• 한국토양환경학회지
• /
• 제3권3호
• /
• pp.55-62
• /
• 1998

탄화수소계 화합물이나 중금속 잔류물 등으로 오염된 토양은 토양세척방법에 의해 효과적 으로 처리할 수 있다. 본 연구에서 토양세척공정을 개발하는데 있어 토양으로부터 오염물을 분리하기 위한 몇 가지 주요 핵심 공정기술들은 채광기술과 화학공정기술의 접목을 통하여 점차적으로 개선되어 얻어졌다. 본 파일롯 규모의 토양세척장치는 공정 상 크게 네 부분으로 이루어져 있다. 1) 기계적 마찰, 2) 세척수를 이용한 세탁작용, 3) 최종세정, 4) 오염된 세척수의 재생. 장치는 현장에서 오염토양을 시간당 5톤 속도로 처리하기 위한 규모로 설계하였다. 오염된 토양 덩어리는 먼저 1차 세척부인 회전 마찰 분쇄 관을 통과하면서 개개의 토양입자로 부셔지고 다음, 교반날이 설치된 2차 세척부에서 세척수와의 강한 마찰효과에 의해 오염물의 탈착이 이루어지게 된다. 최종 단계인 3차 세척부에선 세척된 토양을 최종적으로 물분사장치를 이용하여 세정하고 오염된 세척수와 정화된 토양을 역방향으로 분리하여 각각 배출시킨다. 세척수를 연속적으로 재사용하기 위하여 오염된 세척수는 미세토의 응집, 침전과 기름성분의 부상분리가 이루어지는 세척수 처리조를 거쳐 세척부로 다시 반송되도록 하였다. 추후 이동과 운전비용을 줄이면서 현장에 적합한 토양세척장치의 적용성을 얻기 위하여 트레일러에 탑재된 이동형 토양세척장치개발에 대한 연구를 진행할 것이다.

• 한국수산과학회지
• /
• 제30권5호
• /
• pp.730-743
• /
• 1997

본 연구는 광양제철소 건설을 위해 매립과 준설이 행해지고 있던 시기인 1983년 8월과 1984년 2월에 이와 같은 대규모의 환경교란이 다모류 군집 구조 및 분포에 미치는 영향을 알아보기 위해 실시되었다. 여름철의 다모류 군집은 총 76종이 출현하였으며, 평균밀도는 $342\;ind.{\cdot}m^{-2}$, 겨울철에는 76종, $437\;ind.{\cdot}m^{-2}$의 밀도를 보였다. 종수 및 밀도의 지역적인 분포 양상은 섬진강 하구역에서는 낮은 종수와 다양도, 수로지역에서는 높은 출현종수와 다양도, 그리고 묘도 서쪽 내만역에 서는 종수, 다양도, 밀도 모두가 중간정도의 값을 기록했다. 하계 다모류군집의 집괴분석 결과 5개의 정점군으로 나눌 수 있었으며, 이런 결과는 광양만에서의 다모류 군집이 섬진강에서 유입되는 담수 및 퇴적환경과 밀접한 관계가 있음을 보여주고 있다. 그러나 겨울철 군집의 분석 결과는 하계와는 다소 상이 한 결과를 보였다. 우점종의 조성에 있어서도 1982년도의 조사시 (Choi and Koh, 1984) 우점종이던 Lagis bocki와 Chone teres가 다모류군집내에서 차지하는 비율이 감소한 반면 본 조사시에는 Glycinde gurjanovae와 Heteromastus filiformis의 개체군은 점차 증가하는 결과를 보였다. 이와 같은 결과를 Shin and Koh (1990)와 Jung et al. (1995)의 결과와 비교해 볼 때 광양만에서 행해진 대규모의 매립 및 준설은 저서 다모류군집에 영향을 주고 있으며, 본 조사기간 동안에는 저서다모류 군집이 서서히 변해가는 과정중의 중간단계에 처해있는 것으로 판단된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.386-386
• /
• 2012

