the effect the enzyme addition on the nutrient digstibility. Pigs were allotted 4 treatments (No enzyme, enzyme A 0.05%, enzyme A 0.1%, enzyme A 0.15%), 6 replicates according to a completely random design (CRD). Another digestibility trial was followed for enzyme complex B. Twenty pigs, average 31.92${\pm}$0.37 kg BW, fitted with simple ileal T-cannulas for digestibility trial. Neither enzyme A nor enzyme B affected on fecal or ileal digestibility of dry matter, gross energy, crude protein, crude fat and crude ash (p>0.05). The apparent fecal digestibilities of all the nutrients were higher in total feces collection method than in indirect method. At the end of feeding trial, 21 pigs were slaughtered for examining the morphological changes of small intestine and the concentration of microorganisms in the ileum and the colon. Growth performance, intestinal morphology and pH of ileum and colon were not affected by the either enzyme complex supplementation (p>0.05). These results suggested that enzyme complex A and enzyme complex B were of no benefit to early-weaned pigs when corn-soybean meal based diet was provided.