For white light emitting diode (LED) applications, it has been reported that Y3Al5O12:Ce3+ (YAG:Ce) in nano-sized phosphor performs better than it does in micro-sized particles. This is because nano-sized YAG:Ce can reduce internal light scattering when coated onto a blue LED surface. Recently, there have been many reports on the synthesis of nano-sized YAG particles using bottom-up method, such as co-precipitation method, sol-gel process, hydrothermal method, solvothermal method, and glycothermal method. However, there has been no report using top-down method. Top-down method has advantages than bottom-up method, such as large scale production and easy control of doping concentration and particle size. Therefore, in this study, nano-sized YAG:Ce phosphors were synthesized by a high energy beads milling process with varying beads size, milling time and milling steps. The beads milling process was performed by Laboratory Mill MINICER with ZrO2 beads. The phase identity and morphology of nano-sized YAG:Ce were characterized by X-ray powder diffraction (XRD) and field-emission scanning electron microscopy (FESEM), respectively. By controlling beads size, milling time and milling steps, we synthesized a size-tunable and uniform nano-sized YAG:Ce phosphors which average diameters were 100, 85 and 40 nm, respectively. After milling, there was no impurity and all of the peaks were in good agreement with YAG (JCPDS No. 33-0040). Luminescence and quantum efficiency (QE) of nano-sized YAG:Ce phosphors were measured by fluorescence spectrometer and QE measuring instrument, respectively. The synthesized YAG:Ce absorbed light efficiently in the visible region of 400-500 nm, and showed single broadband emission peaked at 550 nm with 50% of QE. As a result, by considering above results, high energy beads milling process could be a facile and reproducible synthesis method for nano-sized YAG:Ce phosphors.

• Asian-Australasian Journal of Animal Sciences
• /
• 제20권11호
• /
• pp.1738-1745
• /
• 2007

A growth trial and a digestibility trial were conducted to examine the effect of feed particle size on the performance, nutrient digestibility, gastric ulceration and intestinal morphology in pigs fed barley-based diets. Barley was processed through a hammer mill to achieve four diets varying in particle size (average particle $size{\pm}standard $deviation): coarse ($1,100{\pm}2.19\;{\mu}m$), medium ($785{\pm}2.23\;{\mu}m$), fine ($434{\pm}1.70\;{\mu}m$) and mixed (1/3 of coarse, medium and fine) ($789{\pm}2.45\;{\mu}m$). Sixty-four entire male pigs were used in the growth trial and the diets were fed ad libitum between 31 kg and 87 kg live weight. Following slaughter, stomach and ileal tissues were scored for integrity (ulceration or damage) and histological measurements taken. Twenty-four entire male pigs were used in the digestibility trial, which involved total faecal collection. Over the entire growth phase, there were no differences (p>0.05) in average daily gain and feed conversion ratio between pigs fed diets of different particle size. Pigs fed the coarse and medium diets had lower (p<0.05) stomach ulceration scores (0.20 and 0.25, respectively, on a scale from 0 to 3) than those fed the mixed (0.69) or the fine diets (1.87). The stomachs of all animals fed the fine diet had lesions and stomach ulcerations were present only in this group. Pigs fed the fine diet had thicker (p<0.001) ileal epithelial cell layer with no differences (p>0.05) being observed for villous height or crypt depth. Faecal digestibility coefficients of neutral and acid detergent fibre were the highest (p<0.05) for the mixed diet, intermediate for the fine and coarse diets and the lowest for the medium diet. A similar numerical trend (p = 0.103) was observed for the apparent faecal energy digestibility coefficient. It is concluded that, with barley based diets, a variation in average particle size between $400{\mu}m$ and $1,100{\mu}m$ had no effect on pig performance but the fine dietary particle size affected the integrity of the stomach, as well as the structure of the small intestine, thus compromising overall gut health. Our data also demonstrate that changes in particle size distribution during the digestion process, rather than average particle size or particle size variation, are related to apparent faecal digestibility.

• 동의신경정신과학회지
• /
• 제25권2호
• /
• pp.179-190
• /
• 2014

Objectives: This study was performed to review the research trends regarding the treatment of Postpartum Depression (P.P.D) in the Traditional Chinese Medicine (TCM). Methods: We searched articles in CNKI (China National Knowledge Infrastructure) from 2004 to 2013. Search key words were "产后抑郁症", "Postpartum Depression", and we selected 27 studies except for non-clinical studies, insufficient number of studies, unrelated studies and tests on animals. Results: We selected 27 articles with following results: 1) One study of Jadad Quality Assessment Scale score showed 3 points, 4 studies showed 2 points and 22 studies showed less than 1 point. Overall, the quality of the studies was low. 2) DSM - IV was frequently used as a diagnostic criteria and HAMD was mostly used as evaluation criteria. Diagnostic criteria and evaluation criteria were the same in HAMD and EPDS. 3) In TCM, there are various ways, such as herbal medicine, acupuncture, electro acupuncture, auricular acupuncture and/or massage to treat the postpartum depression. 4) The roots of Bupleurum falcatum Linne, Glycyrrhiza uralensis Fisch, Angelica gigas Nakai and Paeonia lactiflora Pall, the rhizome of Atractylodis macrocephala Koidz, the semen of Zizyphus jujuba Mill, the radix of Curcuma aromatica Salisb, the sclerotium of Poria cocos Wolf and the rhizomas of Cyperus rotundus L and of Cnidium officinale Makino are mainly used in the herbal medicine. BaekHoi (GV20) and Yindang (Ex-HN3) are mainly used in acupuncture points. 5) Most of the studies showed effective results. Some of the results were similar to those of the control groups which were cured by western medicine. Other results were better than those of control groups. Conclusions: Research on postpartum depression has been actively conducted in TCM and all studies showed effective results in the study group patients. Therefore, with this study, we hope to activate more clinical research on the treatment of patients in Korean traditional medicine.

• 한국환경과학회지
• /
• 제23권12호
• /
• pp.2045-2056
• /
• 2014

In this study, pressure drop was measured in the pulse jet bag filter without venturi on which 16 numbers of filter bags (Ø$140{\times}850{\ell}$) are installed according to operation condition(filtration velocity, inlet dust concentration, pulse pressure, and pulse interval) using coke dust from steel mill. The obtained 180 pressure drop test data were used to predict pressure drop with multiple regression model so that pressure drop data can be used for effective operation condition and as basic data for economical design. The prediction results showed that when filtration velocity was increased by 1%, pressure drop was increased by 2.2% which indicated that filtration velocity among operation condition was attributed on the pressure drop the most. Pressure was dropped by 1.53% when pulse pressure was increased by 1% which also confirmed that pulse pressure was the major factor affecting on the pressure drop next to filtration velocity. Meanwhile, pressure drops were found increased by 0.3% and 0.37%, respectively when inlet dust concentration and pulse interval were increased by 1% implying that the effects of inlet dust concentration and pulse interval were less as compared with those changes of filtration velocity and pulse pressure. Therefore, the larger effect on the pressure drop the pulse jet bag filter was found in the order of filtration velocity($V_f$), pulse pressure($P_p$), inlet dust concentration($C_i$), pulse interval($P_i$). Also, the prediction result of filtration velocity, inlet dust concentration, pulse pressure, and pulse interval which showed the largest effect on the pressure drop indicated that stable operation can be executed with filtration velocity less than 1.5 m/min and inlet dust concentration less than $4g/m^3$. However, it was regarded that pulse pressure and pulse interval need to be adjusted when inlet dust concentration is higher than $4g/m^3$. When filtration velocity and pulse pressure were examined, operation was possible regardless of changes in pulse pressure if filtration velocity was at 1.5 m/min. If filtration velocity was increased to 2 m/min. operation would be possible only when pulse pressure was set at higher than $5.8kgf/cm^2$. Also, the prediction result of pressure drop with filtration velocity and pulse interval showed that operation with pulse interval less than 50 sec. should be carried out under filtration velocity at 1.5 m/min. While, pulse interval should be set at lower than 11 sec. if filtration velocity was set at 2 m/min. Under the conditions of filtration velocity lower than 1 m/min and high pulse pressure higher than $7kgf/cm^2$, though pressure drop would be less, in this case, economic feasibility would be low due to increased in installation and operation cost since scale of dust collection equipment becomes larger and life of filtration bag becomes shortened due to high pulse pressure.

• 한국산림과학회지
• /
• 제32권1호
• /
• pp.29-35
• /
• 1976

항도지역(港都地域)(부산(釜山), 인천(仁川)), 호남지역(湖南地域)(전남북(全南北)), 관동지역(關東地域)(강원(江原), 경북(慶北))에서 총(總) 96개소(個所)의 표목제재소(標木製材所)를 선정(選定)하여 Cobb-Douglas 생산함수(生産函數)를 유도(誘導)한 다음 1967-1975년(年) 사이의 기술진보율(技術進步率)과 제재생산인자(製材生産因子)의 생산성(生産性) 및 적정요소투입량(適正要素投入量)을 계측(計測)하였으며, 그 결과(結果)를 요약(要約)하면 다음과 같다. 1. 3지역(地域)에서 모두 제재소(製材所)의 평균규모(平均規模)는 증대(增大)하는 경향(傾向)이 있다. 즉 제재소당(製材所當) 보유마력수(保有馬力數)의 증가율(增加率)은 항도지역(港都地域)이 91.0%, 호남지역(湖南地域)이 7.7%, 관동지역(關東地域)이 16.9%로 나타났다. 이는 외재수입항(外材輸入港)을 중심(中心)으로한 도불형(都巿型) 제재소(製材所)가 크게 발전(發展)하고 있음을 뜻한다. 2. 1967년(年)에는 3지역(地域) 제재생산함수(製材生産函數)의 회귀계수(回歸係數)(생산탄성치(生産彈性値))가 거의 비슷하였으나 1975년(年)에는 지역간(地域間)의 차이(差異)가 현저(顯著)하게 나타났다. 즉 1967년(年)의 생산제약요인(生産制約要因)은 3지역(地域)에서 모두 자본(資本)이었으나 1975년(年)에는 관동지역(關東地域)만이 자본(資本)의 제약(制約)을 받고 있다. 탄성치(彈性値)의 합계(合計)는 ${\alpha}+{\beta}$ > 1이므로 규모(規模)에 대한 보수(報酬)는 모두 점증적(漸增的)인 상태(狀態)에 있다. 3. 관측기간중(觀測期間中)의 기술진보율(技術進步率)은 항도지역(港都地域)이 17.58%, 호남지역(湖南地域)이 7.58%, 관동지역(關東地域)이 2.24%이다. 자본생산성(資本生産性)에 비(比)하여 노동생산성(勞動生産性)이 높은 지역(地域)은 항도지역(港都地域)이며, 이는 자본집약적(資本集約的)인 경영(經營)이 이루어지고 있음을 뜻한다. 그러나 경제여건(經濟與件)이 안정(安定)되어 있는 외국(外國)의 경우에 비추어 볼 때, 3지역(地域)의 노동탄성치(勞動彈性値)가 자본탄성치(資本彈性値)에 비하여 높다는 것은 상대적(相對的)으로 자본생산성(資本生産性)의 하위성(下位性), 즉 과대 자본투자(資本投資)를 의미하는 것으로 제재용재(製材用材)의 공급량(供給量)이 증가(增加)되지 않는 한(限) 미이용자본(未利用資本)의 회수(回收)가 필요(必要)할 것으로 생각된다. 4. 이윤극대화(利潤極大化)를 위한 생산요소(生産要素)의 적정투입량(適正投入量)은 산출물(産出物)과 투입물(投入物)의 가격변화(價格變化)에 따라 달라지나, $m^2$당(當) 제재목(製材木) 가격(價格)이 50,000원, 기업(企業)의 매출총이익율(賣出總利益率)이 9%, 연간노임(年間勞賃)이 540,000원, 마력당(馬力當) 가격(價格)이 100,000원일 때, 항도지역(港都地域), 호남지역(湖南地域), 관동지역(關東地域)에서 자본(資本)과 노동(勞動)의 적정투입량(適正投入量)은 각각(各各) 57 : 17, 427 : 94, 192 : 27로 나타났다.